This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 49 CFR 172.519(f) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
National Highway Traffic Safety Administration | 49 CFR 572.153(c)(2) | Drawing No. 9001336 | 1987 | Jam Nut | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Permethrin) | EPA Method 608.2 | 1993 | The Determination of Certain Organochlorine Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.1201(a)(1)(ii) | MNHWMP | 1994 | EPA Approved Minnesota Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Minnesota | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | ASME MFC-4M | 1997 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 30.10-22(a)(Note 1) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 4 | CEM Publication | 1992 | Closed Vessel Microwave Digestion of Wastewater Samples for Determination of Metals | CEM Corporation | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 578 | 1987 | Insulation, Thermal (Organic Cellular for Preformed Block- type Polystyrene) | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11120 | 1999 | Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.107(d)(1) | NFPA 91 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 180.37(b) | Food Chemicals Codex | 1981 | Saccharin, Ammonium Saccharin, Calcium Saccharin, and Sodium Saccharin | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(vii) | AOCS Method Cd 8-53 | 1992 | Peroxide Value, Acetic Acid -- Chloroform Method | American Oil Chemists Society | |
Food and Drug Administration | 21 CFR 177.1990(c)(2) | ASTM D 3536 | 1976 | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquid Exclusion Chromatography (Gel Permeation Chromatography--GPC) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.165 | ANSI/NFPA 72A | 2014 | Local Protective Signaling Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/APA 1 | 1984 | Mosaic-Parquet Hardboard Slat Flooring | APA--The Engineered Wood Association | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(i) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(14) | EPA Method 531.1 | 1989 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM B 33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 13 | ASTM E 648 | 2000 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (25) | EPA Method 622.1 | 1993 | The Determination of Thiophosphate Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Chloride) | APHA Method 4500-Cl D | 1998 | Chlorine, Amperometric direct | American Public Health Association | |
Federal Trade Commission | 16 CFR 306.0(b) | ASTM D 4814 | 1992 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Coast Guard | 46 CFR 160.115-13(d)(1) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 200.946(a)(1)(iii) | ASTM C 920 | 1987 | Standard Specification for Elastomeric Joint Sealants | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 78051-148 | 1978 | Skull-Head (cast) Hybrid III | Reprographic Technologies | |
Coast Guard | 46 CFR 120.380(m) | UL 489 | 1995 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(2) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (24) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Hexachlorocyclopentadiene) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.104a(d)(3) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Minerals Management Service | 30 CFR 250.1202(g)(1) | API MPMS | 2013 | Chapter 4, Section 8 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 55.14(d)(5)(i) | 40 CFR part 52, subpart I | 2008 | State of Delaware Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Federal Highway Administration | 23 CFR 625.4(d)(2) | D1.4/D1.4M | 2011 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Environmental Protection Agency | 40 CFR 1065.720 Table 1 | ASTM D 2163 | 2007 | Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propane Concentrates by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(m)(3) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Veterans Affairs Department | 38 CFR 17.63(a)(2) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 46 CFR 182.455(c) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 63.14(g)(81) | ASTM D 6721 | 2001 | Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry | ASTM International | |
Agricultural Marketing Service | 7 CFR 51.888(a) | CA State Regulations | 1996 | California Code of Regulations, Title 3, Subchapter 4. Fresh Fruits, Nuts and Vegetables, Article 25, Table Grapes and Raisins | State of California, Code of Regulations | |
Veterans Affairs Department | 38 CFR 17.81(a)(1)(i) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-45 | 2003 | Bypass and Drain Connection Standard | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Research and Special Programs Administration | 49 CFR 195.432(c) | API 510 | 1997 | Pressure Vessel Inspection Code | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (32) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3113 B | 1995 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(e)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 63.626(d)(3)(v)(B) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method B—Gravimetric Quimociac Method | Association of Florida Phosphate Chemists | |
Public Health Service | 42 CFR 52b.12(c)(7)(iv) | NFPA 101 | 1997 | Life Safety Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 178.337-2(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2)(iv) | Drawing No. 175-3000 | 2009 | Shoulder Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation |