This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Agriculture Department | 84 FR 28186 | 7 CFR 1728 | AWPA A6–15 | 2015 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers | American Wood Protection Association |
Environmental Protection Agency | 87 FR 31185 | 40 CFR 63 | ASTM D4282-02(2015) | 2015 | National Emission Standards for Hazardous Air Pollutants: General Provisions; Technical Correction | ASTM International |
Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/AWWA E103–2015 | 2015 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Water Works Association |
Environmental Protection Agency | 40 CFR 272.1151(a) | MIHWMP | 2015 | State of Michigan Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Michigan | |
Environmental Protection Agency | 40 CFR 268.7(b)(1) | EPA SW-846 | 2015 | Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435 Appendix 8, Subpart A | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant resin (1) | ASTM C 581 | 2015 | Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEEE C37.27–2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Environmental Protection Agency | 40 CFR 59.505(c) | EPA Method 311 | 2015 | Analysis of Hazardous Air Pollutant Compounds in Paints and Coatings by Direct Injection into a Gas Chromatograph (40 CFR part 63, appendix A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 258 | 2015 | Criteria for Municipal Solid Waste Landfills | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 85 FR 41100 | 40 CFR 63 | ASTM D2111-10(2015) | 2015 | NESHAP: Surface Coating of Automobiles and Light-Duty Trucks; Miscellaneous Metal Parts and Products; Plastic Parts and Products; Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Metal Furniture Residual Risk and Techn... | ASTM International |
Environmental Protection Agency | 40 CFR 98.7(k)(1) | APHA Method 2540 G | 2015 | Total, Fixed, and Volatile Solids in Solid and Semisolid Samples | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 3(a) | EPA Method 1631 | 2015 | Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry | U.S. Environmental Protection Agency | |
Health and Human Services Department | 86 FR 68728 | 21 CFR 1 | ISO/IEC 17025:2017 | 2015 | Laboratory Accreditation for Analyses of Foods | International Organization for Standardization |
Postal Service | 39 CFR 111.3 | USPS DMM 2015 | 2015 | Mailing Standards of the United States Postal Service, Domestic Mail Manual | U.S. Postal Service | |
Environmental Protection Agency | 85 FR 10828 | 40 CFR 63 | ASTM D2111–10 (2015) | 2015 | National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans and Surface Coating of Metal Coil Residual Risk and Technology Reviews | ASTM International |
Environmental Protection Agency | 84 FR 9590 | 40 CFR 63 | ASTM D2111-10(2015) | 2015 | National Emission Standards for Hazardous Air Pollutants: Surface Coating of Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Surface Coating of Metal Furniture Residual Risk and Technology Reviews | ASTM International |
Transportation Department | 85 FR 8104 | 49 CFR 192 | API RP 1170 | 2015 | Pipeline Safety: Safety of Underground Natural Gas Storage Facilities | American Petroleum Institute |
Transportation Department | 85 FR 27810 | 49 CFR 173 | ISO 11120:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(4)(i) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 272, Subpart XX | WVHWMP | 2015 | State of West Virginia Hazardous Waste Management Program (Reserved) | State of West Virginia | |
Energy Department | 87 FR 65856 | 10 CFR 429 | ANSI/ASHRAE 29-2015 (R2018) | 2015 | Energy Conservation Program: Test Procedure for Automatic Commercial Ice Makers | American National Standards Institute |
Environmental Protection Agency | 40 CFR 268.7(c)(2) | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435 Appendix 8, Subpart A | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 88 FR 10468 | 40 CFR 770 | BS EN ISO 12460–5:2015 E | 2015 | Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products | British Standards Institution |
Environmental Protection Agency | 40 CFR 63.99(a)(20)(iii) | ME State Regulations | 2015 | Maine Regulations Applicable to Hazardous Air Pollutants | State of Maine | |
Transportation Department | 85 FR 27810 | 49 CFR 176 | ISO 22434:2006(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 63.99(a)(48)(ii) | WA State Regulations | 2015 | Puget Sound Clean Air's Regulation III, sections 3.03, Perchloroethylene Dry Cleaners | State of Washington | |
Environmental Protection Agency | 84 FR 9590 | 40 CFR 63 | ASTM D2369-10(2015)e1 | 2015 | National Emission Standards for Hazardous Air Pollutants: Surface Coating of Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Surface Coating of Metal Furniture Residual Risk and Technology Reviews | ASTM International |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(3) | APHA Method 601 | 2015 | Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.11(gg) | EPA Method 1619 | 2015 | Suspended Particulate Phase (SPP) Toxicity Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.45 Note 2 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 257 | 2015 | Criteria for Classification of Solid Waste Disposal Facilities and Practices | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.192(a)(3)(ii)(C) Note | API 1632 | 2015 | Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems | American Petroleum Institute | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | ANSI/ISA 12.12.01–2015 | 2015 | Update to Electrical Engineering Regulations | American National Standards Institute |
Environmental Protection Agency | 85 FR 10828 | 40 CFR 63 | ASTM D2369-10(2015)e1 | 2015 | National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans and Surface Coating of Metal Coil Residual Risk and Technology Reviews | ASTM International |
Transportation Department | 85 FR 8104 | 49 CFR 195 | API RP 1170, First Edition | 2015 | Pipeline Safety: Safety of Underground Natural Gas Storage Facilities | American Petroleum Institute |
Transportation Department | 85 FR 27810 | 49 CFR 173 | ISO 11623:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA Method 1670 | 2015 | Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 7 | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
Federal Trade Commission | 91 FR 20788 | 16 CFR 460.5 (e)(2)(vii) | ASTM C 1224-15 | 2015 | Standard Specification for Reflective Insulation for Building Applications | ASTM International |
Environmental Protection Agency | 40 CFR 435.41(e) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 6 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.061-1(a)(2) | MIL-A-140 | 2015 | Adhesive, Water Resistant, W.P. Barrier Material | U.S. Department of Defense | |
Environmental Protection Agency | 85 FR 41276 | 40 CFR 63 | ASTM D2111-10(2015) | 2015 | National Emission Standards for Hazardous Air Pollutants: Paper and Other Web Coating Residual Risk and Technology Review | ASTM International |
Federal Highway Administration | 23 CFR 625.4(d)(1)(viii)(A) | AASHTO LTS-6-I1 | 2015 | Interim Revisions to Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(4) | APHA Method 602 | 2015 | Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.15 Note 8 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency |