This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.155(i)(1) | ASTM D 56 | 1969 | Standard Test Method for Flash Point by Tag Closed Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(a) | PCSA 2 | 1968 | Mobile Hydraulic Crane Standards | Power Crane and Shovel Association | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | 29 CFR 1910.107(b)(1) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(24) | ANSI Z35.1 | 1968 | Specifications for Accident Prevention Signs | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.57(h)(1)(ii) | NFPA 33 | 1969 | Spray Finishing Using Flammable and Combustible Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.605(a)(1) | 29 CFR part 1918 | 2014 | Safety and Health Regulations for Longshoring | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(5) | ANSI B30.5, 5-1.3.2 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Load Hoist Mechanism | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(6)(iii)(A) | 42 CFR Part 84 | 2014 | Respiratory Protection | National Institute for Occupational Safety and Health | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | 29 CFR 1910.107(b)(3) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.6(u)(4) | SAE J-397 | 1988 | Deflection Limiting Volume-ROPS/FOPS Laboratory Evaluation | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 820 | 2003 | Fire Protection in Wastewater Treatment and Collection Facilities | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(vii) | ANSI Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(17) | ANSI B20.1 | 1957 | Safety Code for Conveyors, Cableways, and Related Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.165 | ANSI/NFPA 71 | 2014 | Central Station Signaling Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1050 | 2005 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.253(f)(6)(i)(I) | NFPA 80 | 1970 | Standard for Fire Doors and Windows | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(18)(i) | ANSI B20.1 | 1957 | Safety Code for Conveyors, Cableways, and Related Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.153(b)(1)(iii) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | NFPA 26 | 1988 | Supervision of Valves | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-319b | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.453(b)(3) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(l)(4) | ASME B30.14 | 2004 | Side Boom Tractors | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(1)(ii) | SAE J-987 | 2003 | Lattice Boom Cranes—Method of Test | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(7) | NFPA 36 | 1967 | Standard for Solvent Extraction Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(2) | UL 80 | 1963 | Steel Inside tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | ANSI/NFPA 72B | 2014 | Auxiliary Signaling Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 40 CFR 1065.705 Table 1 | ISO 10307-2 | 2009 | Petroleum products--Total sediment in residual fuel oils--Part 2: Determination using standard procedures for ageing | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-231 | 1981 | Minimum Performance Criteria for Falling Object Protective Structures (FOPS) | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(34) | ANSI C33.2 | 1956 | Safety Standard for Transformer-Type Arc Welding Machines | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | ISO 3164 | 1997 | Earth-moving machinery -- Laboratory evaluations of protective structures -- Specifications for deflection-limiting volume | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(iii)(C) | NFPA 203M | 1970 | Manual on Roof Coverings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 16 | 2014 | Foam-Water Spray Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(3)(ii) | NFPA 58 | 2011 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.120, Appendix C, 2 | COMDTINST M16465.3 | 2013 | Policy Guidance for Response to Hazardous Chemical Releases | U.S. Coast Guard | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(4) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1051 | 2008 | Standard Specification for Rubber Insulating Sleeves | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.157 (2) | NFPA 10 | 2013 | Portable Fire Extinguishers | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(14)(ii) | IME Pamphlet No. 17 | 1960 | Safety in the Handling and Use of Explosives | Institute of Makers of Explosives | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(65) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(v) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(8) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.101(a)(1)(i)(C) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(20) | ASTM D 323 | 1968 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 142 | 1968 | Steel Above Ground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.57(g)(5)(i)(A) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.45(f)(5)(ii) | 49 CFR 571.208 | 2013 | Occupant crash protection | U.S. Department of Transportation |