This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 243.202-1(d)(1) | ANSI Z245.2 | 1997 | Stationary Compactors—Safety Requirements | American National Standards Institute | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(3)(iii) | EPA-600-4-79-020 | 1983 | Method 375.3--Gravimetric | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 59.01-2(b)(1) | ASME B&PV Code | 1990 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(5) Note (1) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Coast Guard | 46 CFR 160.057-1(a)(2) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S6.4 | ASTM E 4 | 2003 | Standard Practices for Force Verification of Testing Machines | ASTM International | |
Coast Guard | 40 CFR 1065.1010(e)(3) | ISO 3104 | 1997 | Petroleum products--Transparent and opaque liquids--Determination of kinematic viscosity and calculation of dynamic viscosity | International Organization for Standardization | |
Energy Department | 10 CFR 434.402.1.1 | ASTM C 236 | 1993 | Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box (RS-7) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE J-167 | 1970 | Protective frame with overhead protection—test procedures and performance requirements | Society of Automotive Engineers | |
Interior Department | 43 CFR 11.44(d) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 49 CFR 178.46(h)(2) | ASTM E 290 | 1992 | Standard Test Method for Semi-Guided Bend Test for Ductility of Metallic Materials | ASTM International | |
Coast Guard | 21 CFR 178.3870(f)(6)(i) | FDA Publication | 1990 | Determination of Abietic Acid and Dehydroabietic Acid in Rosins | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 63.3951(c) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(67) | API RP 2556 | 2003 | Recommended Practice for Correcting Gauge Tables for Incrustation | American Petroleum Institute | |
Coast Guard | 46 CFR 130.240(a) | ABS Publication | 1975 | Rules for Building and Classing Aluminum Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b)(1)(iv) | Drawing No. SA-572-S11 | 1987 | Six axis neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 28, Section 16.1.1 | ASTM D 4442 | 1992 | Standard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials | ASTM International | |
Food and Drug Administration | 21 CFR 184.1505(b) | Food Chemicals Codex | 1981 | Mono- and Diglycerides | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1293(b) | Food Chemicals Codex | 1996 | Ethyl Alcohol | National Academy Press | |
Federal Highway Administration | 23 CFR 655.603(c) | FHWA Publication | 2009 | Color Tolerance Charts | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (112) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(d)(4)(i) | APHA Method 5310 B | 2000 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(95) | ASTM E 871 | 2006 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 63.2163(b)(3) | EPA/600/R-12/531 | 2012 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/Mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 515.3 | 1996 | Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Extraction, Derivitization, and Gas Chromatography with Electron Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Coal | ASTM D 388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 46 CFR 52.25-3 | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 101.100(a)(4) | AOAC Official Methods | 1984 | Official Methods of Analysis | Association of Official Analytical Chemists | |
Rural Utilities Service | 7 CFR 1755.903(t)(1) | ASTM D 4566 | 1998 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | International Telecommunication Union--Telecommunication | |
Environmental Protection Agency | 40 CFR 300.915(b)(8) | ASTM D 56 | 1987 | Standard Test Method for Flash Point by Tag Closed Tester | ASTM International | |
Coast Guard | 46 CFR 182.500(b) | ABYC H-22 | 1986 | DC Electric Bilge Pumps Operating Under 50 Volts | American Boat and Yacht Council | |
Rural Utilities Service | 7 CFR 1728.202(d)(3) | AWPA P8 | 2008 | Standard for Oil-Borne Preservatives | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (3) | AOAC Method 993.14 | 1998 | Aluminum-Total, mg/L | AOAC International | |
Nuclear Regulatory Commission | 10 CFR 73 App. B, IV C note 2 | NRA Publication | 1976 | NRA Target Manufacturers Index | National Rifle Association | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.3.1.2 | ASTM D 3246 | 1996 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Coast Guard | 46 CFR 197.204, ASME PVHO-1 | ASME PVHO-1 | 2014 | Safety Standard for Pressure Vessels for Human Occupancy | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1996 | Standard Specification for Fuel Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(37) | ANSI H38.7 | 1969 | Specification for Aluminum Alloy Seamless Pipe and Seamless Extruded Tube | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. M, 1.9 | ASHRAE 41.6 | 2001 | Methods of Measurement of Moist Air Properties | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.176-4(b) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xl) | ASTM D 3558 | 2008 | Standard Test Method for Cobalt in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, B | ISO 10707:1994(E) | 1994 | Water Quality—Evaluation in an Aqueous Medium of The Ultimate Aerobic Biodegradability of Organic Compounds—Method by Analysis of Biochemical Oxygen Demand (Closed Bottle Test). First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 2000 | Chapter 3, Section 4 | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.146(h) | Drawing No. 921-0022-036 | 1994 | No title given | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Disulfoton) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart L | GAHWMP | 2014 | State of Georgia Hazardous Waste Management Program (Reserved) | State of Georgia | |
Food and Drug Administration | 21 CFR 177.1360(d) | KCL Publication | 1987 | Analytical Method of Determining the Amount of EVOH in the Extractive Residue of EVOH Film | Kuraray Co., Ltd. | |
Housing and Urban Development Department | 24 CFR 3280.705(b)(4) | ASTM A 539 | 1999 | Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines | ASTM International |