This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 3285.312(b)(3)(ii) | SEI/ASCE 32 | 2001 | Design and Construction of Frost-Protected Shallow Foundations | Structual Engineering Institute/American Society of Civil Engineers | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I) | Annual Book of Standards | 1996 | Annual Book of ASTM Standards | ASTM International | |
National Highway Traffic Safety Administration | 21 CFR 131.155(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 40 CFR 136.3(a) Table IF (Acetonitrile) | EPA Method 1671 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Gas Chromatography/ Flame Ionization Detector | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(18) | ASTM D 2099 | 2000 | Standard Test Method for Dynamic Water Resistance of Shoe Upper Maeser Water Penetration Tester | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM D 3678 | 1988 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Coast Guard | 46 CFR 160.002-4(b) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(2)(ii) | SAE J-4C | 1965 | Motor Vehicle Seat Belt Assembly | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | HCC Method 8009 | 1979 | Zincon Method for Zinc, Hatch Handbook of Water Analysis | Hach Chemical Company | |
Research and Special Programs Administration | 49 CFR 179.220-11(b) | AAR Specification M-1002 | 1992 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Federal Motor Carrier Safety Administration | 49 CFR 384.231(d) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
Food and Drug Administration | 21 CFR 172.380(b) | Food Chemicals Codex | 2004 | Vitamin D3 | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1588(b) | Food Chemicals Codex | 1981 | Pectins | National Academy Press | |
Federal Railroad Administration | 49 CFR 229 Appendix F Human Factors I (d)(4) | OET Bulletin 62 | 1993 | Understanding The FCC Regulations for Computers and other Digital Devices. | Federal Communications Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (11) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(e) Table II Footnote 5 | ASTM D 7365 | 2009 | Standard Practice for Sampling, Preservation, and Mitigating Interferences in Water Samples for Analysis of Cyanide | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 1147 | 1992 | Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.926e | CABO 1 & 2 Family Code | 1992 | CABO Code One and Two Family Dwelling Code with Errata Package and 1993 Amendments | Council of American Building Officials | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 3 | EPA Method 605 | 1982 | Benzidines by HPLC | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Prometryn) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 282.73(d)(1)(i)(B) | MNUSTP | 2000 | Minnesota Regulatory Requirements Applicable to the Underground Storage Tank Program | State of Minnesota | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(1) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 129.120(a)(3) | ABYC E-9 | 1990 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vi)(D) | ASTM A 526/A 526M | 1990 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 3173 | 2003 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Food and Drug Administration | 21 CFR 131.115(d)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Federal Trade Commission | 16 CFR 306.0(b) | ASTM D 2699 | 1992 | Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 24 | 2013 | Outside Protection | National Fire Protection Association | |
Energy Department | 10 CFR 435.4(a)(1)(ii) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(7) | ASTM B 88 | 1969 | Seamless Copper Water Tube | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Pamphlet 57 | 2003 | Emergency Shut-Off Systems for Bulk Transfer of Chlorine | Chlorine Institute, Inc. | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-995b | 2013 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.3 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.390(k)(10)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 40 CFR 60.116b(f)(2)(i) | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(114) | ASTM D 2986 | 1971 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(5)(i) | 29 CFR 1910.107(d) | 2014 | Ventilation | Occupational Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 46 CFR 164.015-4(g)(2) | ASTM D 1692T | 1968 | Test for Flammability of Plastic Sheeting and Cellular Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | AOAC Method 974.27 | 1988 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Iron) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.060-5(c) | Drawing No. 160.060-1, Sheet 5 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model CYM | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (PCBs (as Aroclors)) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.106a(a)(1)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.1.1 | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 8217 | 2005 | Petroleum products--Fuels (class F)--Specifications of marine fuels | International Organization for Standardization | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 1005.2.1 | ICC/IBC | 2000 | International Building Code | International Code Council | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A6 | 1989 | Method for the Determination of Oil-Type Preservatives and Water in Wood | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 5310 B | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 26, Section 7.1.2 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International |