Environmental Protection Agency |
|
40 CFR 1043.70(a) |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 13
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG Footnote 3 |
EPA Method 627 |
1997 |
The Determination of Dinitroaniline Pesticides in Municipal and Industrial Wastewater
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (9) |
APHA Method 3111 C |
1999 |
Metals by Flame Atomic Absorption, Extraction and Direct Aspiration
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 98.354(c) |
EPA 833-B-96-003 |
1996 |
NPDES Permit Writers' Manual, Section 7.1.3, Sample Collection Methods
|
U.S. Environmental Protection Agency |
Consumer Product Safety Commission |
|
16 CFR 1505.5(h)(2) |
NFPA 70 |
1971 |
National Electrical Code
|
National Fire Protection Association |
Coast Guard |
|
46 CFR 164.018-11(d)(2) |
FedSpec CCC-C-443E |
1974 |
Cloth, Duck, Cotton (Single and Plied Filling Yarns, Flat)
|
Federal Specifications Standards and Test Methods |
Research and Special Programs Administration |
|
49 CFR 178.38(k)(3)(i) |
ASTM E8 |
1999 |
Standard Test Methods for Tension Testing of Metallic Materials
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63.11551(c)(1)(iii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
Coast Guard |
|
46 CFR 162.027-2(a) |
ASTM F1546 |
2012 |
Standard Specification for Firehose Nozzles
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
DOC All Standards |
2013 |
All specifications, standards and codes without specific reference
|
U.S. Department of Commerce |
Rural Utilities Service |
|
7 CFR 1755.910(d)(5)(vi)(C) |
ASTM A525 |
1991 |
Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.17(g)(130) |
ASTM D3270 |
1980 |
Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
|
ASTM International |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.1629(b)(1) |
API 510 |
2006 |
Pressure Vessel Inspection Code
|
American Petroleum Institute |
Rural Utilities Service |
|
7 CFR 1755.390(i)(5)(vi) |
ASTM A505 |
1987 |
Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled
|
ASTM International |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 178.273(b)(6)(i) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Food and Drug Administration |
|
21 CFR 573.640(b)(4)(ii) |
AOAC Official Methods |
1975 |
Official Methods of Analysis
|
AOAC International |
Coast Guard |
|
46 CFR 110.10-1(g)(30) |
IEC 60947-2 |
2003 |
Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition
|
International Electrotechnical Commission |
National Highway Traffic Safety Administration |
|
49 CFR 572.73(b) |
Drawing No. SA 106C 020 |
1997 |
Neck Assembly, Revision A
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IF (Ethanol) |
EPA Method 1666 |
1998 |
Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 147.1050(a)(3) |
MDUIC regulations |
1989 |
Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 02, promulgated and effective as of March 1, 1989
|
State of Maryland |
Occupational Safety and Health Administration |
|
29 CFR 1926.1433(a) |
ANSI B30.5 |
1968 |
Safety Code for Crawler, Locomotive and Truck Cranes
|
American National Standards Institute |
Labor Department |
|
41 CFR 50-204.75 |
49 CFR 174 |
2014 |
Carriage by Rail
|
U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (92) |
EPA Method 625 |
1982 |
Base/Neutrals and Acids by GC/MS
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
EPA Method 317.0 |
2001 |
Determination of Inorganic Oxyhalide Disinfection By-products in Drinking Water Using Ion Chromatography With the Addition of a Postcolumn Reagent for Trace Bromate Analysis
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 63.14(g)(27) |
ASTM D2879 |
1996 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
Coast Guard |
|
46 CFR 160.176-8(a)(6)(ii) |
ASTM B117 |
1997 |
Standard Practice for Operating Salt Spray (Fog) Apparatus
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.17(g)(87) |
ASTM D2234 |
1997 |
Standard Practice for Collection of a Gross Sample of Coal
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.150(a)(1)(ii) |
Drawing No. 921022-041 |
2001 |
Neck Assembly
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 60.41c Natural gas (2) |
ASTM D1835 |
2003 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 62.16015(e)(2)(i) |
ASTM D6784-02 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
Surface Mining Reclamation and Enforcement Office |
|
30 CFR 870.19 Table 2 |
ASTM D5192 |
1991 |
Standard Practice for Collection of Coal Samples from Core
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 3285.905(a) |
NFPA 31 |
2001 |
Standard for the Installation of Oil-Burning Equipment
|
National Fire Protection Association |
Environmental Protection Agency |
|
40 CFR 52, Subpart EE |
NHSIP |
1979 |
State Implementation Plan with Regulatory and Nonregulatory Revisions
|
State of New Hampshire |
Coast Guard |
|
33 CFR 157.12(b)(2) |
IMO MPEC Resolution MEPC.108(49) |
2003 |
Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 261, Appendix IX, Tables 1 and 2 |
EPA Method 1320 |
1986 |
Multiple Extraction Procedure
|
U.S. Environmental Protection Agency |
Research and Special Programs Administration |
|
49 CFR 179.400-5(a) |
ASTM A240/A 240M |
1999 |
Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63.14(g)(15) |
ASTM D1946 |
1977 |
Standard Test Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 444.12(b)(1) |
EPA-600-R-94-111 |
1994 |
Methods for Determination of Metals in Environmental Samples—Supplement I
|
U.S. Environmental Protection Agency |
Occupational Safety and Health Administration |
|
29 CFR 1910.94(a)(2)(iii) |
NFPA 91 |
1961 |
Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying
|
National Fire Protection Association |
Coast Guard |
|
46 CFR 56.30-5(c)(3) |
ASME B16.11 |
2001 |
Forged Fittings, Socket-Welding and Threaded
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (62) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (24) Sodium |
ASTM D6919 |
2003 |
Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 3280.405(e)(2) |
AAMA 1702.2 |
1995 |
Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing
|
American Architectural Manufacturers Association |
Coast Guard |
|
46 CFR 160.151-21(v) |
IMO LSA Code |
2010 |
Life-Saving Appliances, including LSA Code
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IA Footnote 16 |
Colilert® Method |
2013 |
Colilert Test Kit
|
IDEXX Laboratories |
Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(lxi) |
APHA Method 6440 |
2000 |
Polynuclear Aromatic Hydrocarbons
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C5 |
ASTM E1193 |
1997 |
Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests
|
ASTM International |
Food and Drug Administration |
|
21 CFR 131.206(e)(3) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Interior Department |
|
43 CFR 11.36(b)(8) |
DOI NRDAM/GLE |
1999 |
CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation
|
U.S. Department of the Interior |
Environmental Protection Agency |
|
40 CFR 266.111(d)(2) |
NFPA 30 |
1981 |
Flammable and Combustible Liquids Code
|
National Fire Protection Association |