Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Standards Incorporated by Reference (SIBR) Database

Download PDF

NOTE: This database has not been updated since August 16, 2016 and is being provided as a source for historical data. Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information may contain errors or be incomplete.

Use the CSV record export feature to download an export file of the data. The current search filters will be applied to the export. All pages of the current search result will be included in the export, not just the current page.

Displaying 301 - 350 of 24211
Incorporated by (Agency) FR Citation Sort ascending CFR Citation Document Number Title of Standard Standard Publishing Organization
Federal Communications Commission 80 FR 33442 47 CFR 2.948 (e) ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories International Organization for Standardization
Federal Communications Commission 80 FR 33442 47 CFR 2.948 (e) ISO/IEC 17011 Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies International Organization for Standardization
Federal Communications Commission 80 FR 33442 47 CFR 2.948 (d)  ANSI C63.4-2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Institute of Electrical and Electronics Engineers
Federal Communications Commission 80 FR 33442 47 CFR 2.948 (d) CISPR 16-1-4:2010-04 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4: Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements International Electrotechnical Commission
Federal Communications Commission 80 FR 33439 47 CFR 2.910(c)(1) ANSI C63.4-2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz American National Standards Institute
Federal Communications Commission 80 FR 33439 47 CFR 2.910(c)(2) ANSI C63.10-2013 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices American National Standards Institute
Federal Communications Commission 80 FR 33439 47 CFR 2.910(d)(1) ISO/IEC 17011:2004(E) Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies International Organization for Standardization
Federal Communications Commission 80 FR 33439 47 CFR 2.910(d)(2) ISO/IEC 17025:2005(E) Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies International Organization for Standardization
Federal Communications Commission 80 FR 33439 47 CFR 2.910(d)(3) ISO/IEC 17065:2012(E) Conformity assessment—Requirements for bodies certifying products, processes and services International Organization for Standardization
Federal Communications Commission 80 FR 33439 47 CFR 2.910(d)(4) ISO/IEC Guide 58:1993(E) Calibration and testing laboratory accreditation systems—General requirements for operation and recognition International Organization for Standardization
Federal Communications Commission 80 FR 33439 47 CFR 2.910(d)(5) ISO/IEC Guide 61:1996(E) General requirements for assessment and accreditation of certification/registration bodies International Organization for Standardization
Federal Communications Commission 80 FR 33439 47 CFR 2.910(d)(6) ISO/IEC Guide 65:1996(E) General requirements for bodies operating product certification systems International Organization for Standardization
Federal Communications Commission 80 FR 33439 47 CFR 2.910(b)(1) CISPR 16-1-4:2010-04 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4: Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements International Electrotechnical Commission
Consumer Product Safety Commission 80 FR 25226 16 CFR 1120.4 (b)(1) ASTM F 1816-97 Standard Safety Specification for Drawstrings on Children's Upper Outerwear ASTM International
Consumer Product Safety Commission 80 FR 25226 16 CFR 1120.4 (c)(1) UL 588 Standard for Safety for Seasonal and Holiday Decorative Products Underwriters Laboratories, Inc.
Consumer Product Safety Commission 80 FR 25226 16 CFR 1120.4 (c)(2) UL 859 Standard for Safety for Household Electric Personal Grooming Appliances Underwriters Laboratories, Inc.
Consumer Product Safety Commission 80 FR 25226 16 CFR 1120.4 (c)(3) UL 1727 Standard for Safety for Commercial Electric Personal Grooming Appliances Underwriters Laboratories, Inc.
National Archives and Records Administration 74 FR 51014 36 CFR 1235.46(c)(1) ANSI/NISO/ISO 9660 American National Standard for Volume and File Structure of CD-ROM for Information Exchange American National Standards Institute
National Archives and Records Administration 74 FR 51014 36 CFR 1235.46(b)(1) ANSI X3.39 American National Standard: Recorded Magnetic Tape for Information Interchange (1600 CPI, PE) American National Standards Institute
National Archives and Records Administration 74 FR 51014 36 CFR 1235.46(b)(1) ANSI X3.54 American National Standard: Recorded Magnetic Tape for Information Interchange (6250 CPI, Group Coded Recording) American National Standards Institute
National Archives and Records Administration 74 FR 51014 36 CFR 1235.46(b)(2) ANSI X3.180 American National Standard: Magnetic Tape and Cartridge for Information Interchange—18-Track, Parallel, 1⁄2 inch (12.65 mm), 37871 cpi (1491 cpmm), Group-Coded—Requirements for Recording American National Standards Institute
