This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 435.11(uu) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 87 FR 30775 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Direct Heating Equipment | International Electrotechnical Commission |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(30) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Coast Guard | 40 CFR 1065.703 Table 1 | ASTM D 4052 | 2011 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-3560 | 2011 | Chest flesh assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Federal Motor Carrier Safety Administration | 49 CFR 384.231(d) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(1) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.750(a)(2)(i) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 63.11237 Biodiesel | ASTM D 6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(vi) | Drawing No. 420-5000-1 | 2011 | Complete Leg Assembly—left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(5) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 51 | ASTM D 2369– 10 | 2011 | Test Methods and Performance Specifications for Air Emission Sources | ASTM International |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 435.15 Note 11(a) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Federal Communications Commission | 88 FR 21424 | 47 CFR 67 | RTCM 12800.0 | 2011 | Establishment of the Space Bureau and the Office of International Affairs and Reorganization of the Consumer and Governmental Affairs Bureau and the Office of the Managing Director | Radio Technical Commission for Maritime Services |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(v) | SAE J-167 | 2011 | Protective Frame with Overhead Protection | Society of Automotive Engineers | |
Environmental Protection Agency | 86 FR 34308 | 40 CFR 1066 | SAE J1594 (J1594_201007) | 2011 | Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments | SAE International |
Energy Department | 87 FR 55090 | 10 CFR 430 | IEC 62040-3:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Energy Department | 87 FR 37685 | 10 CFR 431 | IEC 63103:2020 | 2011 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (vi) | Drawing No. 420-5000-2 | 2011 | Complete Leg Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 88 FR 3234 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Dishwashers | International Electrotechnical Commission |
Federal Highway Administration | 23 CFR 625.4(a) | AASHTO Interstate Standards | 2011 | A Policy on Geometric Design of Highways and Streets | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 1065.267(b) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(B) | DICOM Standard PS 3.4-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.11(k)(2) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Health and Human Services Department | 45 CFR 162.920(c)(1)(i) | CAQH Publication | 2011 | Phase I CORE 152: Eligibility and Benefit Real Time Companion Guide Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(13) | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
Agriculture Department | 86 FR 57015 | 7 CFR 1728 | RUS Bulletin 1728H–701 | 2011 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers | Rural Utilities Service, U.S. Department of Agriculture |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-3000 | 2011 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 88 FR 59662 | 40 CFR 761 | ASTM D3278-96(2011) | 2011 | Alternate PCB Extraction Methods and Amendments to PCB Cleanup and Disposal Regulations | ASTM International |
Environmental Protection Agency | 85 FR 17244 | 40 CFR 60 | ASTM D6522–11 | 2011 | National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills Residual Risk and Technology Review | ASTM International |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 11(b) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(vii) | Drawing No. 420-5000-2 | 2011 | Complete Leg Assembly—right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 60 | ASTM D 2369– 10 | 2011 | Test Methods and Performance Specifications for Air Emission Sources | ASTM International |
Public Health Service | 42 CFR 37.10(d)(1) | ILO Publication | 2011 | Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses | International Labor Organization | |
Energy Department | 88 FR 14014 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Air Cleaners | International Electrotechnical Commission |
Energy Department | 87 FR 55090 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (vii) | Drawing No. 420-7000-1 | 2011 | Complete Arm Assembly, left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 69 | EPA Method 1627 | 2011 | Kinetic Test Method for the Prediction of Mine Drainage Quality, EPA-821-R-09-002 | U.S. Environmental Protection Agency | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(C) | DICOM Standard PS 3.10-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 10: Media Storage and File Format for Media Interchange | National Electrical Manufacturers Association | |
Health and Human Services Department | 45 CFR 162.920(c)(1)(ii) | CAQH Publication | 2011 | Phase I CORE 153: Eligibility and Benefits Connectivity Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Energy Department | 88 FR 31102 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Portable Air Conditioners | International Electrotechnical Commission |