This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | NFPA 91 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (11) | ASTM D 1003 | 1992 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics | ASTM International | |
Energy Department | 10 CFR 434.403.1 Table 403.1c | ARI 550 | 1992 | Centrifugal and Rotary Screw Water-Chilling Packages (RS-30) | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | AOAC Method 993.30 | 1998 | Ortho-phosphate (as P), mg/L | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | ANSI K61.1 | 1972 | Standard for the Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NMAB 353-3 | 1980 | Classification of Combustible Dust in Accordance with the National Electrical Code | National Academy Press | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 28, Section 6.1 | UL 103 | 1986 | Standard for Chimneys, Factory-built, Residential Type and Building Heating Appliance, Sixth Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 24 CFR 200.925c(c)(2) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Research and Special Programs Administration | 46 CFR 111.33-5(a) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.200(i) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 1043.95(d) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 14.4.2 | International Maritime Organization | |
Coast Guard | 46 CFR 139.130(b)(3) | ANSI/ISO/ASQ Q9001-2000 | 2000 | Quality management systems—Requirements | American Society for Quality Control | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xxxi) | APHA Method 3500-Na | 1997 | Sodium | American Public Health Association | |
Coast Guard | 46 CFR 160.055-1(a)(4) | ASTM D 413 | 1993 | Standard Test Method for Rubber Property--Adhesion to Flexible Substrate | ASTM International | |
Coast Guard | 21 CFR 131.170(f) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 272.701(a)(1) | ILHWMP | 2013 | State of Illinois Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Illinois | |
Research and Special Programs Administration | 21 CFR 131.120(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Rural Utilities Service | 7 CFR 1755.860(m)(5) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (5) | APHA Method 4500-H+B | 2005 | pH Value by Electrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(a) Anthracite | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Bromacil; Bromacil Salts and Esters) | EPA Method 633 | 1993 | Organonitrogen Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 173.1(c) | ICAO Publication | 2005 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Coast Guard | 21 CFR 145.135(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(a)(3) | AGA Report No. 3, Part 1 | 1990 | Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines | American Gas Association | |
Food and Drug Administration | 21 CFR 131.130(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(16) | ASTM C 94/C 94M | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(g)(17) | SAE J-1962 | 2002 | Diagnostic Connector Equivalent to ISO/DIS 15031-3 | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 177.1480(b)(2) | FDA Publication | 2003 | Infrared Spectrophotometric Determination of Polymers Extracted from Borex 210 Resin Pellets | Food and Drug Administration, U.S. Department of Health and Human Services | |
Public Health Service | 42 CFR 37.10(f)(6) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 175.600(b) Table | ISO 8846 | 1990 | Small Craft-Electrical Devices-Protection Against Ignition of Surrounding Flammable Gases | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 3282.12(b)(3)(i)(C)(3) | ICBO Unform Plumbing Code | 2013 | Uniform Plumbing Code | International Conference of Building Officials | |
Environmental Protection Agency | 40 CFR 147.2200(b)(1)(i) | TXUIC regulations | 2001 | Vernon's Texas Codes Annotated, Water Code, Chapters 5, 7, 26, and 32, Health and Safety Code Section 361, Government Code (ORA) Chapter 552 and Government Code (APA) | State of Texas | |
Environmental Protection Agency | 40 CFR 63.457(b)(5)(i)(A) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(3) | ANSI A14.5 | 1992 | Safety Requirements for Portable Reinforced Plastic Ladders | American National Standards Institute | |
Coast Guard | 46 CFR 160.133-7(b)(8) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (93) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(2)(i) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (62) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(10) | ASTM D 1331 | 1989 | Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. C, 1.10 | AHAM DW-1 | 1992 | Household Electric Dishwashers | Association of Home Appliance Manufacturers | |
Food and Drug Administration | 21 CFR 177.1585(c)(3) | GE Publication | 1991 | Analytical Method for Determination of Residual Methylene Chloride in Polyestercarbonate Resin | General Electric Co. | |
Occupational Safety and Health Administration | 29 CFR 1910.268(s)(1)(v) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Free Chlorine) | APHA Method 4500-Cl G | 2000 | Residual Chlorine by Spectrophotometric, DPD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 115, 5(2) | EPA-520-1-89-009 | 1989 | Indoor Radon and Radon Decay Product Measurement Protocols | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.46b(g) | ASME PTC 4.1 | 1991 | Power Test Codes: Test Code for Steam Generating Units | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(54) | ASTM D 1266 | 1987 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Coast Guard | 46 CFR 160.047-4(b) | Drawing No. 160.047-1, Sheet 1, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child--Cutting Pattern and General Arrangement, Models AK-1, and AF-1 | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.76(a) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 16 | Reprographic Technologies | |
Energy Department | 10 CFR 434.403.2.9.2 Table 403.2.9.2 | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (RS-6) | ASTM International |