This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 2784 | 1989 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.7(b) | ASTM D 4329 | 1999 | Standard Practice for Fluorescent UV Exposure of Plastics | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (59) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Research and Special Programs Administration | 21 CFR 177.2490(a) | FDA Publication | 1989 | Analysis for Dicholorbenzene in Ryton Polyphenylene Sulfide | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 303 | 2014 | Radioactive Strontium 89 and 90, Radiochemical Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 1266 | 2003 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IA (7) | EPA Method 1600 | 2009 | Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI) | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1728.97(e)(10) | AWPA P1/P13 | 2006 | Standard for Creosote Preservative | American Wood Protection Association | |
Energy Department | 10 CFR 431.133(b)(1) | ARI 810 | 2003 | Performance Rating of Automatic Commercial Ice-Makers | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 1060.810(c) Table 3 | California Code of Regulations | 2004 | Final Regulation Order, Article 1, Chapter 15, Division 3, Title 13 | California Air Resources Board | |
Coast Guard | 33 CFR 127.107(c) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.151-33(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.310(b)(4) | SAE J-2263 | 2008 | Road Load Measurement Using Onboard Anemometry and Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2.1 | ASTM D 2369 | 1993 | Standard Test Method of Volatile Content for Coatings | ASTM International | |
Research and Special Programs Administration | 46 CFR 111.105-41 | IEEE 45 | 1998 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F C | 1995 | Fluoride by Ion-Selective Electrode Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 272.501(b)(1) | FLHWMP | 1997 | Florida Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Florida | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 1266 | 1991 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 63.3521(b)(1) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(10) | API MPMS | 2005 | Chapter 4, Section 1 | American Petroleum Institute | |
Coast Guard | 46 CFR 134.140(a) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.125(a) | Drawing No. 127-3002 | 1994 | Lumbar spine | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(N) | EPA Method 631 | 1993 | The Determination of Benomyl and Carbendazim in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | EPA Method 218.1 | 1971 | Chromium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(10) | SAE J-1939-13 | 1999 | Off-Board Diagnostic Connector | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.94(b)(4)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Coast Guard | 40 CFR 136.3(a) Table IF (Acetonitrile) | ASTM D 3371 | 1995 | Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 178.3530(a) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 184.1595(b) | Food Chemicals Codex | 1981 | Pepsin | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1308(b) | Food Chemicals Codex | 1981 | Ferrous Gluconate | National Academy Press | |
Federal Motor Carrier Safety Administration | 49 CFR 384.225(f) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (114) | ASTM D 7065 | 2006 | Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 147.850(a)(2) | KSUIC regulations | 1986 | Chapter 28, Article 46, Underground Injection Control Regulations, Kansas Administrative Regulations §§ 28-46-1 through 28-46-42 (1986 and Supp. 1987) | State of Kansas | |
Environmental Protection Agency | 40 CFR 63.457(b)(5)(i) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 843 | 1992 | Application of Gypsum Veneer Plaster | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(33) | ASTM A 369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International | |
Food and Drug Administration | 16 CFR 1201.7(b)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (72) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/Mass Spectrometric Method | American Public Health Association | |
Coast Guard | 21 CFR 101.9(c)(7)(ii) | FAO/WHO Publication | 1990 | Protein Quality Evaluation Report | Food and Agricultural Organization of the United Nations | |
Minerals Management Service | 30 CFR 250.1202(a)(2)(viii) | API MPMS | 2013 | Chapter 21, Addendum to Section 2 | American Petroleum Institute | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section X | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 195.3(c) E5 | ASTM A 671 | 2004 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | ASTM International | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.48(a) | The United States Pharmacopoeia | 1980 | Formula No. 23-F | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 160.005-1(a)(1) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 4568 | 1986 | Standard Test Method for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(14)(i) | EPA-600-4-91-010 | 1994 | Method 200.8--Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 197.336(a) | ANSI B31.1 | 2013 | Code for Pressure Piping | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 173.420(a)(2)(iii) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers |