This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 65.2 Hard piping | ASME B31.3 | 2014 | Chemical Plant and Petroleum Refinery Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 164.023-7(a)(1) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.137(i) | Drawing No. SA-572-S14 | 1987 | Femur load transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Fenarimol) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 268.7(c)(2) | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 179.200-15(c) | ASTM A 47 | 1968 | Standard Specification for Malleable Iron Castings | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Alachlor) | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization -Revision 3.1. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.7575 Distillate oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(17) | ASTM C 150 | 2007 | Standard Specification for Portland Cement | ASTM International | |
Coast Guard | 46 CFR 160.005-4(b) | Drawing No. 160.005-1 (Sheet 4) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(e) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(d)(3) | ANSI/NFPA 14 | 2014 | Standard for the Installation of Standpipe and Hose Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 272.2201(b)(1)(i) | TXHWMP | 2012 | EPA-Approved Texas Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Texas | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vii) | ASTM G 21 | 1990 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(40) | ASTM D 396 | 1990 | Standard Specification for Fuel Oils | ASTM International | |
Food and Drug Administration | 21 CFR 173.375(a) | USP 30/NF 25 | 2007 | United States Pharmacopeia (USP)/National Formulary (NF) pp. 1700-1701 | U.S. Pharmacopeial Convention | |
Food and Drug Administration | 21 CFR 184.1697(b) | Food Chemicals Codex | 1981 | Riboflavin-5'-phosphate (Sodium) | National Academy Press | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(6)(iii) | IEC 61508-3 Corr. 1 | 1999 | Corrigendum 1- Part3: Software requirements | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (13) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(i) | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Consumer Product Safety Commission | 16 CFR 1218.2 | ASTM F2194 | 2013 | Standard Consumer Safety Specification for Bassinets and Cradles | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1) | RT Publication | 2000 | Parts List and Drawings, Part 572 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (HIII-5F, Alpha Version) | Reprographic Technologies | |
Housing and Urban Development Department | 24 CFR 200.945(a)(2) | ASTM D 418 | 1992 | Standard Methods of Testing Pile Yarn Floor Covering Construction (Withdrawn 1998) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (9) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Atrazine) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart DDDD, Table 6, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(1)(i) | ANSI Z12.12 | 1968 | Standard for the Prevention of Sulfur Fires and Explosions | American National Standards Institute | |
Food and Drug Administration | 21 CFR 178.3770(d)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(l)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 67.13(b) | DOC Publication 55DC | 1987 | Codes for Named Populated Places, Primary County Divisions, and Other Locational Entities of the United States and Outlying Areas | U.S. Department of Commerce | |
Energy Department | 10 CFR 430.3(m)(1) | NSF 51 | 2007 | Food Equipment Materials | National Sanitation Foundation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Coast Guard | 40 CFR 1065.701 Table 1 | ASTM D 6985 | 2004 | Standard Specification for Middle Distillate Fuel Oil--Military Marine Applications | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 181A | 1994 | Standard for Safety Closure Systems for use with Rigid Air Ducts and Air Connectors with 1998 revisions | Underwriters Laboratories, Inc. | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.51(b)(1) 249 | National Formulary | 1980 | Formula No. 25-A | U.S. Pharmacopeial Convention | |
Consumer Product Safety Commission | 16 CFR 1615.4(g)(4)(i) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 40 CFR 60.18(f)(3) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(160) | ASTM D 4457 | 1985 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.453(b)(5)(ii) | AWS D8.4 | 1961 | Recommended Safe Practices for Automotive Welding Design | American Welding Society | |
Coast Guard | 46 CFR 164.120-5(b)(10) | ASTM D 2583 | 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (23) | ASTM D 7284 | 2008 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) | IDEXX Colisure Test | 1994 | Detect coliforms/E. coli with the convenience of a long-read window | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 799.6756(e)(22) | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xvi) | ASTM D 7039 | 2013 | Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Interior Department | 43 CFR 11.42(a) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Coast Guard | 46 CFR 160.077-15(b)(12) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFr 572.173(c)(2) | Drawing No. 420-2060 | 2011 | Neck Cable | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Merphos [Tributyl phosphorotrithioate]) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(f)(9) | ASTM D 1310 | 1986 | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus | ASTM International |