DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(vi) | ISO 62:2008(E) | 2008 | Plastics—Determination of water absorption, Third Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 111.60-3(a)(2) | UL 1309 | 1995 | Standard for Marine Shipboard Cable | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 161.006-1(a)(1) | NSSC 42S5 | 0 | Screws, machine, cap and set, and nuts | Navy Supply Systems Command | |
Coast Guard | 33 CFR 183.516(a)(1)(ii) | ASTM D 471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Coast Guard | 33 CFR 127.201(c)(1) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 334/A 334M | 1996 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (38) | AOAC Method 993.30 | 1998 | Nitrate (as N), mg/L | AOAC International | |
Coast Guard | 46 CFR 175.600(b) Table | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 54.20-3(d) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 113.30-25(j)(2) | IEC 60331-21 | 1999 | Tests for Electric Cables Under Fire Conditions—Circuit Integrity—Part 21: Procedures and Requirements—Cables of Rated Voltage up to and Including 0.6/1.0kV, First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 114.400(b), Flashpoint | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 39.5001(c) | OCIMF Publication | 2006 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.22 | 2001 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 120.340(o) | NFPA 70 | 1987 | National Electrical Code (NEC) Section 310-15 | National Fire Protection Association | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 63.05-1(g)(4) | UL 1453 | 1995 | Standard for Electric Booster and Commercial Storage Tank Water Heaters, Fourth Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 36 CFR 1237.3(e)(1) | ISO 18902 | 2001 | Imaging Materials--Photographic Processed Films, Plates, and Papers--Filing Enclosures and Storage Containers | International Organization for Standardization | |
Coast Guard | 46 CFR 153.4(b) | ANSI B16.24 | 1979 | Bronze Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American National Standards Institute | |
Coast Guard | 46 CFR 199.40(c)(1) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 7 CFR 1755.509(b) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(d)(27) | ASME B36.19M | 2004 | Stainless Steel Pipe | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 52.01-50(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 54.10-5(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.60-23(f) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 46 CFR 28.40(b) | ABYC H-2 | 1989 | Ventilation of Boats Using Gasoline | American Boat and Yacht Council | |
Coast Guard | 33 CFR 156.330(b) | OCIMF Publication | 1988 | Ship to Ship Transfer Guide (Petroleum) | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 110.10-1(g)(5) | IEC 60332-3-22 | 2000 | Tests on Electric Cables Under Fire Conditions—Part 3-22: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables—Category A, First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 12.25-45 | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 1003.0 | 2002 | Green Alga, Selenastrum capricornutum, Growth Test Method | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60.111a(b) Petroleum liquids | ASTM D 396 | 1996 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 110.10-1(o)(16) | UL 1581 | 1991 | Reference Standard for Electrical Wires, Cables, and Flexible Cords | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 114.600(b) | NFPA 1963 | 1993 | Fire Hose Connections | National Fire Protection Association | |
Coast Guard | 46 CFR 133.70(b)(3)(ii) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 108.646(a) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 160.002-3(g) | DWG No. F-49-6-1 (Sheet 1) | 0 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E 168 | 1992 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 160.176-13(y)(4) | ASTM D 751A | 1965 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 160.052-3(d)(2) | MIL-W-530F | 0 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Coast Guard | 46 CFR 58.01-10(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 56.01-2(k)(5) | MSS SP-45 | 2003 | Bypass and Drain Connections | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 160.060-5(e) | Federal Standard 751A | 0 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 54.05-5(b) | ASTM E 208 | 1995 | Standard Test Method for Conducting Drop-Weight Test to Determine Ni-Ductility Transition Temperature of Ferric Steels | ASTM International | |
Coast Guard | 46 CFR 160.031-1(a)(1) | FedSpec T-R-605B | 1963 | Rope, Manila, and Sisal with 1973 Amendment 3 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 177.410(c)(2) | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.115-5(b)(1) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 1004.0 | 2002 | Sheepshead Minnow, Cryprinodon variegatus, Larval Survival and Growth Test Method | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.018-5(a)(1) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 108.649(b) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IB (30) | ASTM D 1068D | 2003 | Standard Test Methods for Iron in Water, Photometric Bathophenanthroline mg/L | ASTM International |