This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 200, Appendix A | WQA S-300 | 1984 | Point-of-Use, Low Pressure Reverse Osmosis Drinking Water Systems | Water Quality Association | |
Environmental Protection Agency | 40 CFR 1051.501(d)(2)(i) | 40 CFR 1051.515(a)(1) | 2012 | Preconditioning fuel soak | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.161 Table A | Drawing No. 167–0000 | 2004 | Complete Assembly | Leet-Melbrook | |
Coast Guard | 46 CFR 160.041-4(a) | NIST R-178 | 1941 | Packaging of First-Aid Unit Dressings and Treatments | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.22 | 2001 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 306B, Section 11.1 | ASTM D 1331 | 1989 | Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface Active Agents | ASTM International | |
Coast Guard | 46 CFR 111.60-5(a)(2) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.9.1 | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 58.10-5(b)(3)(i) | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.156-5(b)(5) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(iv) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.131(d)(2) | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(78) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Coast Guard | 46 CFR 116.300(c) | ABS Publication | 1995 | Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways | American Bureau of Shipping | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394 | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Anthracite | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 62.16015(e)(3)(i) | EPA-454/R-98-015 | 1997 | OAQPS Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S10(b) | SAE J-1383 | 1985 | Performance Requirements for Motor Vehicle Headlamps | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24A, Section 7.1 | ASTM D 1475 | 1960 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.58(m)(5)(i) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Coast Guard | 33 CFR 154.814(l)(5) | API 2000 | 1987 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.14(g)(58) | ASTM D 5066 | 1991 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints--Weight Basis | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(16) | API MPMS | 2005 | Chapter 5, Section 1 | American Petroleum Institute | |
Coast Guard | 46 CFR 148.8(b)(1) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.126(b) | Drawing No. 127-4014 | 1987 | Lower leg | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Coast Guard | 46 CFR 164.023-3(b)(4) | FedSpec V-T-285E | 1986 | Thread, Polyester | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 147.1550(a)(1) | NJUIC regulations | 1990 | Water Pollution Control Act, New Jersey Statutes Annotated sections 58:10A-1 through 58:10A-20 | State of New Jersey | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-1, 2.1 | ASTM D 6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Food and Drug Administration | 21 CFR 184.1670(b) | Food Chemicals Codex | 1981 | Propylparaben | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1349(b) | Food Chemicals Codex | 1981 | Karaya Gum (Sterculia Gum) | National Academy Press | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(14) | SAE J-1292 | 1981 | Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (9) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxvii) | ASTM D 1889 | 2000 | Standard Test Method for Turbidity of Water (Withdrawn 2007) | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(2) | OECD No. 102 | 1995 | Guidelines for the Testing of Chemicals, Melting Point/Melting Range | Organization for Economic Cooperation and Development | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 553 | 1977 | Blanket and Felt Mineral Fiber Insulation (Industrial Type) | ASTM International | |
Coast Guard | 33 CFR 154, Appendix A, 8.6 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1)(iv) | Drawing No. 880105-450 | 2000 | Lower Torso Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (74) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) table IG (Norflurazon) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart F | CAHWMP | 2014 | State of California Hazardous Waste Management Program (Reserved) | State of California | |
Environmental Protection Agency | 40 CFR 75.6(b)(3) | ASME MFC-5M | 1994 | Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.902(a)(4) | IEEE C2 | 2007 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Rural Utilities Service | 7 CFR 1755.390, Appendix A III(5)(c) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 72.2 EPA Protocol Gas Production Site | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 434.701.1 RS-17 | ARI 310/380 | 1993 | Packaged Terminal Air-Conditioners and Heat Pumps (RS-17) | Air Conditioning and Refrigeration Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.100-20(a) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International |