This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.100-20(a) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 199.40(c)(1) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-saving Appliances and Arrangements | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 173.192(a) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Coast Guard | 46 CFR 111.70-1(a) | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 161.002-1(b) | FM Class No. 3820 | 1979 | Electrical Utilization Equipment | Factory Mutual Engineering and Research | |
Research and Special Programs Administration | 46 CFR 111.30-5(a)(1) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Food and Drug Administration | 21 CFR 184.1259(b)(9) | AOCS Journal, Vol 52, p. 118-120 | 1975 | Rapid Quantitative Determination of Residual Hexane in Oils by Direct Gas Chromatography | American Oil Chemists Society | |
Environmental Protection Agency | 40 CFR 72.2 EPA Protocol Gas Production Site | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 434.701.1 RS-17 | ARI 310/380 | 1993 | Packaged Terminal Air-Conditioners and Heat Pumps (RS-17) | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.5.6 | ASHRAE 41.1 | 2001 | Standard Method for Temperature Measurement | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 162.050-4(d)(1) | UL 913 | 1976 | Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (15) | APHA Method 5220 C | 1997 | Chemical Oxygen Demand by Closed Reflux and Titration | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(lviii) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5089(h)(1)(i) | ASTM E 324 | 1999 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.12047 | NFPA 70 | 1968 | National Electrical Code, Part 2, Safety Rules for the Installation and Maintenance of Electric Supply and Communication Lines and Supplement 2 thereof issued March 1968 | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 272.651(c)(1) | IDHWMP | 2012 | State of Idaho Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Idaho | |
Consumer Product Safety Commission | 16 CFR 1201.7(b)(2) | ANSI Z97.1 | 1975 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Coast Guard | 46 CFR 64.2(b) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1 with Addenda Issued December 31, 1989 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(20) | ASTM D 129 | 1964 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.152(c)(3)(i) | Drawing No. 910420-003 | 1987 | Neck transducer mass simulator | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Pentachlorophenol) | EPA Method 515.1 | 1995 | Chlorinated acids Liquid/Liquid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart WW | WAHWMP | 2015 | State of Washington Hazardous Waste Management Program (Reserved) | State of Washington | |
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 6.1.2(d)(3) | ASTM D 7036 | 2004 | Standard Practice for Competence of Air Emission Testing Bodies | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 3(b) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 2633 | 1989 | Standard Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-558C | 1992 | Insulation Blocks, Boards, Blankets, Felts Sleeving (Pipe and Tub Coverings), and Pipe Fitting Covering, Thermal (Mineral Fiber, Insulation Type) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.055-3(c) | Standard Color Reference of America | 2014 | Indian Orange, Cable No. 70072 | Textile Color Association of the United States | |
Coast Guard | 46 CFR 111.01-15(c) | UL 489 | 2000 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 164.74(a)(3)(ii) | API 9A | 1984 | Specification for Wire Rope, Section 3, Properties and Tests for Wire and Wire Rope | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D 611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.926e(c) | ASCE 7 | 1988 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Food and Drug Administration | 21 CFR 299.4(d) | USAN and the USP Dictionary of Drug Names | 1985 | Guiding Principles for Coining U.S. Adopted Names for Drugs | U.S. Pharmacopeial Convention | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 11 | ASTM E 162 | 1998 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (23) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Chloride) | APHA Method 4110 B | 2000 | APHA Standards On-line, Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Coast Guard | 46 CFR 108.645(a)(4) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60.17(g)(77) | ASTM D 1946 | 1994 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.94(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (23) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Lindane) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.2145(s)(1)(ii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 55.14(d)(3)(i) | 40 CFR part 52, subpart C | 2006 | State of California Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(ix)(A) | AASHTO LRFDLTS-1-I1-OL | 2017 | Interim Revisions to LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Research and Special Programs Administration | 49 CFR 195.405(b) | API 2026 | 1998 | Safe Access/Egress Involving Floating Roofs of Storage Tanks in Petroleum Service | American Petroleum Institute | |
Coast Guard | 46 CFR 114.400(b), Critical radiant flux | ASTM E 648 | 1997 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 842 | 1990 | Standard Specification for Application of Interior Gypsum Plaster | ASTM International | |
Coast Guard | 46 CFR 58.50-10(a)(3) Table 58.50-10(a) | ASTM B 209 | 1996 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(23) | ASTM D 1692 | 1968 | Test for Flammability of Plastic Sheeting and Cellular Plastics | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11621 | 1997 | Gas cylinders--Procedures for change of gas service | International Organization for Standardization | |
Research and Special Programs Administration | 21 CFR 178.3910(a)(4)(i)(B) | ASTM D 1353 | 1978 | Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer and Related Products | ASTM International |