This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63.1282(d)(3)(v)(B)(2) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.150(a)(1)(i) | Drawing No. 921022-001 | 2001 | Head Assembly | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1728.97(e)(6) | AWPA A7 | 2004 | Standard for Wet Ashing Procedures for Preparing Wood for Chemical Analysis | American Wood Protection Association | |
Energy Department | 10 CFR 431.19(c)(4) | CSA C390 | 1993 | Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) | Canadian Standards Association | |
Mine Safety and Health Administration | 30 CFR 56.6133(b) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Mine Safety and Health Administration | 30 CFR 75.1712-3(b) | AIA Code | 1967 | National Building Code | American Insurance Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(75) | API 2552 | 2007 | Measurement and Calibration of Sphere and Spheroids | American Petroleum Institute | |
Coast Guard | 46 CFR 131.855(d) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.123(c)(2) | Drawing No. 9000341 | 1987 | Jam Nut | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.131(d)(4)(i) | APHA Method 5310 D | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(j)(1) | CAARB Method 429 | 1989 | Determination of Polycyclic Aromatic Hydrocarbon (PAH) Emissions from Stationary Sources, amended July 28, 1997 | California Air Resources Board | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1564 | 2013 | Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.11(j) | Drawing No. SA 150 M002 | 1996 | Hybrid II 50th Male Dummy (?) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 153.4(b) | ASTM F 1122 | 1992 | Standard Specification for Quick Disconnect Couplings | ASTM International | |
Food and Drug Administration | 21 CFR 184.1535(b) | Food Chemicals Codex | 1981 | Niacinamide | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1296(b) | Food Chemicals Codex | 1981 | Ferric Ammonium Citrate | National Academy Press | |
Federal Highway Administration | 23 CFR 655.604(b) | Highway Safety Program Guideline 21 | 2021 | Roadway Safety | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (113) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | ASTM Annual Book of Standards | 1999 | ASTM Volume 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 60.41da Lignite | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.8450(e)(9) | EPA-454/R-98-015 | 1997 | Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (31) | APHA Method 4500-NH3 C | 1997 | Ammonia Nitrogen by Titration | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 179.101-1 Table Note 6 | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Coast Guard | 46 CFR 56.01-2(d)(6) | ASME B16.4 | 1998 | Gray Iron Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 315, Section 7.1.1 | ASTM D 2986 | 1995 | Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | AOAC Method 993.14 | 1998 | Tin-Total, mg/L | AOAC International | |
Coast Guard | 46 CFR 160.174-3(b) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME PTC 4.1 | 1991 | Power Test Codes: Test Code for Steam Generating Units | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(46) | ASTM F 1471 | 2009 | Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air-Filter System | ASTM International | |
Food and Drug Administration | 21 CFR 177.1630(e)(4)(v) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(6) | ASME UPV Code | 1951 | Code for Unfired Pressure Vessels for Petroleum Liquids and Gases | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 165.110(a)(2)(vii) | The United States Pharmacopeia | 1995 | United States Pharmacopeia | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 197.300(c) | ASME PVHO-1 | 2000 | Safety Standard for Pressure Vessels for Human Occupancy | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xlii) | ASTM D 3590 | 2006 | Standard Test Methods for Total Kjeldahl Nitrogen in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C1 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.179(b)(2) | ANSI B30.2.0 | 1967 | Safety Code for Overhead and Gantry Cranes | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 48 | 1967 | Labels of Independent Programs for Certifying Pressure-Treated Lumber and Plywood with 5 supplements | U.S. Department of Housing and Urban Development | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A 569/A 569M | 1991 | Standard Specification for Steel, Carbon (0.15 Maximum Percent), Hot-Rolled Sheet and Strip, Commercial Quality | ASTM International | |
Federal Aviation Administration | 14 CFR 27.613(d)(1) | MIL-HDBK-5 | 1978 | Metallic Materials and Elements for Flight Vehicle Structures | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(38) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. M, 1.11 | ASHRAE 51 | 1999 | Laboratory Methods for Testing Fans for Aerodynamic Performance Rating | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.176-8(k) | IMO SOLAS | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Phosmet) | EPA Method 622.1 | 1993 | Thiophosphate Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.651(c)(1)(i) | IDHWMP | 2012 | EPA-Approved Idaho Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Idaho | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API Bulletin 2509 B | 1987 | Shop Testing of Automatic Liquid Level Gages | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.104(e) | FedSpec QQ-P-416 | 1991 | Federal Specification Plating Cadmium (Electrodeposited) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 28.880(i) | SAE J-1475 | 1984 | Hydraulic Hose Fittings for Marine Applications | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(i)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association |