This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.159 (3) | NFPA 13 | 2013 | Automatic Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 88 FR 18396 | 40 CFR 51 | ASTM D6522-00(2005) | 2013 | Testing Provisions for Air Emission Sources | ASTM International |
Energy Department | 88 FR 28780 | 10 CFR 431 | ANSI/ASHRAE 41.1–2013 | 2013 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Federal Trade Commission | 84 FR 20777 | 16 CFR 460 | ASTM E 408–13 | 2013 | Labeling and Advertising of Home Insulation: Trade Regulation Rule | ASTM International |
Housing and Urban Development Department | 24 CFR 3280.4(a) | NSF All Standards | 2013 | All specifications, standards and codes without specific reference | National Sanitation Foundation | |
Housing and Urban Development Department | 88 FR 19450 | 24 CFR 100 | HUD 2013 Rule | 2013 | Reinstatement of HUD's Discriminatory Effects Standard | U.S. Department of Housing and Urban Development |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 86 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 55.14(e)(3)(ii)(F) | 40 CFR part 52, subpart F | 2013 | State of California, Santa Barbara County Air Pollution Control District Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 30.10-27 Table 30.10-27 | ASTM D 56 | 2013 | Standard Test Method for Flash Point by Tag Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(33) | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Transportation Department | 87 FR 44944 | 49 CFR 173 | ISO 10462:2013 | 2013 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Federal Aviation Administration | 14 CFR 91 Special Aviation Regulation 108 (9) | TAS Publication | 2013 | Mitsubishi Heavy Industries MU-2B Checklists | Turbine Aircraft Services | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(1) Table 1 | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Coast Guard | 46 CFR 162.018-1(b)(2)(i) | CGA S-1.2.5.2 | 2013 | Flow test data for safety and relief valves for use on pressure vessels | Compressed Gas Association | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | NEMA All Standards | 2013 | All specifications, standards, and codes without specific reference | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 80.47(k)(4) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.12045 | NFPA 70 | 2013 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 80.1426(f)(7)(v)(B) | ASTM D 4444 | 2013 | Standard Test Method for Use and Calibration of Hand-Held Moisture Meters | ASTM International | |
Interior Department | 84 FR 24705 | 30 CFR 250 | API Spec 6AV1 | 2013 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.1202(a)(3)(iv) | API MPMS | 2013 | Chapter 11, Section 1 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(ix) | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(40) | ASTM D 5798 | 2013 | Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AAMA All Standards | 2013 | All specifications, standards and codes without specific reference | American Architectural Manufacturers Association | |
Environmental Protection Agency | 40 CFR 80.47(o)(2)(ii) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 149 | 2013 | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA Publication | 2013 | NFPA Handbook | National Fire Protection Association | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 1043 | ASTM D93–13 | 2013 | Fuels Regulatory Streamlining | ASTM International |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | ASTM E 162 | 2013 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | 2013 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 80.580(e)(1)(iv) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(70) | API RP 14FZ | 2013 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(b) | API Spec 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(5)(iii) | 29 CFR 1910.253(b)(1)(ii) | 2013 | Cylinders and Containers, Approval and Marking | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.120(j)(1)(ii) | 29 CFR 1910.120 | 2013 | Hazardous Waste Operations and Emergency Response | Occupational Safety and Health Administration, U.S. Department of Labor | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | NFRC All Standards | 2013 | All specifications, standards, and codes without specific reference | National Fenestration Rating Council | |
Housing and Urban Development Department | 24 CFR 200.929(b)(1) | HUD MPS | 2013 | One and Two Family Dwellings | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 80.46(a)(3) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 80.47(r)(1)(vi) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | NWWDA All Standards | 2013 | All specifications, standards and codes without specific reference | National Wood Window and Door Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA (5) | Colilert® Method | 2013 | Colilert Test Kit | IDEXX Laboratories | |
Occupational Safety and Health Administration | 29 CFR 1910.159(a)(2) | NFPA 13 | 2013 | Automatic Sprinkler Systems | National Fire Protection Association | |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.833 | API Spec. 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 80 | SAE J2966_201309 | 2013 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 162.018-7(a) | CGA S-1.2.5.2 | 2013 | Flow test data for safety and relief valves for use on pressure vessels | Compressed Gas Association | |
Federal Railroad Administration | 49 CFR 235.12(b) | AAR Publication | 2013 | Graphic Symbols | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 80.47(k)(4) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Environmental Protection Agency | 40 CFR 80.1426(f)(8)(ii)(B) | ASTM D 1250 | 2013 | Standard Guide for Petroleum Measurement Tables | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(e)(1) | CA State Regulations | 2013 | CAAC Title 8, Article 7, Section 5243, Logging and Sawmill Safety Orders, Tractor Yarding | State of California, Administrative Code | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | ASME All Standards | 2013 | All specifications, standards and codes without specific reference | American Society of Mechanical Engineers |