This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63.5935 Low Flame Spread/Low Smoke Products | ASTM E 162 | 2015 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 104, 7.1 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME A112.19.4M | 1984 | Porcelain Enameled Formed Steel Plumbing Fixtures | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.060-1(b) | Drawing No. 160.060-1, Sheet 5 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model CYM | U.S. Coast Guard | |
Labor Department | 41 CFR 50-204.68 | CGA G-5.2 | 1966 | Standard for Liquefied Hydrogen Systems at Consumer Sites | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.703(g)(9)(i) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 147.1750(a)(2) | NDUIC regulations | 1987 | North Dakota Administrative Code, Chapter 43-02-05 (Underground Injection Control, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission | State of North Dakota | |
Minerals Management Service | 10 CFR 431.64(b)(2) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Coast Guard | 33 CFR 154, Appendix B, 3.3.1 | ASME B&PV Code | 2005 | Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 61.355(c)(3)(iv)(D) | EPA Method 8260 | 1987 | Gas Chromatography/Mass Spectrometry for Volatile Organics: Capillary Column Technique | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 164.46(a)(3)(iii), Note to 164.46(a) | ITU-R Recommendation M.1371-1 | 1998 | Technical Characteristics for a Universal Shipborne Automatic Identification System Using Time Division Multiple Access in the VHF Maritime Mobile Band | International Maritime Organization | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(1)(ii) | EPA-600-4-79-020 | 1983 | Method 202.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (54) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5220(b)(5)(i) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(88) | ASTM D 2234 | 1998 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(u)(6) | SAE J-1040 | 1988 | Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines | Society of Automotive Engineers | |
Public Health Service | 42 CFR 37.10(f)(6) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(19) | ASTM D 1193 | 1970 | Standard Specification for Reagent Water | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.8M | 1989 | Suction Fittings for Use in Swimming Pools, Wading Pools, Spa, Hot Tubs, and Whirlpool Bathtub Appliances | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 430.3(e)(9) | ASHRAE 103 | 1993 | Methods of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (59) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (vanadium) | ASTM D 5673 | 2010 | Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7210 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1503 | ACGIH Guidelines | 1998 | Industrial Ventilation: A Manual of Recommended Practice | American Conference of Governmental Industrial Hygienists | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(3) | ANSI A14.5 | 1992 | Safety Requirements for Portable Reinforced Plastic Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(3) | ASTM D 56 | 1969 | Standard Method of Test for Flash Point by the Tag Closed Tester | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.14130(h) | SAE J-1194 | 1989 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Coast Guard | 33 CFR 183.607(a)(2) | ASTM D 471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 173.315 Table Note 15 | ASTM D 1838 | 1964 | Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | ASTM International | |
Coast Guard | 46 CFR 111.12-7(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.255-14(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5325-2C | 1975 | Airport Design Standards--Airports Served by Air Carriers--Surface Gradient and Line-of-Sight (Through change 1, 1975) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | ISI Method 1002-8 | 2009 | Dissolved Oxygen (DO) Measurement by Optical Probe | In-Situ Incorporated | |
Environmental Protection Agency | 40 CFR 98.344(a) | NIST Handbook 44 | 2009 | Specifications, Tolerances, and Other Technical Requirements For Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1910.252(c)(1)(vi)(B) | ANSI Z49.1 | 1967 | Safety in Welding and Cutting | American Welding Society | |
Coast Guard | 46 CFR 161.010-2 | UL 1196 | 1987 | Standard for Floating Waterlights | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 75, Appendix G, Section 2.2.1 | ASTM D 3174 | 2000 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal | ASTM International | |
Coast Guard | 46 CFR 160.047-4(b) | Drawing No. 160.047-1, Sheet 1, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child--Cutting Pattern and General Arrangement, Models AK-1, and AF-1 | U.S. Coast Guard | |
Coast Guard | 46 CFR 175.600(b) Table | UL 217 | 1993 | Single and Multiple Station Smoke Detectors | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1116 | 2008 | Standard Test Method for Determining Dielectric Strength of Dielectric Footwear | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(6) | ASTM D 525 | 2012 | Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(v)(A) | EPA Method 200.9 | 1993 | Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | APHA Method 3111 C | 1999 | Metals by Flame Atomic Absorption, Extraction and Direct Aspiration | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(f) | ASTM D 6722 | 2001 | Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by the Direct Combustion Analysis | ASTM International | |
National Archives and Records Administration | 36 CFR 1235.46(b)(2) | ANSI X3.180 | 1990 | Magnetic Tape and Cartridge for Information Interchange - 18-Track, Parallel, 1/2-inch (12.65mm), 37 871 CPI (1491 cpmm), Group-Coded Requirements for Recording | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 36 | 2004 | Solvent Extraction Plants | National Fire Protection Association | |
Health and Human Services Department | 45 CFR 162.1102(a)(3) | ASC X12N 837 | 2000 | Health Care Claim: Professional | Washington Publishing Company |