This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 352/A 352M | 1998 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure Containing Parts, Suitable for Low-Temperature Service | ASTM International | |
Coast Guard | 10 CFR 430.2, Definitions, BP incandescent reflector lamp (1) | ANSI C79.1 | 1994 | Nomenclature for Glass Bulbs Intended for Use with Electric Lamps | American National Standards Institute | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E 168 | 1992 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 160.002-4(b) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.176-13(y)(4) | ASTM D 751A | 1965 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 160.052-5(b) | Drawing No. 160.052-1, Sheet 1 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model AP | U.S. Coast Guard | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 56.01-2(k)(5) | MSS SP-45 | 2003 | Bypass and Drain Connections | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 160.061-3(a) | MIL-P-3412 | 1961 | Ethyl Cellulose | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.048-1(a)(2) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 177.410(c)(2) | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 108.649(b) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 160.115-5(b)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 164.018-11(b)(2) | Federal Test Method Standard 141 | 1974 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling, and Testing, Method 6142, Scrub Resistance | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 136.3(a) Table IB (30) | ASTM D 1068D | 2003 | Standard Test Methods for Iron in Water, Photometric Bathophenanthroline mg/L | ASTM International | |
Coast Guard | 46 CFR 160.174-3(b) | ASTM D 1518 | 1990 | Standard Test Method for Thermal Transmittance of Textile Materials | ASTM International | |
Coast Guard | 46 CFR 160.135-5(b)(6) | ASTM B 127 | 2005 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip, (Reapproved 2009) | ASTM International | |
Coast Guard | 46 CFR 160.151-21(c) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 153.4(b) | ANSI B16.31 | 1971 | Non-Ferrous Pipe Flanges | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-5(d)(6) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(b)(9) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 46 CFR 110.10-1(i)(1) | ISA RP 12.6 | 1995 | Wiring Practices for Hazardous (Classified) Locations Instrumentation Part I: Intrinsic Safety | International Society for Measurement and Control | |
Coast Guard | 33 CFR 183.5(b) | UL 1426 | 1987 | Cables for Boats | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 154, Appendix B, 3.3.1 | ASME B&PV Code | 2005 | Section VIII, Division 1, Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 177.300(b)(1) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 160.156-15(e)(1)(vi) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 111.30-5(a)(2) | IEC 92-503 | 1975 | Electrical installations in ships, Part 503: Special features: A.C. supply systems with voltages in the range of above 1kV up to and including 11kV, First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.01-2(d)(8) | ASME B16.9 | 2003 | Factory-Made Wrought Steel Buttwelding Fittings | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 102.23(c)(7) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.055-1(a)(1) | MIL-W-17337D | 1998 | Webbing, Woven, Nylon | U.S. Department of Defense | |
Coast Guard | 46 CFR 162.050-20(a)(1) | ISO 8217 | 2005 | Petroleum products—Fuels (class F)—Specifications of marine fuels | International Organization for Standardization | |
Coast Guard | 46 CFR 111.54-1(c)(3)(ii) | IEC 62271-100 | 2003 | High-voltage switchgear and controlgear—part 100: High-voltage alternating current circuitbreakers, Edition 1.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 161.002-4(b)(1) | UL 521 | 1993 | Heat Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM D 751 | 1997 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 160.051-7(d) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(b)(9) | ASTM D 2471 | 1999 | Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins | ASTM International | |
Coast Guard | 46 CFR 15.103(e) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 160.174-3(b) | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Coast Guard | 33 CFR 157.430(a) | IMO Resolution A.744(18) | 1993 | Guidelines on the Enhanced Program of Inspections During Surveys of Bulk Carriers and Oil Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(3)(i) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 21 CFR 1.24(a)(6)(ii) | NIST Handbook 44 | 2010 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 33 CFR 183.440(a) | SAE J-557 | 1968 | High Tension Ignition Cable | Society of Automotive Engineers | |
Coast Guard | 46 CFR 181.320(b)(1) | UL 19 | 1992 | Lined Fire Hose and Hose Assemblies | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.25-20(a) | ASME B16.5 | 2003 | Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 116.300(a)(1) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 97.15-55(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 52.01-140(d) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 3 | ASME SA-675 | 1998 | Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 27.102(b) | NFPA 750 | 2003 | Standard on Water Mist Fire Protection Systems | National Fire Protection Association | |
Coast Guard | 40 CFR 444.12(b)(1) Table (11) | USGS I-3900-85 | 1985 | Zinc by Flame Atomic Absorption | U.S. Geological Survey |