This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 571.106 S6.4 | ASTM E 4 | 2003 | Standard Practices for Force Verification of Testing Machines | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Methoxychlor) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.104a(h)(5) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(132) | ASTM D 3270 | 1995 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.3(c)(1) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.146(c) | Drawing No. SA-572-S19 | 1987 | Load-moment Transducer | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Naled) | EPA Method 622 | 1993 | Organophosphorus Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 178.46(h)(2) | ASTM E 290 | 1992 | Standard Test Method for Semi-Guided Bend Test for Ductility of Metallic Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(f)(1)(ii) | SAE J-397 | 1969 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 55.14(d)(17)(i) | 40 CFR part 52, subpart II | 1992 | State of North Carolina Air Pollution Control Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 178.3770(a)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(3) | ASTM A 53 | 1998 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (1) | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Consumer Product Safety Commission | 16 CFR 1505.5(e)(5) | NFPA 70 | 1978 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.010-4(n) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | Federal Specifications Standards and Test Methods | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM B 539 | 1990 | Standard Test Method for Measuring Contact Resistance of Electrical Connections (Static Contacts) | ASTM International | |
Coast Guard | 33 CFR 154.1045(i)(2)(iii) | ASTM F 1413 | 2007 | Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-18 | 1968 | Taxiway Guidance Sign System | Federal Aviation Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 184.1914(b) | Food Chemicals Codex | 1981 | Trypsin | National Academy Press | |
Federal Railroad Administration | 49 CFR 232.603(a)(5) | AAR S-4240 | 2007 | ECP Brake Equipment—Approval Procedure | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (18) | USGS O-3105-83 | 1983 | Chlorophenoxy acids, total recoverable, gas chromatographic | U.S. Geological Survey | |
Housing and Urban Development Department | 24 CFR 3285.905(a) | NFPA 31 | 2001 | Standard for the Installation of Oil-Burning Equipment | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.390(i)(9) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.1 | BHMA A156.19 | 2002 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.11(k)(2) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.177(a)(5) | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 80.8(b) | ASTM D 4177 | 2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.948(a)(2) | ASTM D 3676 | 1983 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (14) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-59 | 1998 | Pelvic Assembly-Complete-Hybrid III | General Motors Corporation | |
Minerals Management Service | 30 CFR 250.1904(b) | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition | Center for Offshore Safety | |
Environmental Protection Agency | 40 CFR 147.2800(a)(3) | NMIUIC regulations | 1982 | CNMI Drinking Water Regulations, Commonwealth Register, Volume 4, Number 4 | Commonwealth of the Northern Mariana Islands | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASME RTP-1 | 2015 | Reinforced Thermoset Plastic Corrosion-Resistant Equipment | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(i) | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Research and Special Programs Administration | 46 CFR 111.60-21 | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets. | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(i) | ISO 9809-1 | 1999 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa, | International Organization for Standardization | |
Energy Department | 10 CFR 430.32(n)(2)(i) | ANSI C78.81 | 2010 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 52.741(e)(3)(ii)(A) | 35 I.A.C. 215, Subpart S | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 61.270(a) | ASTM D 835 | 1985 | Standard Specification for Refined Benzene--485 | ASTM International | |
Food and Drug Administration | 21 CFR 172.372(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 200.925c(c)(2) | SBCCI Standard Plumbing Code | 1991 | Standard Plumbing Code | Southern Building Code Congress International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(1)(ii) | ISO 2555:1989(E) | 1990 | Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity by the Brookfield test method, Second Edition | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (1) Alkalinity | USGS I-1030-85 | 1985 | Techniques of Water Resources Investigation of the U.S. Geological Survey, Book 5, Chapter A-I, 3rd Edition | U.S. Geological Survey | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | HUD-FHA and HUD-USER All Standards | 2013 | All HUD-FHA and HUD-USER specifications, standards, and codes without specific reference | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | USGS R-1141-76 | 1977 | Radium-226, dissolved. Radon emanation method | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.4415(a)(2) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S16.3.3.1.11 | Drawing No. TE-2504 | 1994 | H-Point Locator, Hybrid III 5th | Reprographic Technologies | |
Energy Department | 10 CFR 440 Appendix A | ASME CSD-1 | 1988 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers |