This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Coast Guard | 33 CFR 164.74(a)(3)(ii) | API 9A | 1984 | Specification for Wire Rope, Section 3, Properties and Tests for Wire and Wire Rope | American Petroleum Institute | |
Research and Special Programs Administration | 30 CFR 250.198(h)(72) | ANSI/API Spec. 6D | 2009 | Specification for Pipeline Valves, Twenty-third Edition, Errata 1, June 2008; Errata 2, November 2008; Errata 3, February 2009; Addendum 1, October 2009; Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B3 | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(53) | API RP 2SM | 2007 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(25) | API MPMS | 2006 | Chapter 8, Section 1 | American Petroleum Institute | |
Coast Guard | 46 CFR 58.03-1(e)(2) | API RP 53 | 1984 | Recommended Practice for Blowout Prevention Equipment for Drilling Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(4) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(68) | API RP 14E | 1991 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(9) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures; Third Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.470 (g) | API RP 2N | 2021 | Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(i) | API MPMS | 2002 | Chapter 4, Section 8 | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.132(b)(3) | API 650 | 1998 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(4) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(63) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(21) | API MPMS | 2007 | Chapter 6, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(20) | API MPMS | 2005 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(84) | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.820 | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(34) | API MPMS | 1980 | Chapter 11.1, Volume 1, Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Gravity at 60 °F, API Standard 2540 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(g)(4) | API MPMS | 2013 | Chapter 12, Section 2, Part 4 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1629(b)(3) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.415(e) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.264(e)(1) | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Coast Guard | 46 CFR 39.1005(c)(1) | API 2000 | 1987 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(16) | API MPMS | 2005 | Chapter 5, Section 1 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1007(a)(4)(i)(D) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 505 | 2018 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(36) | API MPMS | 2008 | Chapter 10—Sediment and Water, Section 3—Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(37) | API MPMS | 1999 | Chapter 10—Sediment and Water, Section 4—Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure) | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 63.14(d)(3) | API MPMS | 1997 | Evaporative Loss From Floating-Roof Tanks, First Edition, Chapter 19.2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(c)(3) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 63.1064(b)(2) | API MPMS | 2015 | Air Concentration Test Method for the Measurement of Rim Seal Loss Factors for Floating-Roof Tanks, Chapter 19, Section 3, Part B | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.802(e)(4)(i) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(20) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 192.145(a) | API 6D | 2002 | Specification for Pipeline Valves | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(e) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(8) | API 2000 | 1968 | Venting Atmospheric and Low Pressure Storage Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(53) | API MPMS | 1993 | Chapter 20—Section 1—Allocation Measurement, | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(a)(3) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Interior Department | 88 FR 57334 | 30 CFR 250 | API RP 17H | 2019 | Oil and Gas and Sulfur Operations in the Outer Continental Shelf-Blowout Preventer Systems and Well Control Revisions | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.1004(b)(9) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1900(a) | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.1101 Maximum true vapor pressure (1) | API 2517 | 1980 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.803(b)(9)(v) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(5) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 192.225(a) | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(54) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(26) | API MPMS | 2005 | Chapter 8, Section 2 | American Petroleum Institute |