This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI B Kit | 2003 | Chlorine Institute Emergency Kit "B" for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks) | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | FedSpec RR-C-901D | 2003 | Cylinders, Compressed Gas: High Pressure, Steel DOT 3AA, and Aluminum Applications | Federal Specifications Standards and Test Methods | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AFTO 11A-1-47 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 2919 | 1980 | Sealed Radioactive Sources--Classification | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9978 | 1992 | Sealed Radioactive Sources--Leakage Test Methods | International Organization for Standardization / International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 3574 | 1986 | Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-11 | 2001 | Recommended Practice for Inspection of Compressed Gas Cylinders at Time of Manufacture | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 370 | 1994 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASME B31.4 | 1998 | Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1709 | 2001 | Standard Test Method for Impact Resistance of Plastic Film by the Free-Falling Dart Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H50155 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DLAR 8220.1 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 3807-2 | 2000 | Cylinders for acetylene--Basic requirements--Part 2: Cylinders with fusible plugs | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 8115 | 1986 | Cotton Bale--Dimensions and Density | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9809-3 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASHRAE 15 | 1994 | Safety Code for Mechanical Refrigeration | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11117 | 1998 | Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM E 112 | 1988 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 242 | 1981 | Standard Specification for High-Strength Low-Alloy Structural Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2004 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1835 | 1997 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H51970 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DOE CAPE–1662 | 1988 | Civilian Application Program Engineering Drawings, Revision 1 and Supplement 1 | U.S. Department of Energy | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | IAEA TS-R-1 | 1996 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 4126-1 | 1991 | Safety Valves | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-5 | 1995 | Cylinder Service Life-Seamless Steel High Pressure Cylinders | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 537/A 537M | 1991 | Standard for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | TTMA TB No. 107 | 1998 | Procedure for Testing In-Service Unmarked and/or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole Covers. | Truck Trailer Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 333 | 1967 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1838 | 1964 | Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Pamphlet 57 | 2003 | Emergency Shut-Off Systems for Bulk Transfer of Chlorine | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DOE SP–9 | 1968 | Fire Resistant Phenolic Foam, Revision 1 and Supplement | U.S. Department of Energy | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 515/A 515M | 2003 | Standard Specification for Carbon Steel Plates for Pressure Vessels for Intermediate and Higher Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-13 | 2000 | Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 262 | 1993 | Standard Practice for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11118 | 1999 | Gas cylinders--Non-refillable metallic gas cylinders--Specification and test methods | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11623 | 2002 | Transportable gas cylinders--Periodic inspection and testing of composite gas cylinders | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 441 | 1981 | High-Strength Low-Alloy Structural Manganese Vanadium Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ANSI N14.1 | 2001 | Uranium Hexafluoride--Packaging for Transport | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1922 | 2000 | Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Pamphlet 166 | 2002 | Section 3, Angle Valve Guidelines for Chlorine Bulk Transportation | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 6406 | 2005 | Gas Cylinders--Seamless Steel Gas Cylinders--Periodic Inspection and Testing | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.2 | 1996 | Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10297 | 1999 | Gas cylinders--Refillable gas cylinder valves--Specification and type testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 514 | 1981 | High-Yield Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Publication | 1988 | AAR Specifications for Design, Fabrication and Construction of Freight Cars, Volume 1 | Association of American Railroads |