This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 1066.305 | SAE J-2263 | 2008 | Road Load Measurement Using Onboard Anemometry and Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix A (II)(J)(6) | EPA Method 2A | 2015 | Direct Measurement of Gas Volume through Pipes and Small Ducts, 40 CFR Part 60 Appendix A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.124(e)(2) | ASTM D 7359 | 2008 | Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) | ASTM International | |
Environmental Protection Agency | 40 CFR 89.6(a)(10) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Metribuzin) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 258.28(c)(1) | EPA SW-846 | 2004 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9095B | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1282(d)(3)(v)(B)(2) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Coast Guard | 33 CFR 142.39(a) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.010-1(d)(4) | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1049 | 1998 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Environmental Protection Agency | 40 CFR 63.4141(c) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(75) | API 2552 | 2007 | Measurement and Calibration of Sphere and Spheroids | American Petroleum Institute | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (19) | USGS I-3233-93 | 1989 | Chromium by Graphite Furnace Atomic Absorption | U.S. Geological Survey | |
Coast Guard | 46 CFR 131.855(d) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 86.1868-12(h)(5) | SAE J-2765 | 2008 | Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test Bench | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.123(c)(2) | Drawing No. 9000341 | 1987 | Jam Nut | Reprographic Technologies | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 13A | 1971 | Care and Maintenance of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.5 | ASTM D 4457 | 1991 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph | ASTM International | |
Food and Drug Administration | 21 CFR 184.1535(b) | Food Chemicals Codex | 1981 | Niacinamide | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1296(b) | Food Chemicals Codex | 1981 | Ferric Ammonium Citrate | National Academy Press | |
Federal Highway Administration | 23 CFR 655.604(b) | Highway Safety Program Guideline 21 | 2021 | Roadway Safety | Federal Highway Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 178.3870(f)(2) | ASTM D 1747 | 1978 | Standard Test Method for Refractive Index of Viscous Materials and Organosols at Low Shear Rates by Brookfield Viscometer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (113) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(d)(4)(i) | APHA Method 5310 D | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(j)(1) | CAARB Method 429 | 1989 | Determination of Polycyclic Aromatic Hydrocarbon (PAH) Emissions from Stationary Sources, amended July 28, 1997 | California Air Resources Board | |
Coast Guard | 46 CFR 114.600(b) | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Rural Utilities Service | 33 CFR 154, Appendix A, 8.6 | ASME B&PV Code | 2005 | Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.664(e)(4) | ASTM D 1946 | 1977 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1616.5(c)(4)(i) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | AOAC Method 993.14 | 1998 | Tin-Total, mg/L | AOAC International | |
Coast Guard | 46 CFR 54.15-10(h)(1) | CGA S-1.2.5.2 | 1979 | Flow Test of Safety Relief Valves | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | ASTM Annual Book of Standards | 1999 | ASTM Volume 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 60.41da Lignite | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.8450(e)(9) | EPA-454/R-98-015 | 1997 | Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1728.201(h)(2)(i) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
Energy Department | 10 CFR 435.2 | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
National Highway Traffic Safety Administration | 49 CFR 572.15(a) | Drawing No. SA 103C 081 | 1976 | Foot Assembly left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | ASTM D 882 | 1997 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting | ASTM International | |
Coast Guard | 46 CFR 154.1802(c)(1) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(6) | ASME UPV Code | 1951 | Code for Unfired Pressure Vessels for Petroleum Liquids and Gases | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 165.110(a)(2)(vii) | The United States Pharmacopeia | 1995 | United States Pharmacopeia | U.S. Pharmacopeial Convention | |
Research and Special Programs Administration | 49 CFR 179.220-7(g) | AAR Publication | 2000 | Specification for Tank Cars, Appendix M | Association of American Railroads | |
Coast Guard | 46 CFR 197.300(c) | ASME PVHO-1 | 2000 | Safety Standard for Pressure Vessels for Human Occupancy | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(13) | IEC 60079-15 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 15: Type of Protection “n”, Second Edition | International Electrotechnical Commission | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(38) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. M, 1.11 | ASHRAE 51 | 1999 | Laboratory Methods for Testing Fans for Aerodynamic Performance Rating | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.176-8(k) | IMO SOLAS | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xlii) | ASTM D 3590 | 2006 | Standard Test Methods for Total Kjeldahl Nitrogen in Water | ASTM International |