This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME B16.29 | 1986 | Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings--DWV | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.3981, Subpart MMMM, Appendix A, Section 3.4 | ASTM D 6053 | 2000 | Standard Test Method for Determination of Volatile Organic Compounds (VOC) Content of Electrical Insulating Varnishes | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(40) | API MPMS | 2006 | Chapter 14, Section 3, Part 2 | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 184.1387(b) | Food Chemicals Codex | 1981 | Lactase enzyme preparation from Candida pseudotropicalis | International Telegraph and Telephone Consultative Committee | |
Federal Motor Carrier Safety Administration | 49 CFR 393.40(f)(2) | FMVSS 105 | 1998 | Hydraulic and Electric Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (2) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.420(c)(2) Table Note 7 | APHA Method 9222 G | 1998 | Membrane Filtration Qualitative (LES Endo): Total Coliform | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(m)(1) | ISO 6978-1:2003(E) | 2003 | Natural Gas—Determination of Mercury—Part 1: Sampling of Mercury by Chemisorption on Iodine, First edition | International Organization for Standardization | |
Coast Guard | 46 CFR 56.30-10(b)(5) | ASME B16.5 | 2003 | Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 739 | 1991 | Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 60.335(b)(9)(i) | ASTM D 5762 | 2002 | Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence | ASTM International | |
Food and Drug Administration | 21 CFR 184.1724(b) | Food Chemicals Codex | 1981 | Sodium Alginate | National Academy Press | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (74) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (trans-Dichloroethylene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(ii) | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Minerals Management Service | 30 CFR 250.114(c) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 164.018-11(d)(1) | MIL-R-21607D | 1976 | Resins, Polyester, Low Pressure Laminating, Fire-Retardant | U.S. Department of Defense | |
Rural Utilities Service | 7 CFR 1755.902(b)(8) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.602(b)(3)(ii) | ICAO Publication | 2005 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Coast Guard | 46 CFR 199.175(b)(15) | IMO Resolution A.657(16) | 1989 | Instructions for Action in Survival Craft | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACCA Manual J | 1986 | Load Calculation for Residential Winter and Summer Air Conditioning | Air Conditioning Contractors of America | |
Environmental Protection Agency | 40 CFR 89.6(c)(1) | SAE J-244 | 1983 | Recommend Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(a)(6) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 72.2 Fuel oil | ASTM D 396 | 1990 | Standard Specification for Fuel Oils | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-46 | ARI 560 | 1992 | Absorption Water-Chilling and Water Heating Packages (RS-46) | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 162.060-5(c)(1) | ISO/IEC 17025:2005(E) | 2005 | General Requirements for the Competence of Calibration and Testing Laboratories, Second Edition | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (16) | USGS I-2057-90 | 1990 | Anions, ion-exchange chromatographic, automated | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(lxv) | ASTM D 7237 | 2010 | Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 1719 | 1997 | Standard Test Method for Vapor Pressure of Liquids by Ebulliometry | ASTM International | |
Food and Drug Administration | 21 CFR 131.147(d)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | AWS D1.1 | 1990 | Structural Welding Code--Steel | American Welding Society | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 4 | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(177) | ASTM D 6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.6, b | ARI 210/240 | 2006 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.155(b) | Part No. 921022-000 | 2001 | Parts List and Drawings, Subpart R, CRABI 12-Month-Old Infant Crash Test Dummy (CRABI-12, Alpha version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Permethrin) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 278.3(b)(1) | EPA SW-846 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | API MPMS | 1993 | Chapter 4, Section 3 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 79.56(e)(3)(i)(A)(4) | ASTM D 4814 | 1993 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D 4057 | 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Coast Guard | 46 CFR 116.423(a)(3) | NFPA 701 | 1996 | Fire Tests for Flame-Resistant Textiles and Films | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 52, Subpart T | LASIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Louisiana | |
Coast Guard | 46 CFR 160.055-3(h) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 111.01-9(b) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) D2 | ASME B16.5 | 2004 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM B 127 | 1998 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip | ASTM International | |
Environmental Protection Agency | 40 CFR 194.5(a)(4) | ASME NQA-3 | 1989 | Quality Assurance Program Requirements for the Collection of Scientific and Technical Information for Site Characterization of High-Level Nuclear Waste Repositories | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-S-1657 | 1970 | Sealing Compound, Single Component Butyl Rubber Base, Solvent Release Type (for Buildings and Other Types of Construction) | Federal Specifications Standards and Test Methods | |
Food and Drug Administration | 21 CFR 610.12(f) | The United States Pharmacopeia | 1995 | United States Pharmacopeia | U.S. Pharmacopeial Convention | |
National Highway Traffic Safety Administration | 49 CFR 525.7(e)(1) | SAE J-1100 | 1975 | Motor Vehicle Dimensions | Society of Automotive Engineers |