This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 21 CFR 173.357(a)(2) | FDA Publication | 1989 | Methodology for Ethylenimine Detection in Polyethylinimine | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 33 CFR 143.405(a)(10) | UL 1123 | 1987 | Marine Buoyant Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 1.24(a)(6)(iii) | NIST Handbook 44 | 2010 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 160.156-19(a) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IE (5) | ASTM D 2460 | 1990 | Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water | ASTM International | |
Coast Guard | 33 CFR 155.1050(k)(2)(iv) | ASTM F 1737 | 2007 | Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(5)(i) | EPA-600-4-79-020 | 1983 | Method 218.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 162.060-5(b)(1) | IEC 60529 | 2001 | Classification of Degrees of Protection by Enclosures (IP Code), Edition 2.1 consolidated with amendment 1:1999 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 161.002-4(b)(1) | UL 268 | 1994 | Smoke Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 10.107(b) Invalid credential | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 315 | 1993 | Seamless Copper Alloy Pipe Tube | ASTM International | |
Coast Guard | 46 CFR 110.10-1(b)(2) | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(I)(6)(iii) | APHA Method 4500-Cl F | 1995 | Chlorine, DPD Ferrous Titrimetric | American Public Health Association | |
Coast Guard | 46 CFR 116.300(b)(1) | Lloyd's Publication | 1990 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 164.120-5(b)(11) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 46 CFR 160.005-1(a)(1) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Coast Guard | 33 CFR 157.445(a) | IMO Resolution A.751(18) | 1994 | Interim Standards for Ship Manoeuverability | International Maritime Organization | |
Coast Guard | 46 CFR 160.174-17(g) | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(3)(ii) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 27 CFR 21.38(a) | The United States Pharmacopoeia | 1980 | Formula No. 4 | U.S. Pharmacopeial Convention | |
Coast Guard | 33 CFR 183.430(a)(2)(ii) | SAE J-1127 | 1980 | Battery Cable | Society of Automotive Engineers | |
Coast Guard | 46 CFR 182.415(c)(1) | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.25-20(b) | ASME B18.2.2 | 1987 | Square and Hex Nuts (Inch Series) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 444.12(b)(1) Table (2) | ASTM D 3557C | 2007 | Standard Test Methods for Cadmium in Water | ASTM International | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 182/A 182M | 1997 | Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | ASTM International | |
Coast Guard | 27 CFR 21.81(a) | National Formulary | 1980 | Formula No. 46 | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 52.01-5(b)(3) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers 2001 DHS/USCG | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 8 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60, Appendix A-3, Method 5, Section 7.1.3 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Coast Guard | 46 CFR 56.30-10(b)(5) | ASTM A 36/A 36M | 1997 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 46 CFR 56.01-2(b)(4) | ANSI/ASME B16.15 | 1994 | Cast Bronze Threaded Fittings, Classes 125 and 250 | American National Standards Institute | |
Coast Guard | 36 CFR 1237.28(d)(2) | ISO 2859-1 | 1996 | Sampling Procedures for Inspection by Attributes--Part 1: Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection | International Organization for Standardization | |
Coast Guard | 46 CFR 90.35-1(a) | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping | |
Coast Guard | 21 CFR 177.1590(c) | ASTM D 968 | 1981 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester | ASTM International | |
Coast Guard | 46 CFR 111.105-1 | IEC 79-6 | 1995 | Electrical Apparatus for Explosive Gas Atmospheres—Part 6: Oil Immersion “o”, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.01-2(e)(53) | ASTM B 111 | 1995 | Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock | ASTM International | |
Coast Guard | 10 CFR 440 Appendix A | ASTM C 509 | 1984 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material | ASTM International | |
Coast Guard | 46 CFR 111.30-19(b)(4) | IEC 332-1 | 1993 | Test on Electric Cables Under Fire Conditions, Part 1: Test on a Single Vertical Insulated Wire or Cable | International Electrotechnical Commission | |
Coast Guard | 46 CFR 58.10-5(d)(1) | NFPA 302 | 1989 | Fire Protection Standard for Pleasure and Commercial Craft | National Fire Protection Association | |
Coast Guard | 33 CFR 164.03(b) | RTCM Paper 191-93/SC112-X | 1993 | Recommended Standards for Marine Radar Equipment Installed on Ships of 300 Tons Gross Tonnage and Upwards | Radio Technical Commission for Maritime Services | |
Coast Guard | 46 CFR 175.600(b) Table | IEEE 45 | 1977 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 161.002-1(b) | UL 864 | 1991 | Control Units for Fire-Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 110.10-1(o)(15) | UL 1309 | 1995 | Marine Shipboard Cables | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 125.180(b) | ABYC E-9 | 1990 | Direct-Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 21 CFR 172.167(b) | Food Chemicals Codex | 2008 | Food Chemicals Codex, 6th Edition | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 160.022-1(a)(1) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 116.440(c) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 148.55(b) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 111.60-5(a)(2) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
Coast Guard | 33 CFR 183.516(a)(1)(i) | ASTM D 471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International |