This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 177.1430(c)(2) | ASTM D 445 | 1974 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.125(a)(10) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Veterans Affairs Department | 38 CFR 39.63 | IAPMO Publication | 2003 | Uniform Mechanical Code | International Association of Plumbing and Mechanical Officials | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.17(b) | ASTM IRM 903 | 2007 | Immersion Oil | ASTM International | |
Rural Utilities Service | 21 CFR 109.30(d) | FDA Publication | 1983 | Test Procedures for Determination of PCB Permeability of Food Packaging, Inner-Wraps | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(i) | ASTM D 1945 | 1996 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50 App. H, III, B, 1 | ASTM E 185 | 1973 | Standard Recommended Practice for Surveillance Tests for Nuclear Reactor Vessels | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(A) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12D | 1957 | Specification for Large Welded Production Tanks | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1728.201(h)(1)(i) | AWPA A1 | 2006 | Standard Methods for Analysis of Creosote and Oil-Type Preservatives | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (50) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.633(h)(2) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 4785 | 2000 | Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water (Superseded) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 3246 | 1996 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Coast Guard | 46 CFR 161.006-1(a)(2) | FedSpec QQ-B-611 | 1938 | Brass, Commercial: Bars, Plates, Rods Shape, Sheets and Strip | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 7460 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-386 | 1993 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 147.750(a)(1) | INUIC regulations | 1988 | Indiana Code, title 4, article 21.5, chapters 1 through 6 | State of Indiana | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5360-6 | 1976 | Airport Terminal Building Development with Federal Participation | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. 92041-002 | 1992 | Skull Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 260.11(c)(2) | EPA Method 1664 | 2015 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, PB99–121949 | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | SAE J-586 | 2000 | Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
Coast Guard | 46 CFR 52.01-135(c) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | APHA Method 4500-P G | 1999 | Phosphorus, Flow Injection Analysis for Orthophosphate | American Public Health Association | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. P, 4.2 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-15(h) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.60 Table 2 | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(d)(15) | ASME B16.22 | 2001 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Ind-01. Method EV-024 | 1993 | Analytical Procedures for Determining Total Tin and Triorganotin in Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(25) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | APHA Method 3111 C | 1999 | Metals by Flame Atomic Absorption, Extraction and Direct Aspiration | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(g)(27) | SAE J-2765 | 2008 | Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test Bench | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.94(b)(4)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Critical Radiant Flux | ASTM E 648 | 2000 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2201(b)(1) | TXUIC regulations | 1972 | Texas Water Code, Chapters 26, 27 and 29 (Vernon 1972 and Supp. 1982) | State of Texas | |
Environmental Protection Agency | 40 CFR 63.11173(e)(2)(i) | ASHRAE 52.1 | 1992 | Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate Matter | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(33) | ASTM A 369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.1109(f) | NFPA Publication | 1962 | National Fire Protection Association Handbook, 12th Edition | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 3285.4(g)(1) | FEMA 85 | 1985 | Manufactured Home Installation in Flood Hazard Areas | Federal Emergency Management Agency | |
Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(viii) | ASTM E 662 | 2001 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(1) | 29 CFR 1928.53 | 2021 | Protective Enclosures for Wheel-type Agricultural Tractors--Test procedures and performance requirements | Occupational Safety and Health Administration, U.S. Department of Labor | |
Interior Department | 43 CFR 11.18(a)(5) | DOI NRDAM/GLE | 1999 | The CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments Technical Documentation, Volumes I-IV, dated April 1996, including Revision I dated October 1997, and Revision II dated December 1999 | U.S. Department of the Interior | |
Research and Special Programs Administration | 49 CFR 178.338-2(a) | ASTM A 606 | 1975 | Steel Sheet and Strip, Hot-Rolled and Cold-Rolled, High Strength, Low Alloy, with Improved Atmospheric Corrosion Resistance | ASTM International | |
Food and Drug Administration | 21 CFR 211.176 | FDA Publication | 1989 | Procedures for Detecting and Measuring Penicillin Contamination in Drugs | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(79) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Coast Guard | 46 CFR 118.425(b) | NFPA 17A | 1994 | Wet Chemcial Extinguishing Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.74(a) | Drawing No. SA-6C-1610-4 | 1996 | Screw Button Head Socket | Reprographic Technologies |