This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 440 Appendix A | ASTM C 549 | 1986 | Perlite Loose Fill Insulation | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | ASCE 7 | 1988 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Coast Guard | 46 CFR 111.01-9(a) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(3) | NHTSA Publication | 2008 | Procedures for Assembly, Disassembly and Inspection (PADI) of the EuroSID-2re 50th Percentile Adult Male Side Impact Crash Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) D4 | ASME B31.8 | 2004 | Gas Transmission and Distribution Piping Systems | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii) | EPA-600-R-94-111 | 1994 | Methods for the Determination of Metals in Environmental Samples, Supplement I | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 59.10-5(k) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 435.11(u) | EPA Method 1654 A | 1992 | PAH Content of Oil by HPLC/UV, Revision A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.585(e)(2) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Environmental Protection Agency | 40 CFR 60.106(j)(2) | ASTM D 2622 | 1998 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Grain Inspection, Packers and Stockyards Administration | 7 CFR 802.0(a) | NIST Handbook 105-1 | 1990 | Specifications and Tolerances for Field Standard Weights | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 147.300(a)(3) | COUIC regulations | 1989 | Rules and Regulations, Rules of Practice and Procedure, and Oil and Gas Conservation Act (As Amended) Department of Natural Resources, Oil and Gas Conservation Commission of the State of Colorado | State of Colorado | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3262 | 2011 | Standard Specification for, Fiberglass, (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe | ASTM International | |
Environmental Protection Agency | 40 CFR 63.4741(b)(1) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Coast Guard | 46 CFR 164.023-3(b)(1) | Federal Standard 191A | 1978 | Method 4010, Length-Weight Relation; Thread; Yards Per Pound (m/kg) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 134.140(a)(3) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(ii) | ANSI Z87.1 | 1968 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 5865 | 1998 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Food and Drug Administration | 21 CFR 184.1619(b) | Food Chemicals Codex | 1981 | Potassium Carbonate | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1316(b) | Food Chemicals Codex | 1981 | Ficin | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (13) | ASTM B 117 | 1979 | Standard Method of Salt Spray (Fog) Testing | ASTM International | |
Federal Communications Commission | 47 CFR 80.1101(c)(8) | IMO Resolution A.808(19) | 1995 | Performance Standards for Ship Earth Stations Capable of Two-Way Communications | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(11) | ASTM A 182/A 182M | 1997 | Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 208 | 1982 | Insulating Board (Cellulosic Fiber), Structural and Decorative | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.200(i) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Coast Guard | 46 CFR 10.107(b) STCW endorsement | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (53) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.522(k)(2)(vii) | Bellcore TR-TSY-000508 | 1987 | Automatic Message Accounting, Section 8.1, Issue 2 | Bell Communications Research | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | USGS R-1110-76 | 1977 | Cesium-137 and cesium-134, dissolved. Inorganic ion-exchange method-gamma counting | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.644(b)(3) | ASTM E 260 | 1996 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 14 CFR 25.5(b)(1) | DOT/FAA/AR-05/8 | 2008 | Fuel Tank Flammability Assessment Method User's Manual | Federal Aviation Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 173.65(b) | FDA Publication | 1989 | Determination of Divinylbenzene in Alcohol Extracts in Amerlite XAD-4 | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7380 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(6) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
Energy Department | 10 CFR 430.32(x)(1)(ii) | ANSI C81.61 | 2006 | Electrical Lamp Bases--Specifications for Bases (Caps) for Electric Lamps | American National Standards Institute | |
Energy Department | 10 CFR 431.95(b)(1) | ARI 210/240 | 2003 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(3)(i) | EPA-600-4-84-017 | 1984 | Method 300.0--The Determination of Inorganic Anions in Water by Ion Chromatography | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 199.05(b) | IMO MSC Circular 699 | 1995 | Revised Guidelines for Passenger Safety Instructions | International Maritime Organization | |
Food and Drug Administration | 21 CFR 178.3910(a)(4)(i)(C) | ASTM D 156 | 1982 | Standard Method of Test for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) | ASTM International | |
Coast Guard | 46 CFR 57.03-1(a)(1) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 282.88(d)(1)(i)(A) | PAUSTP | 2002 | Pennsylvania Statutory Requirements Applicable to the Underground Storage Tank Program | Commonwealth of Pennsylvania | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.4.1, d | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 162.017-1(c)(1) | ISO 15364 | 2000 | Ships and Marine Technology—Pressure/Vacuum Valves for Cargo Tanks, First Edition | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 3280.405(c) | NWWDA I.S. 4 | 1981 | Industry Standard for Water-Repellent Preservative Non-Pressure Treatment of Millwork | National Wood Window and Door Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | APHA Method 4110 C | 2000 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Consumer Product Safety Commission | 16 CFR 1631.4(b)(1)(ii) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 46 CFR 56.75-20(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.50-3(c) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association |