This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(3) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(8) | API RP 2FPS | 2001 | Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe, Third Edition, Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(50) | API MPMS | 2009 | Chapter 14.5/GPA Standard 2172-09; Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(j)(2) | ISO/IEC 17021-1 | 2015 | Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements | International Organization for Standardization |
Safety and Environmental Enforcement Bureau | 30 CFR 250.858(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(23) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.908(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(2) | API 570 | 2016 | Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(17) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(2) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(66) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(67) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(8) | API RP 2FPS | 2001 | RP for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1703(b) | ANSI/API Spec. 11D1 | 2009 | Packers and Bridge Plugs | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(79) | API RP 75 | 2008 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities, Third Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1903 | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition | Center for Offshore Safety | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(11) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(19) | API MPMS | 2005 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(24) | API MPMS | 2007 | Chapter 7 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(83) | API Spec. 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 81 FR 36150 | 30 CFR 250.901(a)(24) | NACE RP0176-2003 | 2003 | Standard Recommended Practice, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production | National Association of Corrosion Engineers |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.814 (d) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(n)(3) | COS Safety Publication COS-2-04 | 2012 | Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(60) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(35) | API MPMS | 2007 | Chapter 10—Sediment and Water, Section 2—Standard Test Method for Water in Crude Oil by Distillation | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(23) | API MPMS | 2007 | Chapter 6, Section 7 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(f)(2) | 2017 ASME Boiler and Pressure Vessel Code | 2017 | Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(c)(1) | API RP 14F | 2008 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Upstream Segment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(18) | API MPMS | 2005 | Chapter 5, Section 3 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(2)(iii)(A) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(51) | API MPMS | 1991 | Chapter 14—Natural Gas Fluids Measurement, Section 6—Continuous Density Measurement | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(k)(1) | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations | Center for Offshore Safety |
Safety and Environmental Enforcement Bureau | 30 CFR 250.859(a)(1) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(3) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(70) | ANSI/API Spec. 6A, | 2005 | Specification for Wellhead and Christmas Tree Equipment, Nineteenth Edition, July 2004; Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(4) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(22) | API RP 2SM | 2007 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(22) | AWS D3.6M | 1999 | Specification for Underwater Welding | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(68) | API RP 14E | 1991 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(9) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures; Third Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.470 (g) | API RP 2N | 2021 | Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(80) | API MPMS | 2007 | Chapter 4—Proving Systems, Section 8—Operation of Proving Systems; First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1903 | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2007 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute |