DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 165 | 1993 | Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (45) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 3125 | 2009 | Metals by Inductively Coupled Plasma/Mass Spectrometry | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4414(a)(1)(i) | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME B16.26 | 1988 | Cast Copper Alloy Fittings for Flared Copper Tubes | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 52, Subpart E | ARSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Arkansas | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (27) | APHA Method 2340 C | 1998 | Hardness by EDTA Titration | American Public Health Association | |
Environmental Protection Agency | 40 CFR 89.6(a)(7) | ASTM D 1319 | 1998 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDD, Table 4, (7) | NCASI Method CI/WP-98.01 | 1998 | Chilled Impinger Method For Use At Wood Products Mills to Measure Formaldehyde, Methanol, and Phenol | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-1972/2 | 1985 | Polyurethane or Polyisocyanurate Insulation Board Faced with Felt on Both Sides | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.052-5(c) | Drawing No. 160.052-1, Sheet 4 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Insert Patterns | U.S. Coast Guard | |
Federal Communications Commission | 47 CFR 80.1101(b) | 47 CFR 80.1061 | 2011 | Special requirements for 406.0-406.1 MHz EPIRB stations | Federal Communications Commission | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(iv) | SAE J-396 | 1974 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Animal and Plant Health Inspection Service | 21 CFR 165.110(b)(4)(iii)(I)(6)(vi) | APHA Method 4500-Cl I | 1995 | Chlorine, Iodometric Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(73) | ASTM D 1945 | 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (38) | Waters Method D6508, Revision 2 | 2000 | Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | Waters Corp. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(10) | NFPA 54 | 1969 | Standard for the Installation of Gas Appliances and Gas Piping | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F D | 1995 | Fluoride by SPADNS Method | American Public Health Association | |
Food and Drug Administration | 21 CFR 189.180(c) | AOAC Journal | 1971 | Gas Chromatographic Determination of Safrole and Related in Nonalcoholic Beverages: Collaborative, Vol. 54, No. 4, pages 900-902 | AOAC International | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 3 | ASTM E 1537 | 1999 | Standard Test Method for Fire Testing of Upholstered Seating Furniture | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 92041-005 | 1992 | Threaded Pin | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(2)(iii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1043.1(b) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(H) | EPA Method 622 | 1993 | Organophosphorus Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | APHA Method 3500-Cd D | 1990 | Cadmium by Colorimetric Method | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(2) | ANSI Z41 | 1991 | Protective Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 86.1(g)(2) | SAE J-1349 | 2011 | Engine Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.2 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.2050(b)(2) | SCUIC regulations | 1976 | State Safe Drinking Water Act, S.C. Code Ann. Sections 44-55-10 to 44-55-100 (Law. Co-op. 1976 and Supp. 1983). | State of South Carolina | |
Environmental Protection Agency | 40 CFR 63.404(a) | APHA Method 3500-Cr D | 1992 | Chromium by Colorimetric Method | American Public Health Association | |
Rural Utilities Service | 7 CFR 1755.522(a)(4) | ASTM B 33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
Coast Guard | 46 CFR 164.023-11(b)(1) | Federal Standard 191A | 1978 | Method 4010, Length-Weight Relation; Thread; Yards Per Pound (m/kg) | Federal Specifications Standards and Test Methods | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 176.720 | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.2.2 | UL 896 | 1973 | Oil-Burning Stoves | Underwriters Laboratories, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-1 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 1: Hoop-wrapped composite gas cylinders | International Organization for Standardization | |
Coast Guard | 46 CFR 175.600(b) Table | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(3) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Coast Guard | 40 CFR 136.3(a) Table IA | APHA Method 9222 B | 1997 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 261.22(a)(1) | EPA Method 9040C | 2004 | pH Electrometric Measurement | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75.6(a)(3) | ASTM D 287 | 1992 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 10 | EPA-821-R-93-010B | 1993 | Methods for the Determination of Nonconventional Pesticides in Municipal and Industrial Wastewater, Volume II | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.944(b) | APA PRP-108 | 1988 | Performance Standards and Policies for Structural Use Panels | APA--The Engineered Wood Association | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(viii) | ISO 1183-1:2004(E) | 2004 | Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition | International Organization for Standardization | |
Public Health Service | 42 CFR 52b.12(c)(3) | ICBO Code | 1997 | Uniform Building Code | International Conference of Building Officials | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i) | ANSI H38.7 | 1969 | Specification for Aluminum Alloy Seamless Pipe and Seamless Extruded Tube | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (81) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Free Chlorine) | APHA Method 4500-Cl G | 2014 | Residual Chlorine by Spectrophotometric, DPD | American Public Health Association | |
Coast Guard | 46 CFR 160.115-5(b)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization |