This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 440 Appendix A | NFPA 211 | 1988 | Standard for Chimneys, Fireplaces and Vents | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(20) | SAE J-759 | 1995 | Lighting Identification Code | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (42) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 902.0 | 1980 | Radioactive Iodine, Report Number 600-4-80-032 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.4360 | ASTM D 4810 | 1999 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length of Stain Detector Tubes | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0024 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 245.1 | 1994 | Mercury by Cold Vapor Atomic Absorption, Revision 3.0 | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 154.106(f)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 59.412(b)(3) | ASTM D 1640 | 1983 | Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xxi)(A) | ASME B&PV Code | 1997 | Boiler and Pressure Vessel Code, Section XI, Table IWB-2500-1, Examination Category B-D, Full Penetration Welded Nozzles in Vessels, Items B3.40 and B3.60 and Items B3.120 and B3.140 1998 Ed, 1999 Addenda - latest edition and addenda, Table IWB-3512-1 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.57(g)(4)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 59.515(a)(3) | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | NFPA 1231 | 1993 | Water Supplies for Suburban and Rural Fire Fighting | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | EPA-821-B-01-009 | 2001 | Kelada-01, Kelada Automated Test Methods for Total Cyanide, Acid Dissociable Cyanide, and Thiocyanate, Revision 1.2 | U.S. Environmental Protection Agency | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 780.25(a)(2)(i) | USDA Technical Release 210-VI-TR60 | 2005 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture | |
Coast Guard | 21 CFR 172.167(d)(2) | HCC Publication | 1991 | Manual from the Hydrogen Peroxide Test Kit, Model HYP-1, Catalog Number 22917-00 | Hach Chemical Company | |
Research and Special Programs Administration | 49 CFR 195.3(c) E2 | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 90.7(b)(1) Table | ASTM D 86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 761.19(a)(3) | ASTM D 240 | 1987 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC A-16 | 1989 | Electric Navigation Lights | American Boat and Yacht Council | |
Coast Guard | 46 CFR 28.40(b) | SAE J-1942 | 1989 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 25 | HCC Method 8507 | 1979 | Nitrogen Nitrite--Low Range, Diazotization Method for Water and Wastewater | Hach Chemical Company | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(x) | APHA Method 2310 | 1997 | Acidity | American Public Health Association | |
Environmental Protection Agency | 40 CFR 436.31(c) | NOAA Atlas 2 | 1973 | NOAA Atlas 2 for the 11 Western States | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Environmental Protection Agency | 40 CFR 86.1(b)(17) | ASTM D 5186 | 2009 | Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography | ASTM International | |
Labor Department | 41 CFR 50-204.2(a)(3) | 49 CFR 179 | 2012 | Specifications for Tank Cars | U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 173.469(d)(1) | ISO 2919 | 1980 | Sealed Radioactive Sources--Classification | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME B16.15 | 1985 | Cast Bronze Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 306B, Section 6.2 | ASTM D 1331 | 1989 | Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. R, 3.3 | IES LM-20 | 1994 | Method for Photometric Measuring and Reporting Test on Reflector Type Lamps | Illuminating Engineering Society of North America | |
Coast Guard | 46 CFR 160.135-7(b)(7)(ii)(B) | ASTM B 127 | 2005 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip, (Reapproved 2009) | ASTM International | |
Environmental Protection Agency | 40 CFR 1037.610(c) | SAE J-1526 | 1987 | Joint TMC/SAE Fuel Consumption In-Service Test Procedure Type III | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 147.701(a)(2) | ILUIC regulations | 1977 | Illinois Environmental Protection Act, Illinois Revised Statutes ch. 1111/2, sections 1001-1051 (Smith-Hurd 1977 and Supp. 1983), as amended by Public Act No. 83-431, 1983 Illinois Legislative Services pages 2910 to 2916 (West) | State of Illinois | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 5, (1)(c) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.178(f)(1) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 178.3870(f)(6)(i) | FDA Publication | 1989 | Determination of Abietic Acid and Dehydroabietic Acid in Rosins | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (69) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.201(a) | DOT Publication | 2000 | Manual on Uniform Traffic Control Devices, Millennium Edition | U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.102(c)(1) | NFPA 51A | 2006 | Standard for Acetylene Cylinder Charging Plants | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 57.2 Explosives | 49 CFR 173.88 | 2013 | Explosives | U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.890(i)(7) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9978 | 1992 | Sealed Radioactive Sources--Leakage Test Methods | International Organization for Standardization / International Electrotechnical Commission | |
Occupational Safety and Health Administration | 29 CFR 1910.1001(f)(1)(iv) | ANSI Z9.2 | 1979 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | NFPA 17A | 1994 | Wet Chemical Extinguishing Systems | National Fire Protection Association | |
Consumer Product Safety Commission | 16 CFR 1630.62(a) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(iii) | Drawing No. 78051-44 | 1987 | Upper leg assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (78) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table Note 1 | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.4.2 | ASTM D 2459 | 1972 | Standard Test Method for Gamma Spectrometry of Water | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1040 | 1986 | Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines | Society of Automotive Engineers |