This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (32) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 6 | ASTM D 5673 | 2003 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.107a(d)(4)(v) | GPA 2261 | 2000 | Analysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography | Gas Processors Association | |
Research and Special Programs Administration | 49 CFR 173.315 Table Note 15 | ASTM D 1838 | 1964 | Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | ASTM International | |
Coast Guard | 46 CFR 111.12-7(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S16.3.3.1.11 | Drawing No. TE-2504 | 1994 | H-Point Locator, Hybrid III 5th | Reprographic Technologies | |
Energy Department | 10 CFR 440 Appendix A | ASME CSD-1 | 1988 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(2) | ANSI A14.2 | 1990 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(34) | ANSI/ISEA Z89.1 | 1997 | Personnel Protection—Protective Headwear for Industrial Workers—Requirements | International Safety Equipment Association | |
Environmental Protection Agency | 40 CFR 58 Appendix C, 6.0(6) | AWMA Publicaltion | 1988 | IMPROVE—a new remote area particulate monitoring system for visibility studies, Eldred, R.A., Cahill, T.A., Pitchford, M., and Malm, W.C.; Proceedings of the 81st Annual Meeting of the Air Pollution Control Association, Paper 88-54.3 | Air and Waste Management Association | |
Food and Drug Administration | 21 CFR 161.190(a)(7)(iii) | OSA Publication | 1943 | Journal of the Optical Society of America | Optical Society of America | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(15) | ANSI Z21.30 | 1964 | Requirements for Gas Appliances and Gas Piping | American National Standards Institute | |
Coast Guard | 45 CFR 162.920(c)(4)(vi) | CAQH Publication | 2012 | Phase III CORE 350 Health Care Claim Payment/Advice (835) Infrastructure Rule, version 3.0.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 46 CFR 56.01-2(e)(19) | ASTM A 234/A 234M | 1997 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | AOAC Method 993.14 | 1998 | Magnesium-Total, mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (8) Calcium | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 75, Appendix G, Section 2.1.2 | ASTM D 1946 | 1990 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Federal Trade Commission | 16 CFR 309.10(a) | ASTM D 1945 | 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Federal Highway Administration | 23 CFR 625.4(b)(3) | AASHTO Publication | 1994 | Interim Specifications, Bridges | American Association of State Highway and Transportation Officials | |
Public Health Service | 42 CFR 52b.12(c)(10) | AIHA Publication | 1994 | Laboratory Ventilation Workbook | American Industrial Hygiene Association | |
Rural Utilities Service | 7 CFR 1755.870(h)(7) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.304a(e)(1)(ii) | CGA S-1.1 | 2001 | Pressure Relief Device Standards | Compressed Gas Association | |
Coast Guard | 46 CFR 175.540(d) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(M) | EPA Method 283.2 | 1978 | Titanium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 11(a) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1426(f)(17)(i) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(60) | ASTM B 210 | 1995 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes | ASTM International | |
Housing and Urban Development Department | 24 CFR 3285.4(e)(1) | ASTM C 90 | 2002 | Standard Specification for Load-Bearing Concrete Masonry Units | ASTM International | |
Food and Drug Administration | 21 CFR 1.24(a)(6)(iii) | NIST Handbook 44 | 2010 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.141 Table A | Drawing No. 210-2001 | 2009 | Neck Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9012B | 2004 | Total and Amenable Cyanide (Automated Colorimetric, with Off-Line Distillation) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.93(a)(1) | FMVSS 209 | 1998 | Seat Belt Assemblies | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.133-7(b)(3) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 573.182(a) | Drawing No. 175-0000, Sheet 1 of 6 | 2008 | Transducers-crash test sensors for the ES-2re Crash Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.1751(a)(2) | NDUIC regulations | 1989 | North Dakota Century Code, Sections 61-28-02 and 61-28-06 | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63, Subpart YYYY, Table 3, (d) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectrosco | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(v) | ASTM C 1114 | 1995 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus | ASTM International | |
Coast Guard | 46 CFR 160.055-1(b) | Drawing No. 160.055-1B, Sheet 1 | 2012 | Life Preservers, Unicellular Foam, Child, Construction and Arrangement, Cloth Covered, Model 63, Adult | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (55) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.151 Table A | Drawing No. 921022-055R | 2001 | Leg Assembly, Right | Reprographic Technologies | |
Federal Motor Carrier Safety Administration | 49 CFR 393.104(e)(5)(iv) | CIA NRS-1 | 1979 | Nylon Rope Specification, Three- and Eight-Strand Standard Construction | Cordage Institute | |
Environmental Protection Agency | 40 CFR 79.56(d)(5)(i) | ASTM D 975 | 1993 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 110.10-1(g)(5) | IEC 60332-3-22 | 2000 | Tests on Electric Cables Under Fire Conditions—Part 3-22: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables—Category A, First Edition | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.17(a)(2) | Drawing No. SA 103C 020 | 1976 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (59) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (strontium) | ASTM D 5673 | 2010 | Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5400(f) | ASTM E 168 | 1992 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers |