This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 436.21(c) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Mine Safety and Health Administration | 30 CFR 57.12047 | NIST Handbook 81 | 1961 | Safety Rules for the Installation and Maintenance of Electric Supply and Communication Lines | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1910.6(j)(1) | NIST CS 202-56 | 1961 | Industrial Lifts and Hinged Loading Ramps | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(23) | ANSI O1.1 | 1961 | Safety Code for Woodworking Machinery | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(1) | UL 58 | 1961 | Standard for Steel Underground Tanks for Flammable and Combustible Liquids, Fifth Edition | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 436.31(c) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Occupational Safety and Health Administration | 29 CFR 1910.6(u)(5) | SAE J-765 | 1961 | Recommended Practice for Crane Loading Stability Test Code | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.67(c)(5)(ii) | AWS D8.4 | 1961 | Recommended Safe Practices for Automotive Welding Design | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(21) | NFPA 91 | 1961 | Standard for the Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API Bulletin 2509 B | 1961 | Shop Testing of Automatic Liquid Level Gages | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.180(c)(1)(iii) | SAE J-765 | 1961 | Recommended Practice for Crane Loading Stability Test Code | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.453(b)(5)(ii) | AWS D8.4 | 1961 | Recommended Safe Practices for Automotive Welding Design | American Welding Society | |
Environmental Protection Agency | 40 CFR 436.41(c) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Occupational Safety and Health Administration | 29 CFR 1910.180(e)(2)(iii)(A) | SAE J-765 | 1961 | Recommended Practice for Crane Loading Stability Test Code | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 58 | 1961 | Steel Underground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(3) | API 12F | 1961 | Specification for Small Welded Production Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 436.181(c) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | NFPA 91 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(20)(i) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.30(a)(3) | NIST CS 202-56 | 1961 | Industrial Lifts and Hinged Loading Ramps | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 434.11(n) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Labor Department | 41 CFR 50-204.67 | CGA G-4 | 1962 | Oxygen | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(2) | CGA C-8 | 1962 | Standard for Requalification of ICC-3HT Cylinders | Compressed Gas Association | |
Mine Safety and Health Administration | 30 CFR 77.301(b) | NFPA Handbook | 1962 | Section 9, Installation of Pulverized Fuel Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Subpart S | ASTM C 34 | 1962 | Structural Clay Load-Bearing Wall Tile | ASTM International | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(14) | ASTM D 86 | 1962 | Test for Distillation of Petroleum Products | ASTM International | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.119(b) Boiling Point | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(t)(2) | USPHS Publication 934 | 1962 | Food Service Sanitation Ordinance and Code, Part V of the Food Service Sanitation Manual | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.6(p)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.252(a)(1) | NFPA 51B | 1962 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Labor Department | 41 CFR 50-204.75 | NCUTLO Code | 1962 | Uniform Vehicle Code, Chapters 10, 11, 12, and 14 | National Committee on Uniform Traffic Laws and Ordinances | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(9) | NFPA 51B | 1962 | Standard for Fire Protection in Use of Cutting and Welding Processes | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(5) | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Food and Drug Administration | 21 CFR 172.882(a) | AOAC Publication | 1962 | Spectrophotometric Measurements under Specification | AOAC International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NIST CS 242 | 1962 | 1-3/4 inch Thick Steel Doors and Frames | National Institute of Standards and Technology, U.S. Department of Commerce | |
Labor Department | 41 CFR 50-204.65 | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Mine Safety and Health Administration | 30 CFR 77.1109(f) | NFPA Publication | 1962 | National Fire Protection Association Handbook, 12th Edition | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 77.1109(a) | NFPA Publication | 1962 | Portable Fire Extinguisher Standards | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.254(b)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.101(a) | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association |