This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort descending |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(3) | ANSI/AISC 360 | 2005 | Specification for Structural Steel Buildings | American Institute of Steel Construction | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AISC All Standards | 2013 | All specifications, standards and codes without specific reference | American Institute of Steel Construction | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | AISC S335 | 1989 | Specification for Structural Steel Buildings--Allowable Stress Design and Plastic Design | American Institute of Steel Construction | |
Rural Utilities Service | 7 CFR 1728.202(b)(10)(ii) | AITC 200 | 2004 | Inspection Manual | American Institute of Timber Construction | |
Rural Utilities Service | 7 CFR 1728.97(b)(1) | AITC 200 | 2004 | Inspection Manual | American Institute of Timber Construction | |
Agriculture Department | 84 FR 28186 | 7 CFR 1728 | AITC 200–2009 | 2009 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers | American Institute of Timber Construction |
Rural Utilities Service | 7 CFR 1728.201(a)(9) | AITC 200 | 2004 | Inspection Manual | American Institute of Timber Construction | |
Rural Utilities Service | 7 CFR 1728.202(c)(3) | AITC 200 | 2004 | Inspection Manual | American Institute of Timber Construction | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AITC All Standards | 2013 | All specifications, standards and codes without specific reference | American Institute of Timber Construction | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | AITC A190.1 | 1992 | Structural Glued Laminated Timber | American Institute of Timber Construction | |
Mine Safety and Health Administration | 30 CFR 71.402(b) | AIA Code | 1967 | National Building Code | American Insurance Association | |
Mine Safety and Health Administration | 30 CFR 71.402(b) | AIA Code | 1967 | National Building Code | American Insurance Association | |
Mine Safety and Health Administration | 30 CFR 75.1712-3(b) | AIA Code | 1967 | National Building Code | American Insurance Association | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | AISI Publication | 1996 | Specification for the Design of Cold-Formed Steel Structural Members | American Iron and Steel Institute | |
Housing and Urban Development Department | 24 CFR 3280.305(j)(1) | AISI Publication | 1996 | Specification for the Design of Cold-Formed Steel Structural Members | American Iron and Steel Institute | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | ASCE 19 | 1996 | Manual for Structural Applications of Steel Cables for Buildings | American Iron and Steel Institute | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AISI All Standards | 2013 | All specifications, standards and codes without specific reference | American Iron and Steel Institute | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | SEI/ASCE 8 | 2002 | Specification for the Design of Cold-Formed Stainless Steel Structural Members | American Iron and Steel Institute | |
Housing and Urban Development Department | 24 CFR 3280.305(j)(1) | SEI/ASCE 8 | 2002 | Specification for the Design of Cold-Formed Stainless Steel Structural Members | American Iron and Steel Institute | |
Research and Special Programs Administration | 18 CFR 33.32(a)(3) | ALI Publication | 1992 | Restatement of the Law (Third) Trusts Section 227 | American Law Institute | |
Federal Energy Regulatory Commission | 18 CFR 35.33(c) | ALI Publication | 1992 | Restatement of the Law (Third) Trusts Section 227 | American Law Institute | |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C82.9–2016 | 2016 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(v) | ANSI Z41 | 1991 | Protective Footwear | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z21.66 | 1988 | Electrically-Operated Automatic Vent Damper Devices for Use with Gas-Fired Appliances including Exhibits A and B | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(iv) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S6.4 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Energy Department | 10 CFR 430.32(x)(1)(ii) | ANSI C81.61 | 2006 | Electrical Lamp Bases--Specifications for Bases (Caps) for Electric Lamps | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI A112.26.1 | 1975 | Water Hammer Arresters | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.3.2 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(12) | ANSI A90.1 | 1969 | Safety Standard for Manlifts | American National Standards Institute | |
Energy Department | 10 CFR 431.105(b) | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | American National Standards Institute | |
Public Health Service | 42 CFR 84.113 | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(16) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(ix) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Energy Department | 10 CFR 434.701.1 RS-13 | ANSI 101/I.S. 2 | 1997 | Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-13) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.218(e)(1)(iv) | ANSI B31.1.0 Addenda | 2014 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.266(e)(2)(i) | ANSI B175.1 | 1991 | Safety Requirements for Gasoline-Powered Chain Saws | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.552(b)(8) | ANSI A10.5 | 1969 | Safety Requirements for Material Hoists | American National Standards Institute | |
Food and Drug Administration | 21 CFR 801.420(c)(4) | ANSI S3.22 | 2003 | Specification for Hearing Aid Characteristics | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.72(a)(6) | ANSI A14.1 | 1975 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Coast Guard | 29 CFR 1910.261(a)(3)(iii) | ANSI A17.1a | 1967 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(1) | ANSI A14.1 | 1990 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Public Health Service | 42 CFR 84.1154(b) | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
Environmental Protection Agency | 85 FR 49724 | 40 CFR 63 | ANSI/ASME PTC 19.10–1981 | 1981 | National Emission Standards for Hazardous Air Pollutants: Miscellaneous Coating Manufacturing Residual Risk and Technology Review | American National Standards Institute |
Coast Guard | 33 CFR 142.39(b)(2) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
Energy Department | 87 FR 63860 | 10 CFR 431 | ANSI/AHRI 1230-2010 | 2010 | Energy Conservation Program: Test Procedure for VRF Multi-Split Systems | American National Standards Institute |
Energy Department | 88 FR 17934 | 10 CFR 429 | ANSI/ASME MFC–5M–1985 (R2001) | 2006 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American National Standards Institute |
Energy Department | 88 FR 21061 | 10 CFR 429 | ANSI/IES LM-54-20 | 2020 | Energy Conservation Program: Test Procedure for Ceiling Fan Light Kits | American National Standards Institute |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.7 | 1997 | Prefabricated Plastic Spa Shells | American National Standards Institute | |
Energy Department | 10 CFR 430.2, Definitions, ER incandescent reflector lamp (2) | ANSI C78.21 | 1989 | Electric Lamps--PAR and R Shapes | American National Standards Institute |