This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 855 | 2009 | Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(6) | CGA P-1 | 1965 | Safe Handling of Compressed Gases | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(15)(iv) | ANSI Z99.1 | 1969 | Title Not Found | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(31) | NFPA 505 | 1969 | Standard for Type Designations, Areas of Use, Maintenance, and Operation of Powered Industrial Trucks | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(vi) | ANSI B31.1.0a Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Occupational Safety and Health Administration | 40 CFR 1065.705 Table 1 | ISO 10307-2 | 2009 | Petroleum products--Total sediment in residual fuel oils--Part 2: Determination using standard procedures for ageing | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(8) | ANSI A14.2 | 1956 | Safety Code for Portable Metal Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(iii)(C) | NFPA 203M | 1970 | Manual on Roof Coverings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.507(b)(1) | NFPA 10 | 2002 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(3)(ii) | NFPA 58 | 2011 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.507(b)(2) | NFPA 14 | 2003 | Standard for the Installation of Standpipe, Private Hydrant, and Hose Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(a)(2)(iii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(15)(ii) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(19) | ASTM D 240 | 2007 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.268(s)(1)(v) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(7) | ASME B56.6 | 1992 | Safety Standard for Rough Terrain Forklift Trucks with addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1918.103(b)(1)(i) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1742 | 2011 | Standard Specification for PVC Insulating Sheeting | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | ANSI/NFPA 194 | 2014 | Fire Hose Connections | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | 29 CFR 1910.107(b)(1) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(24) | ANSI Z35.1 | 1968 | Specifications for Accident Prevention Signs | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(3) | NFPA 1001 | 2013 | Fire Fighter Professional Qualifications | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.57(h)(1)(ii) | NFPA 33 | 1969 | Spray Finishing Using Flammable and Combustible Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(4)(iii)(A) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(5) | ANSI B30.5, 5-1.3.2 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Load Hoist Mechanism | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(u)(4) | SAE J-397 | 1988 | Deflection Limiting Volume-ROPS/FOPS Laboratory Evaluation | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(i)(A) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(vii) | ANSI Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(17) | ANSI B20.1 | 1957 | Safety Code for Conveyors, Cableways, and Related Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(vi) | ASTM A 126 | 1966 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.133(b)(2) | ANSI Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.181(b)(2) | ANSI B30.6 | 1969 | Safety Code for Derricks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.552(b)(8) | ANSI A10.5 | 1969 | Safety Requirements for Material Hoists | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(13)(i) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.68(b)(12) | ANSI A14.3 | 1956 | Safety Requirements for Fixed Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-320a | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1236 | 2012 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.453(b)(3) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(l)(4) | ASME B30.14 | 2004 | Side Boom Tractors | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(1)(ii) | SAE J-987 | 2003 | Lattice Boom Cranes—Method of Test | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.165 | ANSI/NFPA 71 | 2014 | Central Station Signaling Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 34 | 2003 | Dipping and Coating Processes Using Flammable or Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(7) | NFPA 36 | 1967 | Standard for Solvent Extraction Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(2) | UL 80 | 1963 | Steel Inside tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(3) | API 12D | 1957 | Specification for Large Welded Production Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-231 | 1981 | Minimum Performance Criteria for Falling Object Protective Structures (FOPS) | Society of Automotive Engineers |