This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(i) Note to paragraph (c)(2)(i) | ASTM F 1236 | 2012 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(26) | ANSI B31.2 | 1968 | Fuel Gas Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(y)(4) | ISO 10156-2:2005 (E) | 2005 | Gas cylinders—Gases and Gas Mixtures—Part 2: Determination of Oxidizing Ability of Toxic and Corrosive Gases and Gas Mixtures, First Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(17)(ii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels with Addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 58 | 1961 | Steel Underground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(1)(ii) | ANSI Z41 | 1999 | Protective Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(2) | ASME B&PV Code | 1968 | Code for Pressure Vessels | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 178 | 2001 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.2 | 1960 | Practice for the Inspection of Elevators | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.254(b)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(2) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(4) | AWS D1.0 | 1966 | Code for Welding in Building Construction | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1910.159(a)(2) | NFPA 13 | 2013 | Automatic Sprinkler Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(2) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(a)(5)(i) | SAE J-168 | 1970 | Protective Enclosures--Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(10) | ANSI Z90.1 | 2014 | Specifications for Protective Headgear for Vehicular Users | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.158(a)(1) | 46 CFR Part 160 | 2014 | Coast Guard Lifesaving Equipment Specifications | U.S. Coast Guard | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(5) | NFPA 251 | 1969 | Standard Methods of Fire Test of Building Construction and Material | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1436(c)(1)(ii) | ANSI/AWS D14.3 | 1994 | Specification for Welding Earthmoving and Construction Equipment | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(2) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(19) | ASTM D 240 | 2007 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(vi) | NFPA 10 | 2002 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(45) | ANSI S1.11 | 1976 | Specification for Octave, Half-Octave and Third-Octave Band Filter Sets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.101(a) | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(6)(ii) | NFPA 78 | 1968 | Lightning Protection Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(a)(2)(iii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | ANSI/NFPA 20 | 2014 | Centrifugal Fire Pumps | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.602(b)(2) | SAE Publication | 1970 | SAE Handbook | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b) | ANSI B31.1 Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(15)(ii) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1116 | 2008 | Standard Test Method for Determining Dielectric Strength of Dielectric Footwear | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart T Appendix C (5)(a) | DSAT No-Decompression Tables | 1994 | Development and Validation of No-Stop Decompression Procedures for Recreational Diving: The DSAT Recreational Dive Planner | Hamilton Research Ltd. | |
Occupational Safety and Health Administration | 29 CFR 1910.268(s)(1)(v) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Patent and Trademark Office | 37 CFR 1.821(a) | WIPO Standard ST.25 | 1998 | WIPO Handbook on Industrial Property Information and Documentation | World Intellectual Property Organization | |
Patent and Trademark Office | 30 CFR 57.6201(a)(2) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Patent and Trademark Office | 37 CFR 1.821(a)(1) | WIPO Standard ST.25 | 1998 | WIPO Handbook on Industrial Property Information and Documentation | World Intellectual Property Organization | |
Patent and Trademark Office | 37 CFR 1.821(a)(2) | WIPO Standard ST.25 | 1998 | WIPO Handbook on Industrial Property Information and Documentation | World Intellectual Property Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1709 | 2001 | Standard Test Method for Impact Resistance of Plastic Film by the Free-Falling Dart Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 9809-2 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.185(a)(1) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(3) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.573(a)(2) | NACE RP-0169 | 2002 | Control of External Corrosion on Underground or Submerged Metallic Piping Systems, paragraphs 6.2, 6.3, 10.1.1.3. | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 29 CFR 1926.152(i)(1)(v)(B) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H50155 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a)(1) | ASTM A 1011/A 1011M | 2003 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(m)(2) | ISO 11114-2 | 2000 | Transportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.3(e)(2) | CI B Kit | 2003 | Chlorine Institute Emergency Kit "B" for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks) | Chlorine Institute, Inc. |