DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.1.1.4 | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(v)(B) | ANSI B31.5 | 1966 | Refrigeration Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(g)(1)(i)(E)(1) | NFPA 385 | 1966 | Recommended Regulatory Standards for Tank Vehicles for Flammable and Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(4) | CGA G-7.1 | 1966 | Commodity Specification | Compressed Gas Association | |
Coast Guard | 46 CFR 164.120-5(e)(1) | MIL-R-7575C | 1966 | Military Specification, Resin, Polyester, Low-Pressure Laminating | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(28) | ANSI B31.5 | 1966 | Refrigeration Piping | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(96) | API Standard 2552 | 1966 | USA Standard Method for Measurement and Calibration of Spheres and Spheroids | American Petroleum Institute |
Labor Department | 41 CFR 50-204.66(a) | CGA G-1 | 1966 | Acetylene | Compressed Gas Association | |
National Highway Traffic Safety Administration | 21 CFR 178.3870(f)(4) | ASTM D 1824 | 1966 | Standard Test Method for Apparent Viscosity of Plastisols and Oranosols at Low Shear Rates by Brookfield Viscometer | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(29) | NFPA 385 | 1966 | Recommended Regulatory Standard for tank Vehicles for Flammable and Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1966 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(6) | ASTM B 88 | 1966 | Seamless Copper Water Tube | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(97) | API Standard 2555 | 1966 | Method for Liquid Calibration of Tanks | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(42) | ANSI K61.1 | 1966 | Safety Requirements for the Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Coast Guard | 33 CFR 118.3(c) | FHWA Publication | 1966 | Standard Alphabets for Highway Signs | Federal Highway Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 84.141(b) | CGA G-7.1 | 1966 | Commodity Specification for Air | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.3.2(a) | ASTM D 2515 | 1966 | Standard Specification for Kinematic Glass Viscosity | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(32) | ASTM E 308 | 1966 | Standard Practice for Spectrophotometry and Description of Color in CIE 1931 System | ASTM International | |
Labor Department | 41 CFR 50-204.66(c) | CGA G-1.4 | 1966 | Standard for Acetylene Cylinder Charging Plants | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.253(d)(1)(i)(A) | ASTM B 88 | 1966 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(6) | API 650 | 1966 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(24) | ASTM D 2161 | 1966 | Conversion Tables for SUS | ASTM International | |
Coast Guard | 46 CFR 164.120-7(a)(1)(i) | MIL-R-7575C | 1966 | Military Specification, Resin, Polyester, Low-Pressure Laminating | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(6) | NFPA 385 | 1966 | Standard for Tank Vehicles for Flammable and Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(17) | SAE J-959 | 1966 | Lifting Crane Wire-Rope Strength Factors | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(31) | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(37) | ASTM D 2161 | 1966 | Standard Method of Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(58) | ANSI Z33.1 | 1966 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.3.3(b) | ASTM E 77 | 1966 | Standard Method for Inspection, Test and Standardization of Liquid-in-Glass Thermometers | ASTM International | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(ii) | IEC 225 | 1966 | Octave, Half-Octave, Third Octave Band Filters Intended for the Analysis of Sounds and Vibrations | International Electrotechnical Commission | |
Labor Department | 41 CFR 50-204.68 | CGA G-5.2 | 1966 | Standard for Liquefied Hydrogen Systems at Consumer Sites | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 571.3, Torso line | SAE J-787b | 1966 | Motor Vehicle Seat Belt Anchorage | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.3.6(a) | ASTM D 2515 | 1966 | Standard Specification for Kinematic Glass Viscosity | ASTM International | |
Public Health Service | 42 CFR 84.79(c) | CGA G-7.1 | 1966 | Commodity Specification for Air | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 178.3870(f)(4) | ASTM D 1824 | 1966 | Standard Test Method for Apparent Viscosity of Plastisols and Oranosols at Low Shear Rates by Brookfield Viscometer | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AWS D1.0 | 1966 | Code for Welding in Building Construction | American Welding Society | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(21) | ASTM D 2515 | 1966 | Standard Specification for Kinematic Glass Viscometers | ASTM International | |
Coast Guard | 46 CFR 164.120-7(a)(2) | MIL-R-7575C | 1966 | Military Specification, Resin, Polyester, Low-Pressure Laminating | U.S. Department of Defense | |
Coast Guard | 33 CFR 118.160(d)(2) | FHWA Publication | 1966 | Standard Alphabets for Highway Signs | Federal Highway Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.1.2 | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Public Health Service | 42 CFR 84.79(d) | CGA G-7.1 | 1966 | Commodity Specification for Air | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1926.152(g)(2) | NFPA 385 | 1966 | Recommended Regulatory Standards for Tank Vehicles for Flammable and Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(4) | NFPA 34 | 1966 | Standard for Dip Tanks Containing Flammable or Combustible Liquids | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 177.2480(c)(4) | ASTM D 2133 | 1966 | Standard Specification for Acetal Resin Injection Molding and Extrusion Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(iii) | ANSI B31.5 | 1966 | Refrigeration Piping | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.1.2.1 | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 178.45(f)(5)(ii) | NIST Handbook H-28 | 1966 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(2) | NFPA 197 | 1966 | Training Standard on Initial Fire Attack | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(4) | AWS D1.0 | 1966 | Code for Welding in Building Construction | American Welding Society | |
Research and Special Programs Administration | 49 CFR 178.356-2(e) | AWS D1.0 | 1966 | Code for Welding in Building Construction | American Welding Society |