This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 175.600(b) Table | ABYC A-22 | 1993 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(ii) | EPA-600-4-79-020 | 1983 | Method 202.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.055-1(a)(4) | ASTM D 570 | 1995 | Standard Test Method for Water Absorption in Plastics | ASTM International | |
Coast Guard | 46 CFR 160.062-3(a) | MIL-R-15041C | 1960 | Releases, Lifesaving Equipment, Hydraulic and Manual | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.01-2(d)(26) | ASME B36.10M | 2004 | Welded and Seamless Wrought Steel Pipe | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 182.415(c)(1) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 116.423(a)(4) | ASTM E 648 | 1997 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Coast Guard | 46 CFR 160.115-5(b)(3) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 40 CFR 1065.1010(e)(4) | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Coast Guard | 46 CFR 25.45-2(b)(5)(iii) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 160.135-5(b)(7) | ASTM B 209 | 2007 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Coast Guard | 46 CFR 160.151-21(d) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IA | APHA Method 9221 B | 2006 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Coast Guard | 46 CFR 151.04-7(a)(1) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.151-5(e)(1) | ISO 15738:2002(E) | 2002 | Ships and marine technology—Gas inflation systems for inflatable life-saving appliances, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.156-5(b)(11) | ASTM D 4029 | 2009 | Standard Specification for Finished Woven Glass Fabrics | ASTM International | |
Coast Guard | 10 CFR 440 Appendix A | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 59.01-2(b)(4) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.156-15(e)(1)(vii) | ISO 15372:2000(E) | 2002 | Ships and marine technology—Inflatable rescue boats—Coated fabrics for inflatable chambers, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 177.300(b)(1) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Coast Guard | 40 CFR 60.116b(f)(2)(i) | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Coast Guard | 46 CFR 15.1103(a) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 160.051-7(j) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(45) | ASTM B 26/B 26M | 1997 | Standard Specification for Aluminum-Alloy Sand Castings | ASTM International | |
Coast Guard | 46 CFR 162.050-20(a)(2) | ISO 8217 | 2005 | Petroleum products—Fuels (class F)—Specifications of marine fuels | International Organization for Standardization | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-11 | 1999 | Electrical Apparatus for Explosive Gas Atmospheres—Part 11: Intrinsic Safety “i”, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 110.10-1(k)(6) | NEMA WC-70/ICEA S-95-658 | 1999 | Standard for Non-Shielded Power Rated Cable 2000V or Less for the Distribution of Electrical Energy | National Electrical Manufacturers Association | |
Coast Guard | 21 CFR 173.25(b)(2)(ii)(B) | FDA Publication | 1988 | Determination of 3-Dimethylaminopropylamine in Food Simulating Extracts of Ion Exchange Resins 1998 HHS/FDA | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 164.120-5(b)(10) | ASTM D 2583 | 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM International | |
Coast Guard | 46 CFR 111.105-7(b) | NFPA 496 | 2003 | Standard for Purged and Pressurized Enclosures for Electrical Equipment | National Fire Protection Association | |
Coast Guard | 21 CFR 184.1139(b) | Food Chemicals Codex | 1981 | Ammonium Hydroxide | National Academy Press | |
Coast Guard | 33 CFR 164.03(b) | RTCM Paper 12-78/DO-100 | 1977 | Minimum Performance Standards, Loran C Receiving Equipment | Radio Technical Commission for Maritime Services | |
Coast Guard | 33 CFR 157.02(b)(8) | IMO Resolution A.751(18) | 1993 | Interim Standards for Ship Manoeuvrability, Annex sections 1.2, 2.3-2.4, 3-4.2, and 5 with Explanatory Notes in MSC/Circ. 644 | International Maritime Organization | |
Coast Guard | 46 CFR 39.1005(i)(1) | OCIMF Publication | 2006 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(3)(i) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 33 CFR 96.370(a)(1) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(20) | ASTM A 249/A 249M | 1996 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | ASTM International | |
Coast Guard | 46 CFR 181.320(b)(3) | NFPA 1963 | 1989 | Fire Hose Connections | National Fire Protection Association | |
Coast Guard | 46 CFR 56.25-20(b) | ASME B18.2.1 | 1996 | Square and Hex Bolts and Screws (Inch Series) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 129.550(a) | ABYC A-3 | 1993 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Coast Guard | 46 CFR 12.05-3(c) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.174-3(b) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 46 CFR 160.174-3(b) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 52.01-140(c) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 4 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 172.810 | Food Chemicals Codex | 1981 | Dioctyl Sodium Sulfosuccinate | National Academy Press | |
Coast Guard | 46 CFR 182.440(a)(1) Table 182.440(a)(1) | ASTM B 127 | 1998 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip | ASTM International | |
Coast Guard | 33 CFR 154, Appendix B, 3.3.2 | MSC Circular 373 | 1988 | Revised Standards for the Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 90.05-10(a)(2)(i) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization |