This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Rural Utilities Service | 7 CFR 1728.201(h)(1)(ii) | AWPA A5 | 2005 | Standard Methods for Analysis of Oil-Borne Preservatives | American Wood Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(7) | ANSI A14.1 | 1968 | Safety Code for Portable Wood Ladders | American National Standards Institute | |
Food and Drug Administration | 21 CFR 184.1426(b) | Food Chemicals Codex | 1981 | Magnesium Chloride | National Academy Press | |
Federal Railroad Administration | 49 CFR 227.103(c)(2)(iii) | ANSI S1.25 | 2002 | Specification for Personal Noise Dosimeters | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (6) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xlix) | ASTM D 4327 | 2003 | Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C3 | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Environmental Protection Agency | 40 CFR 72.2 Diesel fuel | ASTM D 2880 | 1990 | Standard Specification for Gas Turbine Fuel Oils | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.703 | ASTM B 88 | 1993 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | NEMA All Standards | 2013 | All specifications, standards, and codes without specific reference | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (75) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Parathion) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.2101(c)(1)(i) | SDHWMP | 2005 | EPA Approved South Dakota Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of South Dakota | |
Environmental Protection Agency | 40 CFR 75.59(d)(4)(iii) | ASTM D 7036 | 2004 | Standard Practice for Competence of Air Emission Testing Bodies | ASTM International | |
Interior Department | 43 CFR 11.36(b)(2) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Coast Guard | 33 CFR 154.812(b)(6) | IEC 309-2 | 1981 | Plugs, Socket-Outlets and Couplers for Industrial Purposes: Part 2, Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.3.10 | SAE J-211/1 | 1985 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(12) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM D 4099 | 1989 | Standard Specification for Poly Vinyl Chloride (PVC) Prime Windows/Sliding Glass Doors | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 572 | 1982 | High-Strength Low-Alloy Columbium-Vanadium Steels of Structural Quality | ASTM International | |
Housing and Urban Development Department | 24 CFR 100.201a(b)(2) | ICC/ANSI A117.1 | 1998 | American National Standard: Accessible and Usable Buildings and Facilities | International Code Council | |
Food and Drug Administration | 21 CFR 178.3770(a)(2) | ASTM D 1386 | 1978 | Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Research and Special Programs Administration | 21 CFR 177.1312(c)(2) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Carbaryl [Sevin]) | EPA Method 553 | 1992 | Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(18) | ASTM D 3953 | 1998 | Standard Specification for Strapping, Flat Steel and Seals | ASTM International | |
Food and Drug Administration | 21 CFR 172.869(b)(2) | MCC Publication | 1998 | Method for Measuring the Ester Distribution of Sucrose Oligoesters | Mitsubishi Chemical Corporation | |
Coast Guard | 46 CFR 10.107(b) Endorsement | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 162.161-2(d)(2) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | AOAC Method 974.27 | 1988 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Aluminum) | APHA Method 3111 B | 1995 | Metals by Flame Atomic Absorption | American Public Health Association | |
Consumer Product Safety Commission | 16 CFR 1505.5(h)(2) | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(d)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2) | NHTSA Publication | 2011 | Parts List and Drawings, Part 572 Subpart T, Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Hexachlorobenzene) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(c)(ii) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Environmental Protection Agency | 40 CFR 60.111(l) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(iii) | AASHTO Standard Specifications for Highway Bridges, 17th ed. | 2002 | Standard Specifications for Highway Bridges | American Association of State Highway and Transportation Officials | |
Mine Safety and Health Administration | 30 CFR 57.2 Blasting agent | 49 CFR 173.114(a) | 1979 | Blasting agent classifications | U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vii)(B) | ASTM A 621/A 621M | 1992 | Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Drawing Quality | ASTM International | |
Energy Department | 10 CFR 435.4(a)(2)(ii) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 434.404.1 Table 404.1 | ANSI Z21.10.3 | 1993 | Gas Water Heaters (RS-39) | American National Standards Institute | |
Coast Guard | 46 CFR 160.055-5(c)(1) | Drawing No. 160.055-1B, Sheet 4 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 67 | U.S. Coast Guard | |
Occupational Safety and Health Administration | 29 CFR 1917.93(b)(1)(iii) | ANSI/ISEA Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
National Highway Traffic Safety Administration | 49 CFR 571.209 S5.2(k) | SAE J-726 | 1979 | Recommended Practice, Air Cleaner Test Code | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(k)(2)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 21 CFR 172.320(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60.17(g)(121) | ASTM D 3177 | 1975 | Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke | ASTM International | |
Public Health Service | 42 CFR 37.10(b)(1) | AAPM On-Line Report No. 03 | 2005 | Assessment of Display Performance for Medical Imaging Systems | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 2D1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (30) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency |