This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 111.50-3(e) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 46 CFR 161.010-4(c)(4) | UL 1196 | 1987 | Standard for Floating Waterlights | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 164.120-5(b)(8) | ASTM D 1824 | 2002 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates | ASTM International | |
Coast Guard | 14 CFR 34.60(h) | ICAO Annex 16 | 2008 | Environmental Protection, Volume II, Aircraft Engine Emissions, Third Edition, Appendices 2, 3, 4, 5 and 6 | International Civil Aviation Organization | |
Coast Guard | 40 CFR 136.3(a) Table IG (Endrin) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 157.450 | IMO Resolution A.601(15) | 1987 | Provision and Display of Maneuvering Information on Board Ships | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iv) | ASTM D 695 | 2008 | Standard Test Method for Compressive Properties of Rigid Plastics | ASTM International | |
Coast Guard | 27 CFR 21.32(a) | National Formulary | 1980 | Formula No. 1 | U.S. Pharmacopeial Convention | |
Coast Guard | 33 CFR 183.430(a)(2)(i) | SAE J-378 | 1984 | Marine Engine Wiring | Society of Automotive Engineers | |
Coast Guard | 46 CFR 180.10 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 56.25-7 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 45 CFR 162.920(c)(4)(vi) | CAQH Publication | 2012 | Phase III CORE 350 Health Care Claim Payment/Advice (835) Infrastructure Rule, version 3.0.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 46 CFR 97.01-2(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 52.01-140(b)(3) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 2 | ASME SA-675 | 1998 | Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties 1998 DHS/USCG | American Society of Mechanical Engineers | |
Coast Guard | 27 CFR 21.76(a) | National Formulary | 1980 | Formula No. 40-B | U.S. Pharmacopeial Convention | |
Coast Guard | 40 CFR 444.12(b)(1) Table (11) | APHA Method 3500-Zn E | 1995 | Zinc by Dithizone Method II | American Public Health Association | |
Coast Guard | 46 CFR 80.20(a) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 24 CFR 200.925c(c)(2) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1123 | 1993 | Standard Specification for Non-Metallic Expansion Joints | ASTM International | |
Coast Guard | 46 CFR 170.015(b)(1) | ASTM F 1196 | 2000 | Standard Specification for Sliding Watertight Door Assemblies | ASTM International | |
Coast Guard | 33 CFR 154, Appendix C, 2.3.1 | ASTM F 715 | 1995 | Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage | ASTM International | |
Coast Guard | 46 CFR 56.15-1(c)(2)(i) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 54.30-5(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 161.002-4(b)(1) | IEC 533 | 1977 | Electromagnetic Compatibility of Electrical and Electronic Installations in Ships | International Electrotechnical Commission | |
Coast Guard | 46 CFR 110.10-1(n)(2) | MIL-HDBK-299(SH) | 1989 | Military Handbook Cable Comparison Handbook Data Pertaining to Electric Shipboard Cable Notice 1-1991 (Revision of MIL-HDBK-299(SH)) | Naval Sea Systems Command | |
Coast Guard | 46 CFR 125.180(b) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 33 CFR 154, Appendix A, 3.2 | ANSI B16.5 | 1979 | Pipe Flanges and Flanged Fittings | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | UL 1572 | 1995 | High Intensity Discharge Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 148.5(a) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 160.005-3(g) | Drawing No. 160.005-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 34.30-1 | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.048-4(e) | Drawing No. 160.048-1 | 2012 | Buoyant Cushion, Fibrous Glass | U.S. Coast Guard | |
Coast Guard | 33 CFR 183.540(a) | SAE J-1527 | 1985 | Marine Fuel Hoses | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.055-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5650 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 164.018-11(a) | FedSpec L-S-300 | 1974 | Sheeting and Tape Reflective: Nonexposed Lens, Adhesive Backing | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.01-2(e)(50) | ASTM B 85 | 1996 | Standard Specification for Aluminum-Alloy Die Castings | ASTM International | |
Coast Guard | 46 CFR 182.130 | ABYC H-32 | 1987 | Ventilation of Boats Using Diesel Fuel | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-15(e) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.052-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 111.70-1(a) | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 21 CFR 173.370(c) | Ecolab Publication | 2000 | Hydrogen Peroxide and Peracid (as Peracetic Acid) Content | Ecolab Inc. | |
Coast Guard | 46 CFR 160.132-5(c)(2) | IMO LSA Code | 2010 | International Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 120.360(b)(3) | ABS Publication | 1995 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.135-5(e)(2) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.151-21(r) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 54.05-20(b) | ASTM A 203/A 203M | 2007 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | ASTM International | |
Coast Guard | 46 CFR 160.151-15(m) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(f)(2) | MIL-P-17549D(SH) | 1981 | Military Specification, Plastic Laminates, Fibrous Glass Reinforced, Marine Structural | U.S. Department of Defense | |
Coast Guard | 46 CFR 120.340(o) | IEEE 45 | 1977 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers |