This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1961 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(iii) | 29 CFR 1910.107(b)(5) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(5)(ii) | ANSI B31.1 | 1967 | Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(12) | ASME B56.1 | 1959 | Safety Standard for Powered Industrial Trucks | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(27) | ANSI B31.3 | 1966 | Petroleum Refinery Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(3)(iii) | ASME UPV Code | 1951 | Code for Unfired Pressure Vessels for Petroleum Liquids and Gases with 1954 Addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.218(e)(1)(iv) | ANSI B31.1.0 | 1967 | Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.507(d)(5) | NFPA 2001 | 2004 | Standard on Clean Agent Fire Extinguishing Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.120(a)(3) Published Exposure Level | NIOSH Publication | 1986 | NIOSH Recommendations for Occupational Safety and Health Standards | National Institute for Occupational Safety and Health | |
Occupational Safety and Health Administration | 29 CFR 1910.219(c)(5)(iii) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.1c | 1969 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI B31.2 | 1968 | Fuel Gas Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(4)(i) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(b)(4)(i) | NFPA 251 | 1969 | Standard Methods of Fire Tests for Building Construction and Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(77) | ANSI Z87.1 | 1968 | Practice of Occupational and Educational Eye and Face Protection; | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.306(a)(2)(ii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z535.1 | 2011 | Safety colors | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(x)(2) | ISO 11660-2:1994(E) | 1994 | Cranes—Access, guards and restraints—Part 2: Mobile cranes | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.1423(c)(3)(i) | SAE J-185 | 2003 | Recommended Practice for Access Systems for Off-Road Machines | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.162 | ANSI/NFPA 12 | 2014 | Carbon Dioxide Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(1)(ii) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(10) | ANSI/ISEA Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM F 496 | 2008 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(39) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(17) | ASTM D 5 | 1965 | Standard Test Method for Penetration of Bituminous Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(v) | ANSI Z9.1 | 1951 | Safety Code for Ventilation and Operation of Open Surface Tanks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(1)(iii) | ANSI Z41 | 1991 | Personal Protection-Protective Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1067 | 2005 | Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and ±750 kV DC | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(5) | ANSI/NSC Z41 | 1991 | Protective Footwear | National Safety Council | |
Occupational Safety and Health Administration | 29 CFR 1910.262(w)(1) | ASME B&PV Code | 1968 | Code for Unfired Pressure Vessels, Section VIII, Unfired/Pressure Vessels | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.253(d)(1)(i)(A) | ASTM B 88 | 1966 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 819 | 2010 | Standard Terminology Relating to Electrical Protective Equipment for Workers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.603(a)(1) | ASME B&PV Code | 1968 | Power Boilers, Section I | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.261(l)(4) | ANSI A17.1 | 1965 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.95 Appendix D | ANSI S1.4 | 1976 | Specifications for Sound Level Meters | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(72) | ANSI Z88.2 | 1969 | Practices for Respiratory Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.300(b)(2) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(k)(12) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.101(a)(1)(ii) | ANSI Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(5) | AWS D2.0 | 1969 | Specifications for Welding Highway and Railway Bridges | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(8) | SAE J-319b | 1971 | Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(8) | ASME B30.14, Section 14-1.7.6 | 2004 | Side Boom Tractors, General Requirements—Clutch and Brake Protection. | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 4 | 1995 | Techniques for High-Voltage Testing | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI K61.1 | 1999 | Safety Requirements for the Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iv)(B)(1) | API 620 | 1966 | Recommended Rules for the Design and Construction of Large, Welded, Low-Pressure Storage Tanks, Third Edition | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 77 | 2000 | Recommended Practice on Static Electricity | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(2) | CGA C-8 | 1962 | Standard for Requalification of ICC-3HT Cylinders | Compressed Gas Association |