This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 1043.1(d) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Coast Guard | 46 CFR 147.90(a) | ASHRAE 34 | 1978 | Number Designations of Refrigerants | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(J) | EPA Method 627 | 1997 | The Determination of Dinitroaniline Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | ASTM D 3557D | 2002 | Cadmium in Water by Graphite Furnace Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(g)(4) | SAE J-1877 | 1994 | Recommended Practice for Bar-Coded Vehicle Identification Number Label | Society of Automotive Engineers | |
Coast Guard | 46 CFR 97.36-1(a) | ASTM Adjunct F1626 | 1996 | Symbols Used in Accordance with Regulation II-2/20 of the 1974 SOLAS Convention as amended PCN: 12-616260-01 | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2050(b)(4) | SCUIC regulations | 1976 | S.C. Code Ann. Sections 15-5-20, 15-5-200 (Law. Co-op. 1976 and Supp. 1983) | State of South Carolina | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(d) | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 63.404(a) | EPA SW-846 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.97(b)(6) | RUS Bulletin 345-66, PE-64 | 1979 | Specification for Subscriber Carrier Systems | Rural Utilities Service, U.S. Department of Agriculture | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.264(e)(4) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute | |
Federal Communications Commission | 47 CFR 80.1101(d)(2)(ii) | ITU-T Recommendation E.161 | 1993 | Arrangement of Digits, Letters and Symbols on Telephones and Other Devices that Can Be Used for Gaining Access to a Telephone Network for Gaining Access to a Telephone Network | International Telecommunication Union--Telecommunication | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(12) | ASME B56.1 | 1959 | Safety Standard for Powered Industrial Trucks | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.600(b) | UL 723 | 1994 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(2) | Drawing No. SA-SID-M010 | 1987 | Title not specified | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 505 | 2006 | Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operation | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 172.800(b)(1) | FDA Publication | 1949 | Acesulfame Potassium Assay | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE (1) | ASTM D 1943 | 1996 | Standard Test Method for Alpha Particle Radioactivity of Water | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.94(b)(3)(ix) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | ASTM D 3558C | 2008 | Cobalt by Graphite Furnace Atomic Absorption | ASTM International | |
Food and Drug Administration | 21 CFR 189.165(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Health and Human Services Department | 45 CFR 162.1102(b)(2)(iv) | ASC X12N 837 | 2000 | Health Care Claim: Institutional | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(79) | API RP 75 | 2008 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities, Third Edition | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(5) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Energy Department | 10 CFR 434.403.1 Table 403.1b | ARI 320 | 1993 | Water Source Heat Pumps (RS-27) | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (81) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Total Chlorine) | APHA Method 4500-Cl D | 2014 | Chlorine, Amperometric Titration | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I Division 1 and Division 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(16) | ASTM D 3084 | 1975 | Standard Practice for Alpha-Particle Spectrometry of Water | ASTM International | |
Rural Utilities Service | 7 CFR 1755.397(a)(5)(i) | Bellcore TR-TSY-000008 | 1987 | Digital Interface Between the ALC 96 Digital Loop Carrier System and a Local Digital Switch, Issue 2 | Bell Communications Research | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | APHA Method 4110 B | 2000 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Coast Guard | 46 CFR 15.103(g) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60.17(g)(202) | ASTM E 871 | 1982 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 5310 D | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(iii) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.161(a)(1) | LM Publication | 2009 | Parts List and Drawings, Part 572 Subpart S, Hybrid III 6-Year-Old Child Weighted Crash Test Dummy (H-III6CW) | Leet-Melbrook | |
Coast Guard | 46 CFR 160.048-1(a)(2) | FedSpec CCC-C-426D | 1970 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.18 | 2001 | Cast Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 855 | 2009 | Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 45 CFR 162.1802(b)(2)(i) | NCPDP Publication | 2006 | Batch Standard Batch Implementation Guide, Version 1, Release 2 | National Council for Prescription Drug Programs | |
Environmental Protection Agency | 40 CFR 63.14(k)(4) | DE State Regulations | 2000 | Letter of June 7, 1999, to the U.S. Environmental Protection Agency Region 3 from the Delaware Department of Natural Resources and Environmental Control | State of Delaware | |
Coast Guard | 46 CFR 58.10-5(b)(3)(i) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.156-5(b)(2) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes, | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(154) | ASTM D 4239 | 1997 | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods | ASTM International | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(i) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 739 | 1991 | Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xxv) | APHA Method 3500-Cr | 2009 | Chromium | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix E 2.10(11) | NBS Special Publication 506 | 1977 | Misidentification of asbestos in talc, pp. 339-353, in: Proceedings of Workshop on Asbestos: Definitions and Measurement Methods, National Measurement Laboratory | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 98.276(c) | TAPPI Method T650 | 2005 | Solids Content of Black Liquor | Technical Association of the Pulp and Paper Industry |