This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 92.5(b)(11) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.507(d)(4) | NFPA 17 | 2002 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 13.121(e)(2) | IMO Resolution A.437 (XI) | 1998 | Training of Crews in Fire Fighting | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(1) | Drawing No. 78051-61X | 1997 | Head Assembly, Complete, Revision C | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 63.14(g)(22) | ASTM D 2369 | 1995 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Food and Drug Administration | 21 CFR 184.1193(b) | Food Chemicals Codex | 1981 | Calcium Chloride | National Academy Press | |
Consumer Product Safety Commission | 16 CFR 1616.5(a)(9) Footnote 3 | ASTM D 2654 | 1971 | Method of Test for Amount of Moisture in Textile Materials | ASTM International | |
Federal Aviation Administration | 14 CFR 36 Appendix J J36.109(d)(1)(iv) | IEC 651 | 1979 | Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 207.2 | ICC/IBC | 2001 | International Building Code | International Code Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | ASTM D 6919 | 2009 | Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 9 | EPA Method 100.1 | 1993 | Analytical Method For Determination of Asbestos Fibers in Water, EPA-600-4-83-043 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 7467 | 2010 | Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20), including Appendices X1 through X3 | ASTM International | |
Minerals Management Service | 30 CFR 250.803(a) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 820 | 2003 | Fire Protection in Wastewater Treatment and Collection Facilities | National Fire Protection Association | |
Coast Guard | 46 CFR 160.047-3(f)(2) | MIL-W-530 | 1989 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Rural Utilities Service | 21 CFR 176.170(a)(5) | ASTM D 611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(i) | ASTM D 1946 | 1977 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | ASTM D 3557B | 1990 | Cadmium in Water Atomic Absorption | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (16) | APHA Method 4500-Cl D | 1997 | Chlorine, Amperometric direct | American Public Health Association | |
Rural Utilities Service | 7 CFR 1728.201(h)(1)(ii) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
Energy Department | 10 CFR 433.5(a)(1) | ASHRAE 90.1 | 2004 | Energy Standard for Buildings Except Low-Rise Residential Buildings | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Rural Utilities Service | 7 CFR 1728.97(a)(18) | RUS Bulletin 50–73 (U–5) | 1977 | RUS Specification for Pad-Mounted Transformers (Single and Three-Phase) | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 98.7(e)(10) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 57.02-2(b) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(viii) | EPA Method 9060A | 2004 | Total Organic Carbon, Revision 1 | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | Aluminum Design Manual | 1994 | Specifications and Guidelines for Aluminum Structures, Part 1-A, Sixth Edition | Aluminum Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(6) | ANSI A13.1 | 1956 | Scheme for the Identification of Piping Systems | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.508(bb)(8) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.156-11(c)(1)(2)(B) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(J) | AOAC Method 973.48 | 1998 | Nitrogen (Total) in Water - Kjeldahl Method | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C4 | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1625(b)(9) | ASTM D 7520 | 2013 | Standard Test Method for Determining the Opacity in a Plume in an Outdoor Ambient Atmosphere | ASTM International | |
Food and Drug Administration | 21 CFR 135.130(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
National Highway Traffic Safety Administration | 49 CFr 572.136(b)(1) | Drawing No. 880105-528L | 1987 | Sliding knee assembly, left | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Endrin) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 8.4 | EPA-600-9-89-072 | 1989 | The Partitioning of Metals in Rotary Kiln Incineration. Proceedings of the Third International Conference on New Frontiers for Hazardous Waste Management, p. 555 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 14 CFR 150 Appendix A A150.5(b) | SAE ARP 796 | 1969 | Measurement of Aircraft Exterior Noise in the Field | Society of Automotive Engineers | |
Coast Guard | 21 CFR 155.3(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.3.9 | SAE J-211/1 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Coast Guard | 33 CFR 154.106(d)(6) | ASTM F 1413 | 2007 | Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems | ASTM International | |
Coast Guard | 46 CFR 56.01-2(b)(1) | ANSI/ASME B1.1 | 1982 | Unified Inch Screw Threads (UN and UNR Thread Form) | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Research and Special Programs Administration | 21 CFR 177.1050(c)(3) | FDA Publication | 1989 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 40 CFR 136.3(a) Table IF (Acetonitrile) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(77) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(68) | ANSI/API Spec. Q1 | 2008 | Specification for Quality Programs for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
Coast Guard | 46 CFR 160.002-4(c)(1) | DWG No. F-49-6-1 (Sheet 2) | 2012 | Pad Detail (Adult) | U.S. Coast Guard |