This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.5220(b)(4)(v) | ASTM D6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1228.2 | ASTM F2907-19 | 2019 | Standard Consumer Safety Specification for Sling Carriers | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(1)(ii) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section III, 1989 Addenda through the latest edition, and addenda | American Society of Mechanical Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(2) | SAE J-583 | 2004 | Front Fog Lamp | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (10) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (11) | ASTM D4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Coast Guard | 46 CFR 114.400(b), Flashpoint | ASTM D93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 12.10-7 | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Animal and Plant Health Inspection Service | 7 CFR 300.3(a) | USDA Reference Manual A | 2000 | Reference Manual for Administration, Procedures, and Policies of the National Seed Health System | U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.047-1(a)(3) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 1065.703 Table 1 | ASTM D93 | 2013 | Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7191 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 76.01-2(b)(1) | ASTM F1121 | 2010 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Coast Guard | 46 CFR 160.151-21(k) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 184.240(c)(2) | ABYC A-22 | 1993 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (5) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D1886C | 1998 | Standard Test Methods for Nickel in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 608.1 | 1993 | The Determination of Organochlorine Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Environmental Protection Agency | 40 CFR 98.98 Properly measured destruction or removal efficiency | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Health and Human Services Department | 45 CFR 162.920(a)(9) | ASC X12N 270/271 | 2000 | Health Care Eligibility Benefit Inquiry and Response, Version 4010 | Washington Publishing Company | |
Coast Guard | 46 CFR 160.171-1 | IMO SOLAS | 1974 | International Convention for Safety of Life at Sea, Regulation 33 of Chapter III | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.870(g)(3)(iv) | ASTM D2287 | 1988 | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds | ASTM International | |
Food and Drug Administration | 21 CFR 178.3770(d)(3) | ASTM D1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 48 | 1967 | Labels of Independent Programs for Certifying Pressure-Treated Lumber and Plywood with 5 supplements | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(c) | EPA SW-846-3050B | 1996 | Acid Digestion of Sediments, Sludges, and Soils, Revision 2 | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1203.9 | ISO 6220 | 1983 | Draft Standard for Headforms for Use in the Testing of Protective Helmets | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D445 | 2001 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1965 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 265.198(b) | NFPA 30 | 1977 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.213 S6.3.1 | ASTM D1565 | 1976 | Standard Specification for Flexible Cellular Materials-- Vinyl Chloride Polymers and Copolymers (Open-Cell Foam) | ASTM International | |
Coast Guard | 33 CFR 96.430(a)(2)(ii) | ASQ Q9001 | 1994 | Quality Assurance in Design, Development, Production, Installation, and Servicing | American Society for Quality Control | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D2015 | 1978 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(18) | NFPA 80 | 1968 | Standard for Fire Doors and Windows | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 147.2250(b)(1) | UTUIC regulations | 1990 | Utah Pollution Control Act, Utah Code Annotated, Sections 26-11-1 through -20 (Supp. 1990) | State of Utah | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995 | 1967 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.010-3(a)(3) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.171(a)(1) | NHTSA Publication | 2011 | Parts List and Drawings, Part 572 Subpart T, Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.076-21(a) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 60.664(e)(4) | ASTM D1946 | 1994 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. C, 2.6.3.1(A) | AHAM DW-1 | 1992 | Household Electric Dishwashers | Association of Home Appliance Manufacturers | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table Note 4 | EPA Method 327.0 | 2005 | Determination of Chlorine Dioxide and Chlorite Ion in Drinking Water Using Lissamine Green B and Horseradish Peroxidase with Detection by Visible Spectrophotometry, Revision 1.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(7) | ASTM D975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5580 | ASME PTC 22 | 2014 | Gas Turbines: Performance Test Codes | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.9M | 1991 | Non-Vitreous Ceramic Plumbing Fixtures | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 563.5 Frontal Air Bag | FMVSS 208 | 2012 | Occupant Crash Protection | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (32) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 195.307(e) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute |