This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Nuclear Regulatory Commission | 10 CFR 52 App. A, III A | DOE Publication | 1997 | U.S. ABWR Design Control Document | General Electric Co. | |
Environmental Protection Agency | 40 CFR 62.14105(a) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM D 1238 | 1990 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization -Revision 3.1. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (5) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98, Subpart I, Appendix A, (b) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(2) | UL 80 | 1963 | Steel Inside tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Public Health Service | 42 CFR 37.43(f) | AAPM Report No. 74 | 2002 | Quality Control in Diagnostic Radiology, Report of Task Group 12, Diagnostic X-Ray Imaging Committee | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(33) | ASTM E 1136 | 2003 | Standard Specification for a Radial Standard Reference Test Tire | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 395/A 395M | 1998 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Housing and Urban Development Department | 24 CFR 3285.4(g)(1) | FEMA 85 | 1985 | Manufactured Home Installation in Flood Hazard Areas | Federal Emergency Management Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Toluene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2500(b)(5) | WIUIC regulations | 1977 | Wisconsin Statutes 803.09(1) (West 1977) (intervention as of right in civil actions) | State of Wisconsin | |
Environmental Protection Agency | 40 CFR 63.11647(a)(3)(ii) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.417(a)(3)(i) | ANSI N14.1 | 2001 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 834 | 1986 | Latex Sealing Compounds | ASTM International | |
Energy Department | 10 CFR 430.3(k)(5) | IES LM-45 | 2000 | Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps | Illuminating Engineering Society of North America | |
Occupational Safety and Health Administration | 29 CFR 1926.6(x)(3) | ISO 11660-3:2008(E) | 2008 | Cranes—Access, guards and restraints—Part 3: Tower cranes, 2d ed. | International Organization for Standardization | |
Mine Safety and Health Administration | 30 CFR 57.14131(c) | SAE J-386 | 1993 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Interior Department | 43 CFR 11.18(a)(5) | DOI NRDAM/GLE | 1999 | The CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments Technical Documentation, Volumes I-IV, dated April 1996, including Revision I dated October 1997, and Revision II dated December 1999 | U.S. Department of the Interior | |
Food and Drug Administration | 21 CFR 184.1007(b)(6) | Food Chemicals Codex | 1996 | Aconitic Acid | National Academy Press | |
Environmental Protection Agency | 40 CFR 80.2(w), Cetane index | ASTM D 976 | 2006 | Standard Methods for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(1) | 29 CFR 1926.1001 | 2019 | Minimum Performance Criteria for Rollover Protective Structures for Designated Scrapers, Loaders, Dozers, Graders, and Crawler Tractors | Occupational Safety and Health Administration, U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.910(d)(6)(iii) | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0020 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (104) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table Note 3 | ASTM Annual Book of Standards | 2001 | Water and Environmental Technology, Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(46) | ASTM D 4017 | 1990 | Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method | ASTM International | |
Coast Guard | 46 CFR 160.151-21(c) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 175.600(b) Table | UL 1453 | 1994 | Electric Booster and Commercial Storage Tank Water Heaters | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(27) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(k)(5)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 52.01-50(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (65) | APHA Method 4110 B | 2000 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(2) Table Note 1 | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41b Distillate oil | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.105a(g)(2) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 98.7(m)(7) | EPA ALT-012 | 1994 | Approved Alternative Method 012: An Alternate Procedure for Stack Gas Volumetric Flow Rate Determination (Tracer Gas) (ALT-012), U.S. Environmental Protection Agency Emission Measurement Center | International Organization for Standardization | |
Energy Department | 10 CFR 430 Subpart B, App. F, 5.2 | ANSI/ASHRAE 16 | 2009 | Method of Testing for Rating Room Air Conditioners | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-5(b)(4) | ASTM A 314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.185(c) | Drawing No. 175-0000 | 2009 | ES-2re Dummy Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200.937(a)(1) | ANSI Z124.2 | 1980 | Plastic Shower Receptors and Stalls | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.17(g)(122) | ASTM D 3177 | 1989 | Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(82) | ASTM D 6722 | 2001 | Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by the Direct Combustion Analysis | ASTM International | |
Food and Drug Administration | 21 CFR 801.430(f)(2) | ASTM D 3492 | 1997 | Standard Specification for Rubber Contraceptives (Male Condoms) | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) E6 | ASTM A 672 | 2001 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | ASTM International | |
Federal Energy Regulatory Commission | 18 CFR 284.12(a)(1)(iii) | NAESB Publication | 2006 | Flowing Gas Related Standards | North American Energy Standards Board | |
Research and Special Programs Administration | 49 CFR 173.420(a)(1) | ANSI N14.1 | 1971 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute |