This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 170.165(a) | IMO Resolution MSC 267(85) | 2008 | Adoption of the International Code on Intact Stability, 2008 (2008 IS Code) | International Maritime Organization | |
Coast Guard | 46 CFR 111.60-3(b)(3) | MIL-C-24640A | 1995 | Military Specification Cables, Light Weight, Electric, Low Smoke, for Shipboard Use, General Specification for (1995) Supplement 1 | U.S. Department of Defense | |
Coast Guard | 46 CFR 63.05-1(f)(1) | ISO 9096 | 2003 | Stationary source emissions—Manual determination of mass concentration of particulate matter, Second edition | International Organization for Standardization | |
Coast Guard | 33 CFR 156.111(b) | OCIMF Publication | 1989 | Ship to Ship Transfer Guide (Petroleum) | Oil Companies International Marine Forum | |
Coast Guard | 33 CFR 164.03(b) | IMO Resolution A.342 (IX) | 1975 | Recommendations on Performance Standards for Automatic Pilots | International Maritime Organization | |
Coast Guard | 46 CFR 154.24(a) | IMO Resolution A.328(IX) | 1975 | Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk | International Maritime Organization | |
Coast Guard | 46 CFR 160.060-3(b) | 46 CFR 164.013 | 2012 | Foam, Unicellular Polyethylene (Buoyant, Slab, Silted Trigonal Pattern) | U.S. Coast Guard | |
Coast Guard | 46 CFR 182.320(a)(3) | UL 1453 | 1988 | Electric Booster and Commercial Storage Tank Water Heaters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A249/A 249M | 1996 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | ASTM International | |
Coast Guard | 46 CFR 174.100(e)(2) | ASTM F1197 | 2000 | Standard Specification for Sliding Watertight Door Control Systems | ASTM International | |
Coast Guard | 46 CFR 114.400(b), Flashpoint | ASTM D93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 160.077-23(h)(5) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 127.003(b) | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM D975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 160.133-13(d)(2)(iii) | ASTM A653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 27 CFR 21.65(b)(1) 243 | National Formulary | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 160.151-31(d) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 161.002-4(b)(4) | ASTM B117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Coast Guard | 29 CFR 1910.6(e)(73) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 40 CFR 60, Appendix B, PS-12A, 8.4.2 | ASTM D6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 46 CFR 160.135-13(d)(4)(vii) | ASTM F1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Coast Guard | 33 CFR 157.02(c)(1) | OCIMF Publication | 1996 | International Safety Guide for Oil Tankers and Terminals, Fourth Edition, Chapters 6, 7, and 10 | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 160.151-21(h) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 52.25-3 | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 54.25-15(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.151-17 | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-11(c)(2)(ii) | ASTM A653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 33 CFR 140.7(b) | IMO Resolution A.414(XI) | 1979 | Code for Construction and Equipment of Mobile Offshore Drilling Units | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(b)(3) | ASTM A313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Coast Guard | 46 CFR 162.028-3(c)(6) | Federal Standard 151 | 1967 | Metals, Test Methods, Method 811 | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 60.485(g)(5) | ASTM D2504 | 1977 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 164.023-7(b)(2) | Federal Standard 191A | 1978 | Method 5804, Weathering Resistance of Cloth; Accelerated Weathering Method | Federal Highway Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2) | ASTM D570 | 2005 | Standard Test Method for Water Absorption of Plastics | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(6) | MSS SP-51 | 2003 | Class 150LW Corrosion Resistant Cast Flanges and Flanged Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 56.01-2(e)(65) | ASTM B315 | 1993 | Seamless Copper Alloy Pipe Tube | ASTM International | |
Coast Guard | 46 CFR 175.800(b) | COMDTINST M16714.3 (Series) | 2013 | Equipment Lists, Items Approved, Certificated or Accepted under Marine Inspection and Navigation Laws | U.S. Coast Guard | |
Coast Guard | 23 CFR 650.807(c) | FHWA Notice 6640.22 | 1981 | USCG/FHWA Memorandum of Understanding on Coordinating The Preparation and Processing of Environmental Projects | Federal Highway Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.174-17(f) | ASTM C177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Coast Guard | 46 CFR 52.01-120(a)(6) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 27 CFR 21.38(a) | The United States Pharmacopoeia | 1980 | Formula No. 4 | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 56.15-5(c)(2)(ii)(B) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 63.25-9(f) | IMO Resolution MEPC.76(40) | 1997 | Standard Specification for Shipboard Incinerators | International Maritime Organization | |
Coast Guard | 46 CFR 111.33-11 | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B36.10M | 2004 | Welded and Seamless Wrought Steel Pipe | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 199.178(a) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D1886C | 1998 | Standard Test Methods for Nickel in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Coast Guard | 33 CFR 183.5(b) | SAE J-557 | 1968 | High Tension Ignition Cable | Society of Automotive Engineers | |
Coast Guard | 33 CFR 104.297(a) | IMO Conference Resolution 2 | 2002 | ISPS Code | International Maritime Organization | |
Coast Guard | 33 CFR 142.39(b)(2) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute |