This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 31.10-45(a) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 160.135-5(d)(3) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(m) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 54.01-1(c)(2) | ASTM A 203/A 203M | 2007 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | ASTM International | |
Coast Guard | 46 CFR 160.151-15(g) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(e)(1) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, Part 1: General Principles, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.026-6(d) Table 160.026-6(d)(2) | MIL-W-15117 | 1990 | Water, drinking, canned, emergency | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.50-60(d)(2) | ASTM A 395/A 395M | 1998 | Ferritic Ductile Cast Iron Pressure Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Coast Guard | 46 CFR 111.87-3(a) | UL 1042 | 1994 | Standard for Electric Baseboard Heating Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.051-7(f) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 111.60-3(c) | MIL-C-24643A | 1994 | Military Specification Cables and Cords, Electric, Low Smoke, For Shipboard Use, General Specification For including Amendment 1 | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.170-5(b)(6) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Coast Guard | 21 CFR 131.162(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 109.105(b) | ASTM Adjunct F1626 | 1996 | Symbols Used in Accordance with Regulation II-2/20 of the 1974 SOLAS Convention as amended PCN: 12-616260-01 | ASTM International | |
Coast Guard | 21 CFR 145.135(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 10 CFR 430.2, Definitions, Shatter resistent lamp, shatter proof lamp, shatter protected lamp | NSF/ANSI 51 | 2007 | Food equipment materials | NSF International | |
Coast Guard | 46 CFR 162.060-28(g)(4)(v) | EPA Publication | 2008 | Vessel General Permit (VGP) requirements (VGP Section 5.8) | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 145.3(n) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 21 CFR 177.1610(a) | ASTM D 1303 | 1979 | Standard Method of Test for Total Chlorine in Vinyl Chloride Polymers and Copolymers | ASTM International | |
Coast Guard | 33 CFR 120.300(b) | MSC Circular 443 | 1986 | Measures to Prevent Unlawful Acts Against Passengers and Crews Aboard Ships | International Maritime Organization | |
Coast Guard | 21 CFR 184.1138(b) | Food Chemicals Codex | 1981 | Ammonium Chloride | National Academy Press | |
Coast Guard | 46 CFR 164.120-5(d)(6) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 108.105(c)(1) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 111.105-11(d) | ISA RP 12.6 | 1995 | Wiring Practices for Hazardous (Classified) Locations Instrumentation Part I: Intrinsic Safety | International Society for Measurement and Control | |
Coast Guard | 46 CFR 160.171-17(n) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 33 CFR 101.115(b) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-1 or SOLAS Chapter XI-2 | International Maritime Organization | |
Coast Guard | 33 CFR 157.02(b)(2) | IMO Resolution A.496(XII) | 1981 | Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(d)(7) | ISO 1183-1:2004(E) | 2004 | Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition | International Organization for Standardization | |
Coast Guard | 21 CFR 101.9(c)(6) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Coast Guard | 46 CFR 54.01-1(e)(1) | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(5)(ii) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 46 CFR 160.151-21(f) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.057-1(a)(2) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(ii) | EPA-600-4-79-020 | 1983 | Method 202.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 58.03-1(g)(1) | ASTM A 193/A 193M | 1998 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 183.320(d) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.30-10(b)(2) | ASME B16.5 | 2003 | Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 129.550(a) | NFPA 302 | 1989 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 199.261(g) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 53.01-1(b)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-25(a)(2)(ii) | IMO Resolution A.753(18) | 1993 | Guidelines for the Application of Plastic Pipe on Ships | International Maritime Organization | |
Coast Guard | 36 CFR 1238.20(b) | ISO 18901 | 2002 | Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability | International Organization for Standardization | |
Coast Guard | 40 CFR 1065.1010(e)(4) | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Coast Guard | 46 CFR 199.175(b)(28)(i) | ASTM F 1003 | 1992 | Standard Specification for Searchlights on Motor Lifeboats | ASTM International | |
Coast Guard | 46 CFR 58.60-9 | API RP 14C | 1986 | Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 139.120(d) | ANSI/ISO/ASQ Q9001-2000 | 2000 | Quality management systems—Requirements | American Society for Quality Control | |
Coast Guard | 46 CFR 184.240(c) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 38 CFR 17.82(a)(1)(i) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International |