This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart Q | 1989 | Administrative Code | State of Illinois | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 739 | 1988 | Cellulose Loose- fill Insulation | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 11120 | 1999 | Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 72.13(a)(3) | ASTM D 975 | 1991 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.707(d)(1) | ANSI C72.1 | 1972 | Household Automatic Electric Storage Type Water Heaters | American National Standards Institute | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(ii) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (32) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | ASTM D 1687C | 1992 | Standard Test Methods for Chromium in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3111 D | 1999 | Atomic Absorption Direct | American Public Health Association | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Coast Guard | 46 CFR 160.115-15(e)(1) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2) | NHTSA Publication | 2009 | Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES-2re, Alpha Version) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 154.1400(b)(8) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(H) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section D Fecal Streptococci, 5 Pour Plate Method, page 143 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 59.208(k) | ASTM E 380 | 1993 | Standard Practice for Use of the SI International System of Units | ASTM International | |
Environmental Protection Agency | 40 CFR 433.11 | 40 CFR Part 136 | 2015 | Guidelines Establishing Test Procedures for the Analysis of Pollutants | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.164(a)(5) | ASTM D 4814 | 1995 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(iv) | ANSI A17.2a | 1965 | Practice for the Inspection of Elevators | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2.1 | ASTM D 2369 | 1987 | Standard Test Method of Volatile Content for Coatings | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.19(a) | Drawing No. SA 103C 030 | 1976 | Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.1450(a)(3) | NVUIC regulations | 1987 | Nevada Revised Statutes [NRS], Volume 28, Chapters 522.010 through 522.190, Inclusive | State of Nevada | |
Environmental Protection Agency | 40 CFR 63.5719(c)(4) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Coast Guard | 46 CFR 153.940(a)(2) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 1838 | 2014 | Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | ASTM International | |
Coast Guard | 27 CFR 21.78(a)(1) | The United States Pharmacopoeia | 1980 | Formula No. 42 | U.S. Pharmacopeial Convention | |
Research and Special Programs Administration | 49 CFR 193.2639 | NFPA 59A | 2001 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Coast Guard | 46 CFR 58.03-1(j)(2) | SAE J-429 | 1983 | Mechanical and Material Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 173.303(e) | CGA C-13 | 2000 | Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 177.1380(a)(4) | ASTM D 3275 | 1989 | Standard Specification for E-CTFE-Flouroplastic Molding Extrusion and Coating Materials | ASTM International | |
Agricultural Marketing Service | 7 CFR 201.58c | AOSA Handbook No. 26 | 1964 | Microbiological Assay of Fungicide--Treated Seeds | Association of Official Seed Analysis | |
Veterans Affairs Department | 38 CFR 39.63 | NFPA 101 | 2003 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Shoulder room dimension | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
Rural Utilities Service | 16 CFR 1616.32(a)(1) Note 7 | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | EPA Method 505 | 1995 | Analysis of Organohalide Pesticides and Commercial Polychlorinated Biphenyl (PCB) Products in Water by Microextraction and Gas Chromatography - Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.3.2.4 | ASTM D 1826 | 1994 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | NWWDA I.S. 6 | 1986 | Industry Standard for Wood Stile and Rail Doors | National Wood Window and Door Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(2) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(2) | API 650 | 1966 | Welded Steel Tanks for Oil Storage, Third Edition | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1728.201(e)(1)(iii) | ANSI O5.2 | 2006 | Standard for Wood Products, Structural Glued Laminated Timber for Utility Structures | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (49) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Energy Department | 10 CFR 433.4(a)(1)(i) | ASHRAE 90.1 | 2004 | Energy Standard for Buildings Except Low-Rise Residential Buildings | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 3649 | 1991 | Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 1072 | 1999 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Coast Guard | 46 CFR 160.176-8(a)(5) | Federal Standard 191A | 1978 | Method 5762, Mildew Resistance of Textile Materials: Soil Burial Method | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 7000 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(83) | ASTM F 1548 | 1994 | Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications | ASTM International | |
Environmental Protection Agency | 40 CFR 282.74(d)(1)(i)(A) | MSUSTP | 1996 | Mississippi Statutory Requirements Applicable to the Underground Storage Tank Program | State of Mississippi | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-48 | 1976 | Specification for Runway and Taxiway Edge Lights | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.102(a) | Drawing No. 92041-001 | 1992 | Head Form Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 260.11(b)(9) | ASTM E 260 | 1985 | Standard Practice for Packed Column Gas Chromatography | ASTM International |