This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 27.211(f)(1) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Coast Guard | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Coast Guard | 36 CFR 1235.4(e)(4) | ISO/IEC 15307 | 1997 | Information Technology--Data Interchange on 12.7 mm 128-track Magnetic Tape Cartridges--DLT 4 Format | International Organization for Standardization / International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.052-1(b) | Drawing No. 160.052-1, Sheet 4 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Insert Patterns | U.S. Coast Guard | |
Coast Guard | 46 CFR 169.703(c)(5)(iv) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(ii) | EPA-600-4-79-020 | 1983 | Method 202.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 42 CFR 37.43 | NCRP Report No. 33 | 1968 | Medical X-ray and Gamma-Ray Protection for Energies Up to 10 MeV--Equipment Design and Use | National Council on Radiation Protection and Measurement | |
Coast Guard | 46 CFR 160.060-3(d)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Coast Guard | 46 CFR 54.05-10(a) | ASTM A 20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 160.077-23(h)(7) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 182.440(a)(1) Table 182.440(a)(1) | ASTM B 127 | 1998 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip | ASTM International | |
Coast Guard | 46 CFR 160.047-3(c) | MIL-B-2766 | 1962 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Coast Guard | 33 CFR 126.15(b)(3) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 40 CFR 1065.1010(e)(4) | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Coast Guard | 46 CFR 160.133-15(e) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 160.151-15(o) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 10370 | 1996 | Petroleum products-- Determination of carbon residue--Micro method | International Organization for Standardization | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 160.135-15(e)(1)(iii) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 46 CFR 160.156-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel, | ASTM International | |
Coast Guard | 10 CFR 440 Appendix A | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC P-1 | 1973 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.156-13(d)(4) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
Coast Guard | 40 CFR 60.116b(f)(2)(i) | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Coast Guard | 46 CFR 15.1103(a) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 162.028-3(e) | MIL-STD-167 | 1963 | Mechanical Vibrations of Shipboard Equipment | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.01-2(e)(74) | ASTM F 1123 | 2010 | Standard Specification for Non-Metallic Expansion Joints | ASTM International | |
Coast Guard | 46 CFR 110.10-1(k)(6) | NEMA WC-70/ICEA S-95-658 | 1999 | Standard for Non-Shielded Power Rated Cable 2000V or Less for the Distribution of Electrical Energy | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 164.120-5(b)(1) | ASTM D 543 | 2006 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents | ASTM International | |
Coast Guard | 33 CFR 155.140(c)(2) | ASTM F 715 | 1995 | Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage | ASTM International | |
Coast Guard | 46 CFR 52.20-25(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 39.1005(i)(1) | OCIMF Publication | 2006 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 33 CFR 143.207(c) | IMO Resolution A.414(XI) | 1979 | Code for Construction and Equipment of Mobile Offshore Drilling Units | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(i) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 33 CFR 154.810(g) | OCIMF Publication | 1996 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 129.550(a) | ABYC A-3 | 1993 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Coast Guard | 46 CFR 176.900(a) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 56.15-1(c)(2)(ii) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 183.435(a)(3) | IEEE 45 | 1983 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 21 CFR 172.810 | Food Chemicals Codex | 1981 | Dioctyl Sodium Sulfosuccinate | National Academy Press | |
Coast Guard | 46 CFR 52.01-120(b)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B18.2.2 | 1987 | Square and Hex Nuts (Inch Series) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.105-11(a) | IEC 60079-11 | 1999 | Electrical Apparatus for Explosive Gas Atmospheres—Part 11: Intrinsic Safety “i”, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 33 CFR 183.5(b) | UL 1128 | 1977 | Marine Blowers | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1996 | U.S. Supplement to ABS Rules for Steel Vessels for Vessels of International Voyages | American Bureau of Shipping | |
Coast Guard | 46 CFR 63.25-9(f)(6) | ISO 9096 | 2003 | Stationary source emissions—Manual determination of mass concentration of particulate matter, Second edition | International Organization for Standardization | |
Coast Guard | 46 CFR 111.105-5 | IEC 60079 | 2008 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
Coast Guard | 29 CFR 1926.6(dd)(14) | SAE J-396 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Coast Guard | 21 CFR 131.157(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 21 CFR 170.3(o) | NAS Report | 1972 | A Comprehensive Survey of Industry on the Use of Food Chemicals Generally Recognized as Safe | National Academy of Sciences, National Research Council |