National Archives and Records Administration 74 FR 51014 36 CFR 1235.46(b)(3) ISO/IEC 15307 Information technology—Data interchange on 12,7 mm 128-track magnetic tape cartridges—DLT 4 format International Organization for Standardization
National Archives and Records Administration 74 FR 51014 36 CFR 1235.46(b)(3) ISO/IEC 15896 Information technology—Data interchange on 12,7 mm 208-track magnetic tape cartridges—DLT 5 format International Organization for Standardization
National Archives and Records Administration 74 FR 51014 36 CFR 1235.46(b)(3) ISO/IEC 16382 Information technology—Data interchange on 12,7 mm 208-track magnetic tape cartridges—DLT 6 format International Organization for Standardization
Occupational Safety and Health Administration 29 CFR 1910.6(z)(2) UN ST/SG/AC.10/Rev.4 UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fourth Revised Edition United Nations
Coast Guard 40 CFR 60.335(a)(3) EPA Method 3 Gas analysis for the determination of dry molecular weight U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 75.6(a)(14) ASTM D 1945 Standard Test Method for Analysis of Natural Gas by Gas Chromatography ASTM International
Coast Guard 33 CFR 164.46(a)(2) IMO SOLAS International Convention for the Safety of Life at Sea International Maritime Organization
Coast Guard 46 CFR 164.120-7, Table 164.120-7(d)(5)(ii) ASTM D 790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ASTM International
Environmental Protection Agency 40 CFR 136.3(a) Table IB (33) ASTM D 511B Magnesium by Flame Atomic Absorption ASTM International
Environmental Protection Agency 40 CFR 141.23(k)(1) Table (6) Beryllium APHA Method 3113 B Metals by Graphite Furnace Atomic Absorption American Public Health Association
Coast Guard 46 CFR 160.132-7(b)(1)(iii) ASTM A 216/A 216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service ASTM International
National Highway Traffic Safety Administration 49 CFR 572.180(a)(4) SAE J-211/1 Instrumentation for Impact Tests—Part 1—Electronic Instrumentation Society of Automotive Engineers
Environmental Protection Agency 40 CFR 136.3(b)(3)(ii)(B) EPA Method 200.8 Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma Mass Spectrometry. Revision 5.3 U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 435.11(u) EPA-821-R-11-004 Analytic Methods for the Oil and Gas Extraction Point Source Category U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 80.582(d)(1) ASTM D 6299 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance ASTM International
National Archives and Records Administration 36 CFR 1238.5(e)(4) ISO 3334 Micrographics--ISO Resolution Test Chart No. 2--Description and Use International Organization for Standardization
Coast Guard 33 CFR 155.140(f)(1) OCIMF Publication Ship to Ship Transfer Guide (Petroleum), 2nd Edition Oil Companies International Marine Forum
Environmental Protection Agency 40 CFR 147.300(a)(4) COUIC regulations Oil and Gas Conservation Commission Revised Rules and Regulations in the 300, 400, 500, and 600 series, effective March 20, 1989. State of Colorado
Environmental Protection Agency 40 CFR 63.5935 Corrosion-resistant industry standard ASTM D 3517 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe ASTM International
Occupational Safety and Health Administration 29 CFR 1910.110(b)(20)(iv)(D) NFPA 96 Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment National Fire Protection Association
Mine Safety and Health Administration 30 CFR 57.5047(b) ANSI N13.8 Radiation Protection in Uranium Mines American National Standards Institute
Coast Guard 46 CFR 111.54-1(a)(1) NEC 2002 National Electrical Code Handbook National Fire Protection Association
Research and Special Programs Administration 21 CFR 176.170(a)(5) ASTM D 5 Standard Test Method for Penetration of Bituminous Materials ASTM International
Environmental Protection Agency 40 CFR 136.3(a) Table IH (5) APHA Method 9221 F Multiple Tube Fermentation Qualitative (LTB/EC MUG): Total Coliform and E. Coli American Public Health Association
Environmental Protection Agency 40 CFR 98.74(c)(1) ASTM D 1945 Standard Test Method for Analysis of Natural Gas by Gas Chromatography ASTM International
Health and Human Services Department 45 CFR 162.1302(b)(1) NCPDP Publication Batch Standard Batch Implementation Guide, Version 1, Release 1 National Council for Prescription Drug Programs
Environmental Protection Agency 40 CFR 75.6(f)(1) API MPMS Chapter 3, Section 2 American Petroleum Institute
Research and Special Programs Administration 49 CFR 173.21(f) UN Publication UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria United Nations
Coast Guard 46 CFR 116.300(b)(2) ABS Publication Guide for Building and Classing High Speed Craft American Bureau of Shipping

Accessing Standards Incorporated by Reference

This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).

More information