This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(iii)(A) | 29CFR 1910.107(b)(5) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.57(f)(2)(iii) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.453 Note | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.16 | 2003 | Overhead Hoists (Under-hung) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.163 | ANSI/NFPA 15 | 2014 | Water Spray Fixed Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(11) | NFPA 54A | 1969 | Standard for the Installation of Gas Piping and Gas Equipment on Industrial Premises and Certain Other Premises | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.164 | ANSI/NFPA 72D | 2014 | Proprietary Protective Signaling Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 142 | 1968 | Steel Above Ground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(36) | ANSI H23.1 | 1970 | Seamless Copper Water Tube Specification | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 11 | 2014 | Foam Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1956 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.268(j)(4)(iv)(E) | ANSI B30.6 | 1969 | Safety Code for Derricks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 120 | 2009 | Standard Specification for Rubber Insulating Gloves | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.253(e)(6)(i) | CGA Publication | 1958 | Regulator Connection Standard | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1926.605(a)(1) | 29 CFR part 1918 | 2014 | Safety and Health Regulations for Longshoring | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(15) | ANSI Z21.30 | 1964 | Requirements for Gas Appliances and Gas Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(B)(3) | CGA C-2 | 2014 | Recommendations for the Disposition of Unserviceable Compressed Gas Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1915.134(c) | ANSI B7.1 | 1964 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(1) | 29 CFR 1926.1001 | 2019 | Minimum Performance Criteria for Rollover Protective Structures for Designated Scrapers, Loaders, Dozers, Graders, and Crawler Tractors | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b) | ANSI B30.5 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(iii) | 29 CFR 1910.107(b)(4) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(32) | ANSI/ISEA Z89.1 | 2009 | Industrial Head Protection | International Safety Equipment Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(10) | ANSI B30.5, 5-1.7.4 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Sheaves | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM F 1236 | 2012 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(k)(12)(i) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.6(y)(4) | ISO 10156-2:2005 (E) | 2005 | Gas cylinders—Gases and Gas Mixtures—Part 2: Determination of Oxidizing Ability of Toxic and Corrosive Gases and Gas Mixtures, First Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(1)(i) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(23) | NFPA 96 | 1970 | Standard for the Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(7) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(ii)(B) | CGA P-3 | 1963 | Specifications, Properties, and Recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(3)(i) | NFPA 58 | 2011 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(i) | NFPA 1981 | 2002 | Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(2) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(6) | API UPV Code | 1951 | Code for Unfired Pressure Vessels for Petroleum Liquids and Gases | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(10) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.268(i)(1) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.94(b)(1)(iii) | ANSI/NSC Z41 | 1991 | Protective Footwear | National Safety Council | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(D)(2) | ANSI/NFPA 13A | 2014 | Standard for the Care and Maintenance of Sprinkler Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.303(c)(3) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(10) | ANSI Z90.1 | 2014 | Specifications for Protective Headgear for Vehicular Users | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z535.1 | 2011 | Safety colors | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1956 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.165 | ANSI/NFPA 72A | 2014 | Local Protective Signaling Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(x)(2) | ISO 11660-2:1994(E) | 1994 | Cranes—Access, guards and restraints—Part 2: Mobile cranes | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.1423(c)(3)(i) | SAE J-185 | 2003 | Recommended Practice for Access Systems for Off-Road Machines | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(1)(ii) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(19) | ASTM D 240 | 2007 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(8) | CGA S-1.1 | 1963 | Safety Release Device Standards-Cylinders for Compressed Gases with 1965 Addenda | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(r)(1) | NFPI Publication | 1964 | Definition and Test Procedures for Ammonium Nitrate Fertilizer | National Food Plant Institute |