This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(5) | API 620 | 1970 | Recommended Rules for Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b) | ANSI B31.1 Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.120(j)(1)(ii) | 29 CFR 1910.134 | 2014 | Respiratory Protection | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c) | ASME B30.14 | 2004 | Side Boom Tractors | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(4) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(2) | API 650 | 1966 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(7) | AWS D10.9 | 1969 | Standard Qualification of Welding Procedures and Welders for Piping and Tubing | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(16) | SAE J-743a | 1964 | Tractor Mounted Side Boom | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i)(B) | ASTM A 53 | 1969 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.200(b)(1) | ANSI Z53.1 | 1968 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.124(b)(4)(ii) | NFPA 34 | 1995 | Standard for Dip Tanks Containing Flammable or Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM F 1236 | 1996 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.252(c)(1)(vi)(A) | ANSI Z49.1 | 1967 | Safety in Welding and Cutting | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(30) | NFPA 496 | 1967 | Standard for Purged Enclosures for Electrical Equipment in Hazardous Locations | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(4) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(4) | ANSI Z89.1 | 1969 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(2) | NFPA 33 | 1969 | Standard for Spray Finishing Using Flammable and Combustible Material | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(2)(ii) | SAE J-4C | 1965 | Motor Vehicle Seat Belt Assembly | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.155(i)(1) | ASTM D 56 | 1969 | Standard Test Method for Flash Point by Tag Closed Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 24 | 2013 | Outside Protection | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1051 | 2008 | Standard Specification for Rubber Insulating Sleeves | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.101(a)(1)(i)(A) | ANSI Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.103(b)(1)(ii) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(iii) | 29 CFR 1910.107(b)(5) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(21) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.4 | 2003 | Portal, Tower, and Pedestal Cranes | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1926.57(g)(3)(ix) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(2) | ANSI B30.5, 5-1.1.2 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Load Ratings—Where Structural Competence Governs Lifting Performance, paragraph (b) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1050 | 2005 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASSE Z490.1 | 2001 | Criteria for Accepted Practices in Safety, Health, and Environmental Training | American Society of Safety Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(11) | CGA Publication | 1957 | Standard Hose Connection Standard | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.253(f)(6)(i)(I) | NFPA 80 | 1970 | Standard for Fire Doors and Windows | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(18)(i) | ANSI B20.1 | 1957 | Safety Code for Conveyors, Cableways, and Related Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.153(b)(1)(iii) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(iii) | ANSI B7.1 | 1964 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(15) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.507(d)(3) | NFPA 11 | 2005 | Standard for Low-Expansion Foam | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(4) | ANSI Z535.1 | 2011 | Specification of the Safety Colors for CIE Illuminate C and the CIE 1931, 2 Standard Observer | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.262(q)(1) | ASME B&PV Code | 1968 | Code for Unfired Pressure Vessels, Section VIII, Unfired/Pressure Vessels | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.162 | ANSI/NFPA 12 | 2014 | Carbon Dioxide Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 40 CFR 1065.705 Table 1 | ISO 10307-2 | 2009 | Petroleum products--Total sediment in residual fuel oils--Part 2: Determination using standard procedures for ageing | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.350(a)(12) | CGA P-1 | 1965 | Safe Handling of Compressed Gases | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(l)(1) | ASME B30.2 | 2005 | Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(iii)(C) | NFPA 203M | 1970 | Manual on Roof Coverings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 120 | 2009 | Standard Specification for Rubber Insulating Gloves | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(3)(ii) | NFPA 58 | 2011 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(4) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-386 | 1969 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers |