This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 33 CFR 126.15(a)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 174.360 | IMO Resolution MSC.216(82) | 2006 | Adoption of Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended | International Maritime Organization | |
Coast Guard | 46 CFR 54.01-2(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(12)(ii) | EPA-600-4-79-020 | 1983 | Method 270.3--Atomic Absorption: gaseous hydride | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 113.30-25(i) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 119.440(a)(2)(i) | ASTM D 635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (10) | APHA Method 3111 D | 2005 | Flame AAS by Direct Nitrous Oxide-Acetylene Flame Method | American Public Health Association | |
Coast Guard | 46 CFR 28.380(h) Note | DOC FF 4-72.16 | 2012 | Standard for Mattress Flammability | U.S. Department of Commerce | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) Footnote 14 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.01-2(k)(4) | MSS SP-44 | 2001 | Steel Pipe Line Flanges | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 56.95-10(c)(4) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 24 CFR 3280.808(m) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 114.400(b), Flame spread | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | ASTM E 648 | 1997 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Coast Guard | 46 CFR 197.328(a) | ASME PVHO-1 | 2000 | Safety Standard for Pressure Vessels for Human Occupancy | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 181.425(b) | NFPA 17 | 1985 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 32.20-10 | ASTM F 1273 | 2007 | Standard Specification for Tank Vent Flame Arresters | ASTM International | |
Coast Guard | 29 CFR 1915.155(b)(1)(i) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 46 CFR 54.01-5(c)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 197.328(d)(3) | ASME PVHO-1 | 2000 | Safety Standard for Pressure Vessels for Human Occupancy | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 27.102(b) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 28.535(d) | ASTM F 1321 | 1997 | Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine Light Ship Displacement and Centers of Gravity of a Vessel | ASTM International | |
Coast Guard | 29 CFR 1915.155(b)(2) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 46 CFR 54.03-1 | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 10.225(b)(3)(iv) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 121.240(d) | ABYC A-1 | 1993 | Marine Liquified Petroleum Gas (LPG) Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 63.15-1(b) | ASME CSD-1 | 2004 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.600(b) | Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 129.340(n) | IEEE 45 | 1977 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 40 CFR 60.251(a) Anthracite | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 40 CFR 60.41c Distillate oil | ASTM D 975 | 1978 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 154.188 | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 111.05-33(b) | NEC 2002 | 1997 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 46 CFR 160.013-3(b) | Drawing No. 160.013-1 | 2012 | Hatchet (Lifeboat and Liferaft) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.151-21(x) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 2598 | 2012 | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis | ASTM International | |
Coast Guard | 46 CFR 160.060-1(b) | Drawing No. 160.060-1, Sheet 5 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model CYM | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.048-3(d)(2) | FedSpec CCC-C-700G | 1986 | Cloth, Coated, Vinyl, Coated (Artificial Leather) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 177.300(d)(1)(ii) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.077-21(c)(3) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 23 CFR 655.601(d)(1)(i) | AASHTO Publication | 1993 | Guide to Metric Conversion | American Association of State Highway and Transportation Officials | |
Coast Guard | 46 CFR 160.048-3(e) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Coast Guard | 21 CFR 172.785(b)(7) | FDA Publication | 2001 | Determination of Total Organic Carbon by Automated Analyzer | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.133-7(b)(3) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Coast Guard | 46 CFR 160.151-15(f) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, part 1: General Principles, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.151-33(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 109.563(a)(6) | ASTM F 1626 | 1996 | Symbols Used in Accordance with Regulation II-2/20 of the 1974 SOLAS Convention as amended PCN: 12-616260-01 | ASTM International | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 350/A 350M | 1997 | Standard Specification for Forgings, Carbon and Low-Alloy Steel, Requiring Notch Toughness Testing for Piping Components | ASTM International | |
Coast Guard | 46 CFR 56.01-2(b)(2) | ANSI/ASME B1.20.1 | 1983 | Pipe Threads, General Purpose (Inch) | American National Standards Institute |